Is there are way to add print time criteria to a CrossTab query? Everytime I try I get a message "The Microsoft Data engine does not recogonize [Forms]![FrmSalesCategoryByMonth]![Period] as a valid field name or expression". Any ideas?
Valerie
I have a table that has three columns: Nationality, Gender, and Date. First I had the problem of grouping the Nationality column by Gender. That i resolved by creating a crosstab query. Now, I want to put a criteria on Date field so that when the query is run it will ask for the date input and will only show the Nationality and Gender result for specific dates. But when I write something in Criteria field it shows an error saying: "The Microsoft Access database engine does not recognize "[Registration Date]" as a valid field name or expression"..
View 3 Replies View RelatedI have a table of data going back to 2007 that needs to be looked at on a monthly/quarterly/annual basis. I am able to filter the data when running a normal query by using
Between [Start Date] and [End Date]
in the Criteria section of the Date field. I now need to apply this same idea to a crosstab query. My current set up is:
[Gender]- Group By / Row Heading
[Plan Type]- Group By / Column Heading
[Pmt Amt]- Sum / Value
[Date]- Where / Criteria = Between [Start Date] and [End Date]
I am getting an error message that says:"The Microsoft Office Access database engine does not recognize '[Start Date]' as a valid field name or expression."Am I setting something up incorrectly or is it impossible to use input prompts in a crosstab query like this?
New to this site. very impressing
I am trying to create a crosstab query, but can get it right.
Table1 = input Table
__________________________________________________ ___________
name StartDate date Present
A 1201 1201 P
B 1202 1205 P
C 1203 1206 P
D 1204 1207 P
E 1206 1209 P
Can get this result with Crosstab Query;
TRANSFORM NZ(First([Table1].[Present]),"a") AS FirstOfPresent
SELECT Table1.name, Table1.StartDate
FROM Table1
GROUP BY Table1.name, Table1.StartDate
PIVOT Table1.date;
__________________________________________________ ____________
name StartDate 1201 1205 1206 1207 1209
A1201 P a a a a
B 1202 a P a a a
C 1203 a a P a a
D 1204 a a a P a
E 1206 a a a a P
But am looking to add NA for StartDate > Header Date(1201,1205,1206,1207,1209). See below. Does anyone have a solution or an alternate method
Looking to get this type of results
__________________________________________________ ____________
nameStartDate12011205120612071209
A1201 Paaaa
B1202 NAPaaa
C1203 NAaPaa
D1204 NAaaPa
E1206 NANAaaP
A=Absent
P=Present
NA=Non Applicable
Thanks Tony
Hi,
Ive been through several of these threads, but I still cant figure this out.
I have a crosstab query in which I would like to put a criteria. I understood that I have to use parameters for this. But, the restriction I would like to impose on my crosstab query is not directly,but indirectly linked to the variables in the crosstab. I tried to add the other table in order to insert the directly linked variable, but this confuses the whole crosstab (I get duplicate rows).
Is there a way i can fix this?
Thank you
Stacey
Hi all, I am utterly unsure if what I want to do is even possible:
I have two crosstab queries, qryRewCOCredit and qryWrapCOCredit which show the changeover (CO) times for the specified machine when they are NOT zero. (all zero entries don't show up).
There are many cases when there is a CO for the Rewinder on a specific day, but not for the Wrapper, and vice versa.
I want to make another crosstab query which performs a calculation. To keep it simple:
If (RewCOCredit>WrapCOCredit) Then
5-RewCOCredit
Else 'WrapCOCredit>RewCOCredit
5-WrapCOCredit
Please help!!!
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code:
TRANSFORM
IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT
SELECT
PT_LEVEL.INF_YEAR,
PT_LEVEL.INF_MONTH,
PT_LEVEL.UNIT
[code]...
:confused:
I am trying to help someone with a complex problem (so it seems to me) but I will first ask about what should be a simple thing....
First goal: to COUNT the number of times a TYPE of visit is made.
There are several different TYPEs but only interested in tracking 2 of them.
