I am running Access 2003
I am get the following Error "Run Time Error 3001 Invalid Argument"
What I am trying to do is append data to a table based off a crosstab query and then open a form which its record source is the table I just append. The code as follows.
Dim qr As QueryDef
Dim dtDate As Date
Dim intPayment As Integer
'Delete old data from temp table
DoCmd.OpenQuery ("qryDeleteTempDrillDown1-Detail")
'append data
Set qr = CurrentDb.QueryDefs("qryDrillDown1-Detail")
qr.Parameters("PaymentCycle") = intPayment
qr.Parameters("DateBalancing") = dtDate
qr.Execute ' THIS IS WHERE I AM GETTING MY ERROR:mad:
DoCmd.OpenForm ("frmDrillDown1-Detail")
The append query is made up of a crosstab query which is made up of a union query, which is made up of 14 separate select queries. 7 of the select queries have the same parameter and the parameter is defined in each of the query. 2 of the seven queries have a second parameter that is the same, which is also defined in their query. I also have the parameters defined in the crosstab query. And I have the parameters defined in my append query.
I don't know why I am getting the error other then my parameters are not being feed through. Any thoughts on this would be greatly appreciated.
I am trying to enter a user-defined parameter in a CrossTab query with little luck. It works fine if I enter the code already defined as in: >= #12/06/2006# but when I enter the code for a user-defined / input such as: >= [Enter date:], or if I try to redirect to a textbox on the active Form such as: >=[Me]![dfrom.Value] I get the error "Invalid field or Expression), although this syntax / code works fine if I do this in a normal query.
So I run cash flow for a business, and we export data from Oracle and insert it into an access database. I have to run about 25 queries, entering in the same parameters for each. We number each week of the year. So for say the first week in January, I would run the first query and it asks: Beginning Week, I enter in 1, then another paramter value asks me the ending week. I have to enter in these parameters for each of the 25 or so queries, and it becomes quite irritating. Each query has a number of columns, but I am only interested in obtaining the sum of one of the columns, titled Distribution amount. So I am looking for something that will run each of my specified queries, then spit out the total of the distribution column for each in a table like.
Query 1: Total Distribution Query 2: Total Distribution etc....
Is there anything that would allow me to do this, with entering in the week parameter once, say week 1 start, week 1 end. and it use those same parameters for each query?
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code: TRANSFORM IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT SELECT PT_LEVEL.INF_YEAR, PT_LEVEL.INF_MONTH, PT_LEVEL.UNIT
I have a crosstab queries which uses the date query parameters. However, when I go to my Export command (code is below), it ask me to enter the date parameters (start date and end date) twice. What do I have to do so that the system will ask me to enter once only?
Code: On Error GoTo Err_cmdTest_Click 'Must 1st set a Reference to the Microsoft Office XX.X Object Library Dim dlgOpen As FileDialog Dim strExportPath As String Const conOBJECT_TO_EXPORT As String = "qryEXPORT"
I have a report that has two sub reports. The sub reports are based on two different queries that have a parameter in each. When I run the report it prompts me to enter the two parameters for each record (there could be 30 or more records), how do I get the parameters to only ask me once and pull all records? My parameter is >[Continued ED Starting After XX/XX/XXXX] and the other parameter is >[Credits Starting After Date: XX/XX/XXXX], so I would like to just enter this information once and return all records with that criteria and not have to enter the information 30 or more times to get all records.
I have a list of 20 hospital patients that I am trying to use to try and establish a list of supplies or services billed on Day of Surgery, Post Op Day 1, Post Op Day 2, Post Op day Three and Post Op Day 4. My problem is when I ran Crosstab Summaries on their accounts the column headings were the actual dates of services. The dates range from January 2014 to July 2014. Is there a way I can change the dates object to the text objects listed above and then merge the accounts so the items and quantities are tabulated. If I can't do this with Access I'll have to tabulate them manually by either creating a new table and data form or by setting up an Excel Spreadsheet.
Current Crosstab Item # Description Total Qty Jan 1 Jan 2 Jan 3 Jan 4 Jan 5 201 Gauze 3 2 1 203 Misc 1 1
What I want is:
Item # Description Total Qty DOS POD1 POD2 POD 3 POD 4 201 Gauze 3 2 1 203 Misc 1 1
Keep in mind that there are 20 accounts with varying dates that have to combined into one table or query.
