Crosstab Query
Sep 23, 2005
I am am wondering if it is possible to create a crosstab query that displays alphanumeric values and not numeric (computational) values.
Ex:
Table contains the following details:
Name Branch
Bob 111
Bob 222
Joe 333
Pam 444
I want to use a crosstab so I can view the data as follows:
Name Branch1 Branch2
Bob 111 222
Joe 333
Pam 444
Is this possible? I've been playing around with it and it doesnt look doable. Perhaps there is a better way of getting the data into this format? Any suggestions would be greatly appreciated!
Super Thanx.
O.
View Replies
ADVERTISEMENT
Sep 21, 2007
Hi all, I am utterly unsure if what I want to do is even possible:
I have two crosstab queries, qryRewCOCredit and qryWrapCOCredit which show the changeover (CO) times for the specified machine when they are NOT zero. (all zero entries don't show up).
There are many cases when there is a CO for the Rewinder on a specific day, but not for the Wrapper, and vice versa.
I want to make another crosstab query which performs a calculation. To keep it simple:
If (RewCOCredit>WrapCOCredit) Then
5-RewCOCredit
Else 'WrapCOCredit>RewCOCredit
5-WrapCOCredit
Please help!!!
View 2 Replies
View Related
May 31, 2006
:confused:
I am trying to help someone with a complex problem (so it seems to me) but I will first ask about what should be a simple thing....
First goal: to COUNT the number of times a TYPE of visit is made.
There are several different TYPEs but only interested in tracking 2 of them.
When a crosstab query is created - if one of the 2 parameters are not "met", a blank is returned. I have been reading posts about using NZ and IIf IsNull, etc to get past that - but none of them make any sense to me and the Access help suggestions do not work. Hope someone can make it clear with this information: (can't give more specifics to keep privacy intact)
The SQL was written by Access not by me. :)
Here is an example of the Crosstab SQL (which is using a previous query):
TRANSFORM Count([qryTest2.TYPE]) AS CountOfTYPE
SELECT qryTest2.CID
FROM qryTest2
GROUP BY qryTest2.CID
PIVOT qryTest2.TYPE;
-----------
qryTest2 SQL: (Grouping by to remove dups)
SELECT DISTINCTROW tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
FROM tblM LEFT JOIN tblC ON tblM.[M#] = tblC.[M#]
GROUP BY tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
HAVING (((tblC.TYPE)="Out" Or (tblC.TYPE)="In"))
ORDER BY tblM.CID, tblM.LNAME, tblM.FNAME;
Thanks for you time! :)
View 1 Replies
View Related
Aug 12, 2014
I have a database which among other things records how jobs are received i.e.: Telephone, Email, Mail, Facsimile or Web.For each client I want to identify the percentages of each method of receipt against the total of jobs received and during different time periods.I have created a make table query for all jobs received between variable dates for a client entry of the name of the client and the start and finish dates are required to run the query.
I have a crosstab query set up to count each method of receipt and a final query to work out the percentages using the total from the crosstab query fields divided by the total of all methods.I have a macro set up to replace the table with new data when I want the stats for a different client between new dates, therefore the different methods of receipt may vary for the less active clients i.e.: they may only have telephone and email .
My problem is if I choose a client where we have not received a job by a particular method (say web or facsimile), the last query working out the percentages has fixed names to cover each method but naturally produces an error when it cannot find a corresponding method of receipt. I have experimented with NZ() without success.My question is can I either have preset standard names of the column field in a crosstab query? Alternatively in the query calculating the percentages, can I include code to ignore a non-existent field in the crosstab query.
View 9 Replies
View Related
Aug 17, 2005
Hello All,
Your Help Required. I have send you a Database, in which I have used Crosstab query, I just want when I select the report from switchboard, and enter the datefrom / dateto (fields names) than click the preview report. Required report is open.
I have faced following problems
1-When I have selected the report and click the preview button. Report is not opened.
2-I have used cross tab query and link with the switchboard. But when I have run the query this msg is appeared “Microsoft Jet engine Does not recognized these field(name)”
Thanx
ami
View 2 Replies
View Related
Oct 2, 2005
Hi all
I'm trying to create a crosstab query with criteria that refers to a combo box on a form to allow me to filter data before the query is created. However when I refer to the combo box (e.g. = forms!frmSite!CmbSiteName) I am told that access does not recognise this as a 'valid field name or expression'. With a normal select query I dont have the same problem. Is there a way around this?