When a crosstab query is created - if one of the 2 parameters are not "met", a blank is returned. I have been reading posts about using NZ and IIf IsNull, etc to get past that - but none of them make any sense to me and the Access help suggestions do not work. Hope someone can make it clear with this information: (can't give more specifics to keep privacy intact)
The SQL was written by Access not by me. :)
Here is an example of the Crosstab SQL (which is using a previous query):
TRANSFORM Count([qryTest2.TYPE]) AS CountOfTYPE
SELECT qryTest2.CID
FROM qryTest2
GROUP BY qryTest2.CID
PIVOT qryTest2.TYPE;
-----------
qryTest2 SQL: (Grouping by to remove dups)
SELECT DISTINCTROW tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
FROM tblM LEFT JOIN tblC ON tblM.[M#] = tblC.[M#]
GROUP BY tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
HAVING (((tblC.TYPE)="Out" Or (tblC.TYPE)="In"))
ORDER BY tblM.CID, tblM.LNAME, tblM.FNAME;
Thanks for you time! :)
I have a database which among other things records how jobs are received i.e.: Telephone, Email, Mail, Facsimile or Web.For each client I want to identify the percentages of each method of receipt against the total of jobs received and during different time periods.I have created a make table query for all jobs received between variable dates for a client entry of the name of the client and the start and finish dates are required to run the query.
I have a crosstab query set up to count each method of receipt and a final query to work out the percentages using the total from the crosstab query fields divided by the total of all methods.I have a macro set up to replace the table with new data when I want the stats for a different client between new dates, therefore the different methods of receipt may vary for the less active clients i.e.: they may only have telephone and email .
My problem is if I choose a client where we have not received a job by a particular method (say web or facsimile), the last query working out the percentages has fixed names to cover each method but naturally produces an error when it cannot find a corresponding method of receipt. I have experimented with NZ() without success.My question is can I either have preset standard names of the column field in a crosstab query? Alternatively in the query calculating the percentages, can I include code to ignore a non-existent field in the crosstab query.
Hello All,
Your Help Required. I have send you a Database, in which I have used Crosstab query, I just want when I select the report from switchboard, and enter the datefrom / dateto (fields names) than click the preview report. Required report is open.
I have faced following problems
1-When I have selected the report and click the preview button. Report is not opened.
2-I have used cross tab query and link with the switchboard. But when I have run the query this msg is appeared “Microsoft Jet engine Does not recognized these field(name)”
Thanx
ami
I am am wondering if it is possible to create a crosstab query that displays alphanumeric values and not numeric (computational) values.
Ex:
Table contains the following details:
Name Branch
Bob 111
Bob 222
Joe 333
Pam 444
I want to use a crosstab so I can view the data as follows:
Name Branch1 Branch2
Bob 111 222
Joe 333
Pam 444
Is this possible? I've been playing around with it and it doesnt look doable. Perhaps there is a better way of getting the data into this format? Any suggestions would be greatly appreciated!
Super Thanx.
O.
Hi all
I'm trying to create a crosstab query with criteria that refers to a combo box on a form to allow me to filter data before the query is created. However when I refer to the combo box (e.g. = forms!frmSite!CmbSiteName) I am told that access does not recognise this as a 'valid field name or expression'. With a normal select query I dont have the same problem. Is there a way around this?
Cheers
Rhys
Hi, I have a crosstab query I have set up, calculating the cost of a product per month
it should look like
1 2 3 4
gek22 £55 £66 £77 £88
er44 £99 $100 £101 £102
tt66 £103 £104 £105 £106
but instead it looks like
1 2 3 4
gek22 £55 £88
gek22 £66
gek22 £77
er44 £99
er44 $100 £102
er44 £101
tt66 £103 £106
tt66 £103
tt66 £104 £105
Admittedly this is my first time doing a crosstab query, but I have both my column and rowe headers set to group by, I kinda assumed this would group them in much the same way a pivot table does in excel
Any help on this would be great
Hmm, doesnt want to keep the spacing in it :( hopefully you can get the idea
I have a report based on a crosstab query and the data changes every time the report is run even though the data is not updated. Can anyone shed some light?