I am building a database which tracks tasks assigned to employees. I want to have one of my forms displaying a view which shows at a glance which tasks are assigned to whom at what times of the day, with a click opening a task for editing. My current attempt is to create a crosstab query with the employees as the column headings ("dynamic crosstab" query) and a table of time values for the hours of the day providing the row headings, with the task as the value.
I then created a form based on the query with Datasheet view as the default view (apparently necessary to set properties/event handlers to query values. I got the idea from the Northwind sample database) However, the form fields do not update to reflect changes to the employee list and therefore the onClick handlers are not applied to newly added employees. What to do, besides for programmatically setting the event handlers?
What I am trying to do is create 3 (or more) parameters for a query from a single table. Lets use this for example:
Table Name= "tblExample" Field Name "A" with Perameter "1" Field Name "B" with Perameter "2" Field Name "C" with Perameter "3" (All from Table= "tblExample")
My intentions are that when the query is run, the user is asked to include 3 subjects (1 subject per perameter; 3 perameters total that pop up). But I am having trouble making it so that if a random person using this query doesn't know or can't remember 1 or 2 of the subjects they are looking for, the query will just (in a sense) ignore the two blank parameters the user has left alone, and just clicked the "ok" button without entering anything, and use the 1 parameter that it was given a subject for, to filter/query out a result.
If you beleive you will have trouble explaining this to me, I'll use this as an example:
Table Name: "tblExample" Field Name: "A" with Parameter "1" Field Name: "B" with Parameter "2" Field Name: "C" with Parameter "3" (All from Table: "tblExample")
The user uses the query and is asked by the first parameter for input. The user isn't sure, and clicks ok without entering anything, and parameter 2 pops up. The user then enters a subject of which he/she knows to look for and clicks "ok". Then the final parameter asks the user for input, and the user again doesn't know, or can't remember so he/she just presses the "ok" button. What would be the coding for this kind of parameter that if nothing is entered, the parameter is ignored?
In desperate need of assistance. Thanks in advnace
I have a query which has a parameter called [Enter Date as DD/MM/YYYY]. This filters out records from my table which match those entered by the user. However, when the query is run, Access is asking the user to enter the criteria twice. The first time it is labelled Expr1, the second time it is Enter Date as DD/MM/YYYY. There is obviously something wrong in my query, can anybody point me in the right direction here?
I have a query that pulls information from two tables. Some of the fields that are being queried share the same name in the tables, [Reimbursed_Amount] and [Cancel_Fee] specifically. In Design View I have specified that I only want the query to pull these fields from the Event Information table. An error occurs when I try to run it, saying that I need to define which table the field is from in the SQL code.
But then after I added clarification in the SQL, when I run the query it now prompts for a parameter for each of these fields. Why is this happening? I leave it blank, so a parameter has no impact on the query. How can I stop this?
Here's the SQL, after I added the table clarification:
Code: SELECT (Sum(nz([Program_Cost])+nz([Millage_Fee])+nz([Auditorium_Cost])+nz([Cancel_Fee].[Event Information])-nz([Reimbursed_Amount].[Event Information]))) AS Total_Cost, [Shared Billing Information].Paid, [Shared Billing Information].Shared_Billing_ID, [Event Information].Shared_Billing_ID FROM [Shared Billing Information] RIGHT JOIN [Event Information] ON [Shared Billing Information].Shared_Billing_ID = [Event Information].Shared_Billing_ID
I am trying to create a form where a user will enter in a value into a text field. Afterwards, when the user clicks "Enter", a query will run and will LOOK FOR THE VALUE THAT WAS ENTERED INTO THE TEXT FIELD. i.e. User enters their address into the field and clicks the enter button. Afterwards, a query will run like select * from customers where address = @address <== the value the user entered into the text field. This is where the mystery lies. How do you pass values?????
have a query that works fine when I have to select one parameter, however I don't know how to select multi parameters...In this query I would like to able to select as well as the specific 'POSTITION' value Also 'BASE' and all those parameters that have a check box empty or full.
Code: SELECT tblCrewMember.StaffNumber, tblCrewMember.Surname, tblCrewMember.Name, tblCrewMember.Position, tblCrewMember.Base, tblCrewMember.Nationality, tblCrewMember.StartingDate, tblCrewMember.Resined, tblCrewMember.ResinedDate, tblCrewMember.Birthday, tblCrewMember.IDCrewMember, [GroupBy] AS Expr1 FROM tblCrewMember WHERE ((([GroupBy])=[Position])) ORDER BY tblCrewMember.StaffNumber;
UMMonth1: Choose([Enter Qtr],[OperationsAuditData]![1],[OperationsAuditData]![4],[OperationsAuditData]![7],[OperationsAuditData]![10]).But I keep getting an error message "You tried to execute a query that does not include
Do access VBA implements parameters passed to query strings in all following parameters?I've been working in ASP.NET/Razor C# and this would be an example of how it would be done:
im working in MS Access 2007.what im trying to do is have a query run specific parameters if a check box is selected. So if the check box is selected than the query filters the "Tranche" column so that the only records that shown are records that have the "Tranche" coloumn = 1.