Cheers
Rhys
View 4 Replies
View Related
Oct 4, 2005
Hi, I have a crosstab query I have set up, calculating the cost of a product per month
it should look like
1 2 3 4
gek22 £55 £66 £77 £88
er44 £99 $100 £101 £102
tt66 £103 £104 £105 £106
but instead it looks like
1 2 3 4
gek22 £55 £88
gek22 £66
gek22 £77
er44 £99
er44 $100 £102
er44 £101
tt66 £103 £106
tt66 £103
tt66 £104 £105
Admittedly this is my first time doing a crosstab query, but I have both my column and rowe headers set to group by, I kinda assumed this would group them in much the same way a pivot table does in excel
Any help on this would be great
Hmm, doesnt want to keep the spacing in it :( hopefully you can get the idea
View 3 Replies
View Related
Jul 6, 2006
I have a report based on a crosstab query and the data changes every time the report is run even though the data is not updated. Can anyone shed some light?
View 1 Replies
View Related
Jan 25, 2007
I have a table with the following info:
Date/shift/name
1-1-07/1/tom
1-1/07/1/Bill
1-1-07/2/frank
1-1-07/2/Ben
1-1-07/3/Scott
1-1-07/3/Terry
1-2-07/1/tom
1-2/07/1/Bill
1-2-07/2/frank
1-2-07/2/Ben
1-2-07/3/Scott
1-2-07/3/Terry
1-3-07/1/tom
1-3/07/1/Bill
1-3-07/2/frank
1-3-07/2/Ben
1-3-07/3/Scott
1-3-07/3/Terry
What I want is the date to be displayed horizontally and the the names vertically with the shift as the intersection:
1-1-07 1-2-07 1-3-07
Tom 1 1 1
Bill 1 1 1
Frank 2 2 2
Ben 2 2 2
Scott 3 3 3
Terry 3 3 3
is this possible with a crosstab query or do I have to go about doing it some other way? If a crosstab query is possible how do you go about doing it?
Any help would be greatly appreciated.
View 3 Replies
View Related
May 30, 2007
I need help with a crosstab query ( :eek: ). I would like the column headings to be the last 6 months, the row headings to be billers, and the data in the middle to be both the date that a payment was made (falling within the month headings) and also the amount paid in that payment. Sometimes there might be more than one payment to a biller in a month or there might be no payments to that biller in a month. All of the raw data needed is in one table. I have read about crosstab queries, tried to use the wizard, and looked at examples but I can't get it to work:confused: . Could someone show me how this should be written? :)
Something like this is what I need:
_______________Jan______________Feb_____________Ma r__________Apr
Power............1/3....200..............2/4...250...........3/7....225........4/5.....250
Lease............1/15...1200..........2/15...1200..........3/16..1200.......4/20...1200
Insurance.......1/16...175.............2/20...175...................0.....................0
.............................................. 2/26...350
Water/Gas.......1/6...150.............2/10...175...........3/3...150.........4/10...175
Thanks a lot...
View 10 Replies
View Related
Jun 29, 2007
Hi,
I need a query which displays data as a crosstab query would but gives me the capability to edit data in the query. Basicaly, I have a Resource column, a Month column, and an Allocation column (among others). I need the months to appear in columns and the allocations to be summed by month. (Months are never repeated though, so it's not really a sum...) Can anyone help me out on this?
Thanks!
View 1 Replies
View Related
Aug 16, 2007
My crosstab query doesn't take the textbox value from the form. It says it doesnt recognize [forms]![frmMain]![txtEndDate] as a valid field name or expression. How can I solve this?
TRANSFORM Sum(tblDowntimeHrs.downtimeHrs) AS downtimeHrsOfSum
SELECT tblEquipmentType.Equipment_Type
FROM tblEquipmentType INNER JOIN (tblCategory INNER JOIN tblDowntimeHrs ON tblCategory.category = tblDowntimeHrs.category) ON tblEquipmentType.type = tblDowntimeHrs.type
WHERE (((tblDowntimeHrs.date)>=[Forms]![frmMain]![txtStartDate] And (tblDowntimeHrs.date)<=[forms]![frmMain]![txtEndDate]))
GROUP BY tblEquipmentType.Equipment_Type
PIVOT tblCategory.category_description;
in my select query with the same table, it works fine:
SELECT tblEquipmentType.Equipment_Type, tblCategory.category_description, Sum(tblDowntimeHrs.downtimeHrs) AS downtimeHrsOfSum
FROM tblEquipmentType INNER JOIN (tblCategory INNER JOIN tblDowntimeHrs ON tblCategory.category = tblDowntimeHrs.category) ON tblEquipmentType.type = tblDowntimeHrs.type
WHERE (((tblDowntimeHrs.date)>=[Forms]![frmMain]![txtStartDate] And (tblDowntimeHrs.date)<=[forms]![frmMain]![txtEndDate]))
GROUP BY tblEquipmentType.Equipment_Type, tblCategory.category_description;
thanks.