View 1 Replies View RelatedI have a table with the following info:
Date/shift/name
1-1-07/1/tom
1-1/07/1/Bill
1-1-07/2/frank
1-1-07/2/Ben
1-1-07/3/Scott
1-1-07/3/Terry
1-2-07/1/tom
1-2/07/1/Bill
1-2-07/2/frank
1-2-07/2/Ben
1-2-07/3/Scott
1-2-07/3/Terry
1-3-07/1/tom
1-3/07/1/Bill
1-3-07/2/frank
1-3-07/2/Ben
1-3-07/3/Scott
1-3-07/3/Terry
What I want is the date to be displayed horizontally and the the names vertically with the shift as the intersection:
1-1-07 1-2-07 1-3-07
Tom 1 1 1
Bill 1 1 1
Frank 2 2 2
Ben 2 2 2
Scott 3 3 3
Terry 3 3 3
is this possible with a crosstab query or do I have to go about doing it some other way? If a crosstab query is possible how do you go about doing it?
Any help would be greatly appreciated.
I need help with a crosstab query ( :eek: ). I would like the column headings to be the last 6 months, the row headings to be billers, and the data in the middle to be both the date that a payment was made (falling within the month headings) and also the amount paid in that payment. Sometimes there might be more than one payment to a biller in a month or there might be no payments to that biller in a month. All of the raw data needed is in one table. I have read about crosstab queries, tried to use the wizard, and looked at examples but I can't get it to work:confused: . Could someone show me how this should be written? :)
Something like this is what I need:
_______________Jan______________Feb_____________Ma r__________Apr
Power............1/3....200..............2/4...250...........3/7....225........4/5.....250
Lease............1/15...1200..........2/15...1200..........3/16..1200.......4/20...1200
Insurance.......1/16...175.............2/20...175...................0.....................0
.............................................. 2/26...350
Water/Gas.......1/6...150.............2/10...175...........3/3...150.........4/10...175
Thanks a lot...
Hi,
I need a query which displays data as a crosstab query would but gives me the capability to edit data in the query. Basicaly, I have a Resource column, a Month column, and an Allocation column (among others). I need the months to appear in columns and the allocations to be summed by month. (Months are never repeated though, so it's not really a sum...) Can anyone help me out on this?
Thanks!
My crosstab query doesn't take the textbox value from the form. It says it doesnt recognize [forms]![frmMain]![txtEndDate] as a valid field name or expression. How can I solve this?
TRANSFORM Sum(tblDowntimeHrs.downtimeHrs) AS downtimeHrsOfSum
SELECT tblEquipmentType.Equipment_Type
FROM tblEquipmentType INNER JOIN (tblCategory INNER JOIN tblDowntimeHrs ON tblCategory.category = tblDowntimeHrs.category) ON tblEquipmentType.type = tblDowntimeHrs.type
WHERE (((tblDowntimeHrs.date)>=[Forms]![frmMain]![txtStartDate] And (tblDowntimeHrs.date)<=[forms]![frmMain]![txtEndDate]))
GROUP BY tblEquipmentType.Equipment_Type
PIVOT tblCategory.category_description;
in my select query with the same table, it works fine:
SELECT tblEquipmentType.Equipment_Type, tblCategory.category_description, Sum(tblDowntimeHrs.downtimeHrs) AS downtimeHrsOfSum
FROM tblEquipmentType INNER JOIN (tblCategory INNER JOIN tblDowntimeHrs ON tblCategory.category = tblDowntimeHrs.category) ON tblEquipmentType.type = tblDowntimeHrs.type
WHERE (((tblDowntimeHrs.date)>=[Forms]![frmMain]![txtStartDate] And (tblDowntimeHrs.date)<=[forms]![frmMain]![txtEndDate]))
GROUP BY tblEquipmentType.Equipment_Type, tblCategory.category_description;
thanks.
i have this crosstab query that works fine
TRANSFORM Sum(VoosAeronTbl.ATE) AS SomaDeATE
SELECT AeronaveTbl.Registo
FROM MissaoTbl INNER JOIN (AeronaveTbl INNER JOIN VoosAeronTbl ON AeronaveTbl.MatriculaID = VoosAeronTbl.MatriculaID) ON MissaoTbl.MissaoID = VoosAeronTbl.MissaoID
GROUP BY AeronaveTbl.Registo
PIVOT MissaoTbl.MISSAO;
when I try to select between dates set on a form field like this...
