DCOUNT Function With IN Statement

Aug 12, 2011

I have a report where I use numerous DCOUNT functions, and it works fine. But now I need another report which has multiple conditions, and I can't seem to find examples anywhere to get my syntax right. For this example, the field 1 ENJOY in table CONGSITEALL needs to pull out the number of entries for the answer Yes, Definitely, and Most of the Time. I have tried putting the quotes, etc into diffeent places but I just can't seem to find the right combination.

=DCount("[1 ENJOY]","CONGSITEALL","[1 ENJOY] IN ('''Yes, Definitely','Most Of The Time'")

View Replies


ADVERTISEMENT

Dcount Function

Oct 20, 2005

Hello,
I am using a Dcount function in an unbound textbox to count the number of records in a query.

I have noticed that it takes some time to process the calculation. Often I need to click in the text box to see the result.

Is there any other way I can do this, perhaps via code? This is what I am writing:

=DCount("[BLN]","SAAdata")

BLN is the field
SAADATA is the query name

Thanks.

View 5 Replies View Related

DCount Or Count Function

Mar 17, 2008

HELP PLEASE!!! There are two fields in my form that need the following relationship:

1. When I enter 1000 in my "spec no" field in my form, I need my "Number Field" to enter a "1"
2. When I enter 1000 in my "spec no" field in the next record, I need the "Number Field" for this record to enter "2" but "1" to remain on the first record.
3. If I enter 1001 in my "spec no" field in the next record, I need the "Number Field" to enter "1"
4. Continue this logic for all records without modifying the previous "Number Field" record.

I was told there was a way to accomplish this using DCount or Count function. Maybe there's an easier way??? Any help is greatly appreciated!! TX!

View 1 Replies View Related

Troubleshooting DCount Function

Jun 20, 2005

Hello,
I would like to insert a DCount function in an unbound textbox in a form to count all records in a query. My current code in the textbox is: '=DCount("*","Query1")'. The Query 'Query1' depends on two parameters, which has to be entered before opening the query. The result is '#Error', if 'Query1' is open or not.
Thanks for your help.

View 5 Replies View Related

Modules & VBA :: DCount Function Counting 0s As 1s

Sep 24, 2013

In my database when an item is currently being loaned the item's loaned field will have a 1 to indicate this. When the item is returned the value is 0. Only so many items are available and when I use the DCount function it is counting the 0s as 1s.

View 1 Replies View Related

Forms :: Using DCount Function On Subform

May 31, 2015

My mainform is "CourseDays" and subform is "CoursesSubForm". The "CoursesSubForm" data source is a table "Courses" which contains a field "Subject".

I add a calculated field on the mainform to count the number of records in the subform. This is my code:

=DCount(”[Subject]”,”[CoursesSubForm]”)

An error message results.

View 5 Replies View Related

Forms :: DCount Function - Getting Count Of 3 Dates When There Is Only One

Nov 9, 2013

DCount function.

Code:
Me.ImprovementNotice5DayCount = DCount("[txtReferralReason]", "qryRTOFileReferralPopupCount", "[ComplianceTargetDate]-[DateNow]<=5")

I am not sure where I have gone wrong.

What I would like Dcount to count are those dates in the ComplianceTargetDate form control that are <=5 to the DateNow form control.

I get a count of 3 when there is only one. I may have the syntax of the Dcount wrong.

View 4 Replies View Related

Forms :: DCount Function With Combobox Criteria

Oct 7, 2014

I am working with MS Access 2003. I have a form (frmCalendar) with a textbox (tbDay) and a combobox (cmbLineName)

I want to count the number of records based on the criteria from cmbLineName, and show the result in tbDate. Inside the Control Source of tbDate I put in the following:

=DCount("[EncounterID]","tblEncounters","[LineName] = ' " & "Forms![frmCalendar]![cmbLineName] = " ' ")

The problem is that the result in tbDate is always 0; regardless of what is chosen in cmbLineName. I know that the record count should not be 0 for all criteria.

View 4 Replies View Related

Modules & VBA :: Fix Type Mismatch Error With Dcount Function?

Dec 3, 2013

I ahve declared custCount as an integer and id as a string that comes from the user form (id = me.CustID) and trying to count the number of matching records in the recordset (rst) using the following:

custCount = DCount("[customerId]", rst, "[customerId] like '" & id & "'")

I'm getting a type mismatch error on the DCount statement?

View 3 Replies View Related

Forms :: DCount Function In Subform - Total Number Of Records

Jun 14, 2015

I am trying to count the number of records in a subform where the text box (txtFinal) = RPR-RPR & RTN. The subform is called PartNumbers. The table name the subform is bound to is named Completed.

I tried using =DCount("[Part Number]","Completed","[Final] = 'RPR-RPR & RTN'"). That is counting the total number of records in the table, not the total number of records in the subform. How do I get it to count the total number of records in the subform?