I know this can be done either in vba code or in the criteria section of a query but i dont know that appropriete language for either.
In vba code i was able to get this far. But..... i dont know how to call the criteria line from a query?
This is my very simple unfinished code.
My query is called [Tranch Query] and the column i want to filter with is call [Tranche]. The check box is called [Check0].
Private Sub Check0_AfterUpdate() If Check0 = True Then 'How do i set the query criteria????? End Sub
I have a sql to run and I have to use many values as parameters (over 1000), which is why I am trying to use a SQL inside a IN condition.
I am testing the sql with only 1 value for now. The parameter I am using will be 2208287. This returns in a matter of seconds.
Code: Select a.po_id, a.sku12, sum(a.unit) AS Units, sum(a.weighted) AS Weighted_Units, ((sum(a.weighted))/ (sum(a.unit))) AS weighted_turntime From( SELECT ds.src_evnt_txn_tmst AS alloc_ts, bc.src_evnt_txn_tmst AS ship_ts, ds.Po_id, Left(bc.sku16,12) AS SKU12, ds.distro_id AS alloc_distro, bc.distro_id AS Ship_distro, Sum(bc.unit_qty) AS Unit,
[Code] .....
but it does not work when I add a sql inside the IN condition. It actually runs forever and eventually I have to break it to stop. why this is not working with a sql inside a IN condition.
Also note:
table ROSS_REPORT_DISTRO_DTLS_SUM is a linked table table BOL_CONTNR_SKU16_RTED is a linked table table CopyOfdata is a local table (This is where I will put all of my values to act as parameters)
Code:
Select a.po_id, a.sku12, sum(a.unit) AS Units, sum(a.weighted) AS Weighted_Units, ((sum(a.weighted))/ (sum(a.unit))) AS weighted_turntime From( SELECT ds.src_evnt_txn_tmst AS alloc_ts, bc.src_evnt_txn_tmst AS ship_ts, ds.Po_id, Left(bc.sku16,12) AS SKU12, ds.distro_id AS alloc_distro, bc.distro_id
I have a crosstab query where I can compile the totals per day that I want. What I need to do is then group these days into weeks by the following Sunday for a week ending total. How can I link each day for its corresponding week ending date. I attatched an image if it helps.
I'm pretty new to Access, so if I'm doing this the hard way, that's why.
I work in a quality control position, and I'm trying to set up a single Access database for the QC staff to use instead of everyone having their own seperate Excel workbooks.
The issue I'm running into at the moment is on a report. Each record is graded on four seperate types of criteria, Error Type 1, Error Type 2, Error Type 3 and Error Type 4, all of which need to be reported on seperately. So I have at least four queries set up, all with the same parameters (right now, just review date.) I'm trying to pull through all four queries on the same report, and so far I've had success having the report ask for the parameters only once and then applying it to all four queries. However, I'm running into a problem where Access is now forcing the filters of each individual query on to each of the other three queries, so it's only pulling through records for all four queries that match the criteria of all four. Any record which only matches the criteria of one, two or three of the queries is being left off the report.
Sorry if this sounds confusing. Anyone have an idea as to what I'm doing wrong?
I have a fact table which contains a list of products at many different Retail Prices. I want to band these products into groups based on Retail Price Bands.
I have created a second table with the fields Retail Price Band, Minimum Retail Price, Maximum Retail Price. This defines the banding structure.
I would like to join Retail Price with Retail Price Band based on the parameters in the second table but don't know where to begin.
I made a query that requires to enter two parameters (both are Number data type). I need the 2 parameters to be a criteria in the same row (AND). When I run the query it gives me zero result (and the data is already exists in the table). What is the mistake?
I've got a table of associate directors "t_ADnames" and want to build separate tables for each AD name that pulls a pass through query from our data warehouse. I'm thinking it's got to be done with a macro somehow? So it would run pass_query where AD name = "John" and insert into t_john, then it would check the next name in t_ADnames and run the same query for say "Mark" and insert all his data into t_mark and so on until the list (of about 12 people) has been completed.