View 1 Replies
View Related
Nov 21, 2007
i have this crosstab query that works fine
TRANSFORM Sum(VoosAeronTbl.ATE) AS SomaDeATE
SELECT AeronaveTbl.Registo
FROM MissaoTbl INNER JOIN (AeronaveTbl INNER JOIN VoosAeronTbl ON AeronaveTbl.MatriculaID = VoosAeronTbl.MatriculaID) ON MissaoTbl.MissaoID = VoosAeronTbl.MissaoID
GROUP BY AeronaveTbl.Registo
PIVOT MissaoTbl.MISSAO;
when I try to select between dates set on a form field like this...
TRANSFORM Sum(VoosAeronTbl.ATE) AS SomaDeATE
SELECT AeronaveTbl.Registo
FROM MissaoTbl INNER JOIN (AeronaveTbl INNER JOIN VoosAeronTbl ON AeronaveTbl.MatriculaID = VoosAeronTbl.MatriculaID) ON MissaoTbl.MissaoID = VoosAeronTbl.MissaoID
WHERE (((VoosAeronTbl.Data) Between [forms]![ContAnFrm]![DataInicio] And [forms]![ContAnFrm]![DataFim]))
GROUP BY AeronaveTbl.Registo
PIVOT MissaoTbl.MISSAO;
...I get the follow error
microsoft jet database motor does not recognize [forms]![ContAnFrm]![DataInicio] as a field name or valid expression
Help
thanks
View 3 Replies
View Related
Jun 28, 2005
Hello,
I am trying to simulate the data as it is presented in Excel, but with Access. This might sound stupid, but I have to draw a chart in Excel by Automation from the data I retrieve in Access. So far, I have made a query, which returns the following (see SourceData.jpg (http://www.access-programmers.co.uk/forums/attachment.php?attachmentid=10335&stc=1))
What I have to do next is present the data as follows (see ResultData.jpg (http://www.access-programmers.co.uk/forums/attachment.php?attachmentid=10336&stc=1))
How do I do this in SQL? I have a book at home which I am sure explains this in the form of a Count function, or a crosstab query, but will only be able to check it on Thursday. Could somebody maybe suggest something in the meantime?
What I do know, is that the bottom “Summe” row cannot be done by one query. But the column “Total” must be able to be done with a Count function. (Or am I wrong?) :confused:
Its so hot and humid here and no air-con that I cannot think, so please help!!!
J
View 4 Replies
View Related
Jun 28, 2005
Is there something I can put into the criteria of a date box to only use the last 6 months. I dont want have have to do this type of criteria: >12/1/2004. I want it to just use information from the last 6 months no matter what the current month is. If anyone knows what I am trying to say, please help me out! Thanks
Bowes
View 4 Replies
View Related
Jul 12, 2005
I have a crosstab query where my column headings are the names of the months based on invoice dates.
what i currently have:
Month: MonthName(Month([AnnualIncome]![InvoiceDate]))
so this spits out April May and June in the column headings.
The problem is that it is sorting it alphabetically, not by the numerical value - so my column headings are coming out as april, june, then may. (I assume once I have july that will come in between april and june.)
Any help would be REALLY appreciated.
Thanks in advance.
View 4 Replies
View Related
Aug 3, 2005
Hi, I have a crosstab query, but for any product that has no entries on a certain date a NULL value is put in its place. Is there a way to have a 0 display there? Example of NULL:
DatePRODAPRODBPRODCPRODDPRODE
08/01/200513633
08/02/2005112643
Aug Total:216276
See how there is a NULL for 8/1 under PRODB? I would like that to be a 0
View 4 Replies
View Related
Aug 26, 2005
A crosstab query gives the totals for students in particular classes per the Class they belong to, i e
College A – Class1 4, Class2 12, Class3 17
College B - Class1 12, Class2 124, Class3 12
College C - Class1 5, Class2 16, Class3 7
College D - Class1 4, Class2 13, Class3 9
Etc etc
Experts, is there a way to an overall total of the lot, ie
Class 1 30, Class 2 48, Class 3 28, Class 4 etc etc
please?
View 2 Replies
View Related
Oct 10, 2005
Hello,
I have a crosstab query with the following column which calculates the number of days an employee took to perform a task. Problem is that it is also counting weekends and holidays.
Field: LogDate
Table: tblWorkLog
Total: Count
Corsstab: Value
Is there anyway to exclude weekends and holidays from that value?
I have a table, tblHolidays, with the field, HolidayDate. Is there a function that I can use like the WeekDay and use that with the HolidayDate field so that I can only get the Number of Work days?
***Addition***
Sorry I would also like to clarify something I have only one date field. What's happening is the user logs in and inputs what he did for the day, and the date is logged.
