DB Connection Times Out... Asp Page Wont Display
Jan 12, 2005
The past few days I have noticed the Access database that I am using for development on a new site has been having problems. I am unable to locate what is going on but it seems as though the ASP page can't access the database, or if it its super slow. It just sits there and times out.
Anyone have any ideas on what might cause this? I have a support ticket into the server admin to have him check it out... just wondering what you all think?
View Replies
ADVERTISEMENT
Jun 13, 2015
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
View 1 Replies
View Related
Aug 18, 2006
I need to print data on a pre-printed letter-sized piece of paper that will be cut horizontally into three identical 8.5" x 3.667" forms.
For the life of me, I cannot figure out how to format a report to get the data in the right spots. I've tried messing with the margins, height of the detail area, columns...everything I can think of. It seems I can get the data to print in the right spot on the top form but neither of the other forms and/or on the top two but not on the bottom at all.
There *must* be a way to do this.
View 3 Replies
View Related
Sep 16, 2013
So i have a union query pulling together about 3,000 records from other queries.
I arranged all the counts and data I need to fit onto one page, but the report is copying that page (minus the header) for each record in the union query. I'd much prefer a one page report rather than a 3,000 page report.
Why does it do that? All I want is a one page report, how can I make that happen?
View 3 Replies
View Related
Dec 9, 2005
Can anyone help?!? I need desperately to display a web page in a form but when i insert the browser i cant find where to put the URL in order to display the webpage..........!!?!?! HELP!!?!:confused:
Ben
View 1 Replies
View Related
Sep 20, 2011
I was able to get the Query set how it's supposed to be.I now have the SQL for that Query and I would like to use that to display the information on a web page. I need the information to be constant on the page...if the database is updated, the information that reflects on the page needs to update.
The database resides on my standalone server, and is opened from that location. (I'm using XAMPP to create a standalone server in a sandbox environment...
View 3 Replies
View Related
Mar 19, 2015
There are two pages in a word document. All the pages have same headers as attached in word document "Capita.doc". I want to display that header on just first page and on second one page, I want to display watermark stored in "J:PAP107.jpg". The following code displays same watermark on all the pages i.e "J:PAP107.jpg" but I want to keep the header as in the attached word document on first page only and display watermark stored in "J:PAP107.jpg" on second page.
Code:
Private Sub CmdPrint_Click()
Call WordSetupQA("C:CAPITA.dot", "J:PAP107.jpg", Format(DateSerial(ComboBox4, ComboBox3, ComboBox2), "mm/dd/yyyy"), pno)
End Sub
Code:
Sub WordSetupQA(fnTemplate As String, fnBackGroundPic As String, b As Date, a As String)
On Error Resume Next
'MsgBox txtbox
Application.DisplayAlerts = False
Dim strworkbookname As String
strworkbookname = "C:System1.mdb"
Set WordApp = GetObject(, "Word.Application")
[code]....
View 1 Replies
View Related
Nov 8, 2013
I'm using a web control to display a page. I want to have a code that can copy to a field in that same form, the html source of that page that is displayed in the web control. How I can do that?
View 13 Replies
View Related
Sep 6, 2013
I am working on a change control database where the users can enter a new version for the software they just released and send out a notification to the appropriate persons. I have a form where the user can select a combobox to pick the software version, which is bound to my "Releases" table. From the software version I use a DLookup in VBA to change the value of a another unbound text box using:
Me.Release_Type = DLookup("[Release_Type_ID_FK]", "Releases", "Release_ID_PK = " & Me.Release_ID)
This all works fine when I'm entering data in the form, but if I want to print the form, the unbound text box on each page is only calculated from the first record. The same thing happens if I build a report with the same fields and code.
For example: In print preview the text box on page 1 should say "Cat" based on the current record and the text box on page 2 should say "Dog". However, they both say "Cat"
How do I get the text box to display the new value on each page?
View 4 Replies
View Related
Sep 26, 2005
Dear Guys,
How to Establish the connection between Ms-Access2000 & Oracle using DAO Connection through Code?.
I created one table in Oracle and I created User-DSN in ODBC.
I linked that oracle table into Ms-Access MDB using Link table option in ms-Access.
Now, Whenever I open that mdb, we need to establish the ODBC connectivity automatically through code (I mean, we need to refresh automatically).
I need to hardcode all the information in the Ms-Access code.
My User DSN Name: abcd
Oracle Database Name: abcd
Schema Name(User Name): abcd
password: abcd
View 1 Replies
View Related
Jan 9, 2005
Right Ok i hope i can get some help cause im absolutely stumped..
i cant get my login page to work since moving it from my PWS(iis on xp) DSN connection
to a 24/7 server on the net with DSNless connection
here is the code for the include file "conntopwd.asp"
http://www.pritchardwebdesign.pwp.blueyonder.co.uk/conntopwd.txt
the username and path has been changed slightly for security purposes,
and the code for the login page which attempts to access the database is here
http://www.pritchardwebdesign.pwp.blueyonder.co.uk/login.txt
the connection has been tested by one of the tech support guys at brinkster and he told me it was ok,
the problem was the way that the data is called from the data base is wrong ..
The tech support guy said that it was this line that was causing the problem..
MM_rsUser.ActiveConnection = MM_conntopwd_STRING
Any help would be much appreciated as im stuck for now..
View 2 Replies
View Related
Nov 12, 2013
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies
View Related
Nov 22, 2004
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
View 1 Replies
View Related
Dec 30, 2007
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
View 1 Replies
View Related
Oct 21, 2013
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies
View Related
Apr 20, 2014
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies
View Related
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
View 1 Replies
View Related
Jul 9, 2005
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
View 1 Replies
View Related
Sep 3, 2006
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
View 6 Replies
View Related
May 17, 2013
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
View 3 Replies
View Related
May 23, 2013
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
View 2 Replies
View Related
Oct 25, 2005
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies
View Related
Mar 11, 2014
I am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
View 1 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Sep 29, 2006
Is it possible to connect access data project with two or more sql databases?
Thank you
View 2 Replies
View Related
Feb 10, 2005
I have a data base that I use ADO primarly to connect to the backend access database. Each time I query a table I create a new connection and then kill the connection after I'm done with it. Should I be creating a global connection and leave open the entire time the program is open, or should I be killing the connection each time?
View 1 Replies
View Related