TRANSFORM Sum(VoosAeronTbl.ATE) AS SomaDeATE
SELECT AeronaveTbl.Registo
FROM MissaoTbl INNER JOIN (AeronaveTbl INNER JOIN VoosAeronTbl ON AeronaveTbl.MatriculaID = VoosAeronTbl.MatriculaID) ON MissaoTbl.MissaoID = VoosAeronTbl.MissaoID
WHERE (((VoosAeronTbl.Data) Between [forms]![ContAnFrm]![DataInicio] And [forms]![ContAnFrm]![DataFim]))
GROUP BY AeronaveTbl.Registo
PIVOT MissaoTbl.MISSAO;
...I get the follow error
microsoft jet database motor does not recognize [forms]![ContAnFrm]![DataInicio] as a field name or valid expression
Help
thanks
I have set up a database that stores actions (i.e jobs). In the table; two of the fields are...'required completion date' and 'actual completion date'. I wish to lookup, by using a query, all of the open actions (those which havent yet been complete (i.e the 'actual completion date' is null)) and then later on all those which are overdue (i.e the 'actual completion date' is null And the 'required completion date' <today....this being the criteria for an overdue action).
However, I have used a form which has a combo box which contains the values open and overdue. When a selection has been made I want a form to display with the results depending on the selection that has been made. I am capable of creating a form based on a query, but am unsure of how to construct the query with the correct criteria based on the option that is selected from the form.
Any help would gratefully be appreciated. Thanks
Hello,
I am trying to simulate the data as it is presented in Excel, but with Access. This might sound stupid, but I have to draw a chart in Excel by Automation from the data I retrieve in Access. So far, I have made a query, which returns the following (see SourceData.jpg (http://www.access-programmers.co.uk/forums/attachment.php?attachmentid=10335&stc=1))
What I have to do next is present the data as follows (see ResultData.jpg (http://www.access-programmers.co.uk/forums/attachment.php?attachmentid=10336&stc=1))
How do I do this in SQL? I have a book at home which I am sure explains this in the form of a Count function, or a crosstab query, but will only be able to check it on Thursday. Could somebody maybe suggest something in the meantime?
What I do know, is that the bottom “Summe” row cannot be done by one query. But the column “Total” must be able to be done with a Count function. (Or am I wrong?) :confused:
Its so hot and humid here and no air-con that I cannot think, so please help!!!
J
Is there something I can put into the criteria of a date box to only use the last 6 months. I dont want have have to do this type of criteria: >12/1/2004. I want it to just use information from the last 6 months no matter what the current month is. If anyone knows what I am trying to say, please help me out! Thanks
Bowes
I have a crosstab query where my column headings are the names of the months based on invoice dates.
what i currently have:
Month: MonthName(Month([AnnualIncome]![InvoiceDate]))
so this spits out April May and June in the column headings.
The problem is that it is sorting it alphabetically, not by the numerical value - so my column headings are coming out as april, june, then may. (I assume once I have july that will come in between april and june.)
Any help would be REALLY appreciated.
Thanks in advance.
Hi, I have a crosstab query, but for any product that has no entries on a certain date a NULL value is put in its place. Is there a way to have a 0 display there? Example of NULL:
DatePRODAPRODBPRODCPRODDPRODE
08/01/200513633
08/02/2005112643
Aug Total:216276
See how there is a NULL for 8/1 under PRODB? I would like that to be a 0
A crosstab query gives the totals for students in particular classes per the Class they belong to, i e
College A – Class1 4, Class2 12, Class3 17
College B - Class1 12, Class2 124, Class3 12
College C - Class1 5, Class2 16, Class3 7
College D - Class1 4, Class2 13, Class3 9
Etc etc
Experts, is there a way to an overall total of the lot, ie
Class 1 30, Class 2 48, Class 3 28, Class 4 etc etc
please?
Hello,
I have a crosstab query with the following column which calculates the number of days an employee took to perform a task. Problem is that it is also counting weekends and holidays.
Field: LogDate
Table: tblWorkLog
Total: Count
Corsstab: Value
Is there anyway to exclude weekends and holidays from that value?
I have a table, tblHolidays, with the field, HolidayDate. Is there a function that I can use like the WeekDay and use that with the HolidayDate field so that I can only get the Number of Work days?
***Addition***
Sorry I would also like to clarify something I have only one date field. What's happening is the user logs in and inputs what he did for the day, and the date is logged.
So the crosstab query sums up those days, but I would like to exclude weekends and holidays.