So the crosstab query sums up those days, but I would like to exclude weekends and holidays.
View 5 Replies
View Related
Oct 11, 2005
I have a table with 20,000 names in column 1.
Columns 2-8 are Yes/No questions.
I would like to set up a query to see how many people answered Yes for any combination of questions. I think a crosstab is needed, but I just can't for the life of me think how to do it.
Any ideas?
View 3 Replies
View Related
Oct 21, 2005
I am trying to create a crosstab query that counts how many records have events scheduled to start between each hour. The times are random during the hour and when I tried to create a crosstab I got a header row for the actual times.
I tried to do this manually, see attached JPGs. This does not work and returns all times for the date as you will see. In the JPG that time period should show 41 for Oct 19. Now if I do a select query and put the Between statement in the criteria no problem it shows only the 41 records however I know it shouldn't take 24 queries to get this done.
This is my goal
Oct 19, 2005
T1_TO: 7:00AM - 7:59AM = 4
T2_TO: 8:00AM - 8:59AM = 2
T3_TO: 9:00AM - 9:59AM = 0
and so on around the clock.
I thought this would be easy and I still think it is, I am just missing something.
RichB
View 4 Replies
View Related
Oct 25, 2005
In my Accounts table I have a field called Status. This field is populated by single letters. A=Active, P=Paid and so on. I have a status (R) that is occasionally used. It won't show up in my crosstab queries since we currently do not have an account that is in R status. How can I get my crosstab to show the R status as having 0?
View 3 Replies
View Related
Nov 12, 2005
I’m struggling with the following cross tab query:
IDDateProduct Net Weight
11/11/05 Prod A1000
21/11/05 Prod A3000
32/11/05 Prod B1500
42/11/05 Prod C1200
Product Type is grouped according to the individual types for that particular date and quantities summed.
I’ve achieved this but I’d also like to add the weight of Prod A and Prod C together for each day, grouping them together with a sum of their weights.
I suspect that a IIf or SQL statement may be the way forward but I’m unable to make any headway.
View 2 Replies
View Related
Dec 13, 2005
Hi,
I am trying to query on a table, predominantly made up of check boxes, so that I can get a summary which essentially shows the number of 'checks' in each field within a given date range. I have attached a Word file, which should explain exactly what I would like to achieve.
If anyone can help me I would be extremely grateful.
Many thanks and best wishes
Russell
View 5 Replies
View Related
Dec 24, 2005
I've been struggling with a problem and I hope one of you can please help.
I created a crosstab query that displays group names on the vertical axis and dates on the horizontal axis. I use a Count for the values. I use a pop-up dialog to get parameters for the dates (between... and), which are organized as Quarters. The query works fine and I can insert it into a report, which also works fine... with one problem. The dates only work when the date parameters request a year (4 quarters), and only work when each quarter has at least one entry. (Only work = I get an error message when one or both of these conditions are violated.)
Sometimes, I want to look at less than a full year, but when I use parameters for three or fewer quarters, I get an error. Same thing if I request a quarter that doesn't have any data. I assume the solution is to convert Nulls to Zeros and have wrestled with both Nz function and IIf, but have not been able to convert the values. I get the correct values in the quary's dataset if they are numbers, and blanks if no data, but no zeros anywhere. I also don't know how to make my report flexible or dynamic, so I can limit the number of quarters if I only want to look at a specific quarter or quarters (less than four).
Any ideas? Thank you so much for your time, and, Happy Holidays!
Stu
View 8 Replies
View Related
Feb 16, 2006
This is my first time posting here and I hope you guys can help me.
I have a problem with using a crosstab query.
My original table looks something like this
VALUES
Oil_ID (PK)
Property_ID (PK)
Col_Heading (PK)
Row_Heading (PK)
Values
Oil Name
Property Name
I made a crosstab query with the columns being 'Col_Heading' and the rows being 'Row_Heading' and the values being 'Values'.
I made a form that has two combo boxes (Oil Name, Property Name). It also has a subform in which I want to display the crosstab query.
Now here comes the problem. Those two combo boxes need to be able to filter the data, but I am not able to put the code:
IIf(IsNull([Forms]![Values Form]![combo52]),[VALUES].[Oil Name],[Forms]![Values Form]![combo52])
IIf(IsNull([Forms]![Values Form]![combo66]),[VALUES].[Property Name],[Forms]![Values Form]![combo66])
in the Criteria because an error pops up saying: "The Microsoft Jet database engine does not recognize 'above_code' as a valid field name or expression.
So I created a select query, call it QueryA', that would let me filter the data. The I created a crosstab query based on QueryA, but the same error message occurs.
I am stuck. If you could help me, I would greatly appreciate it.
Thanks
View 1 Replies
View Related