View 10 Replies View Related

Queries :: DCount Function Returns Correct Result But Datatype Is Text

Feb 4, 2015

I am using the dcount function as the example I display below. The problem is that it returns the correct result (i.e. 59) but the data type is text (59 is on the left side) . I need this to be number.

=DCount("[OrderID]", "Orders", "[ShipRegion] = 'CA'")

View 3 Replies View Related

CASE Function Or IF Statement

Feb 28, 2006

Hi everyone, please help, i am in depserate need here. Am i right in thinking nested IF functions are limited to 7 variables, i need to choose from 12, so i need to use something different

it seems like a CASE function could do what i want it to, but i really have no clue where to start, shall i enter this into a query criteria box, or on the form itself ina new field box...??

Can you give a few hints as to what the code would look like, i have two fields, obviously. One is 'lesson_type' and one is 'cost' i want the cost to change depending on what is selected in the lesson type box.


LESSON TYPE ----------- COST

Beginner 1hour ----------- 15
Beginner 2hour ----------- 29
Beginner 3hour ----------- 42
Test Retake 1hour -------- 13
Test Retake 2hour -------- 25
Test Retake 3hour ---------36
Disqualified Retake 1hour -- 25
Disqualified Retake 2hour -- 49
Disqualified Retake 3hour -- 72
Advanced 1hour ---------- 10
Advanced 2hour ---------- 19
Advanced 3hour ---------- 27

Is it possible to do that, change the cost correpsonding to what one is entered in lesson_type...??? And where do i put it??? What do i do with it??

Thanks, dragon2309

View 4 Replies View Related

Left Function In IIF Statement

Feb 4, 2008

Hi, hope someone can help me. I want to run a query which acts on data in a table which has been imported from excel, where it was somewhat mangled. Basically, the field shows telephone numbers, but the leading zeros on the phone numbers have mostly been discarded. I want to replace the zeros if they're missing. (Here in the UK phone numbers always start with zero). What I'm trying to use is:
IIf(Left[fieldname],1)="0",[fieldname], "0" &[fieldname]))
But I get errors, I think maybe because of the first comma(?). Can anyone tell me how to achieve this? Any suggestions appreciated.

View 2 Replies View Related

Nested SQL Statement In A Function?

Apr 18, 2008

I have a table of dates that store all the Sundays of a year, as that is what all of our records are based on (how many items an employee sold on the week ending on such and such a date). The table is called WeekEndDates and the column is called WeekEndDate. I want to automate adding a new week, so I have a command button that has the following VB code:

DoCmd.RunSQL ("INSERT INTO WeekEndDates (WeekEndDate) VALUES (DATEADD('D',7, SELECT Max(WeekEndDate) FROM WeekEndDates)")

Any help would be appreciated, I don't know of another way to do this. I'm not sure if this is a SQL question or a VB question, so sorry if this is in the wrong spot.

View 1 Replies View Related

Queries :: IIF Statement - Null Value In Function

Apr 24, 2013

I am trying to using an iif statement to pick up null values, but I don't know what to type in the function. I tried using "is null", but got an invalid message.

What value I should type in to get null value in the function below?

IIf([popi_r2a] is null","",[popi_r2a])

View 1 Replies View Related

Select Query Statement (group By) Function

May 24, 2007

I have several records to search for. I need to select just 1 record for each Tkt_no group using Tkt_id (max no).
Example, I only want to select

Tkt_NoTkt_IDTicket_ProblemTicket_StatusTicket_Finish_Time
114problem 1Done
210problem 2Done00/01/1900 20:00
32problem 3Ongoing00/01/1900 20:00
43problem 4Done00/01/1900 20:00
711problem 5Done21/05/2007 9:15
913problem 6Done22/05/2007 0:00

from below data

Tkt_NoTkt_IDTicket_ProblemTicket_StatusTicket_Finish_Time
14problem 1Ongoing00/01/1900 20:00
114problem 1Done
25problem 2Ongoing00/01/1900 14:30
26problem 2Ongoing00/01/1900 11:30
27problem 2Ongoing00/01/1900 10:15
28problem 2Ongoing00/01/1900 15:00
29problem 2Ongoing00/01/1900 8:00
210problem 2Done00/01/1900 20:00
31problem 3Ongoing00/01/1900 20:00
32problem 3Ongoing00/01/1900 20:00
43problem 4Done00/01/1900 20:00
711problem 5Done21/05/2007 9:15
913problem 6Done22/05/2007 0:00

Any ideas?
Appreciate the feedbacks.

View 4 Replies View Related

Modules & VBA :: Create Disable Alphabetic Keys Function Based On Case Statement

Jul 31, 2015

Details:
I have a Profile form that tracks the expiration date for each client's various certifications. These dates are set up in the Short Date format in the table design of Access.

Problem:
When a user accidentally presses an alphabetic key while updating an expiration date, an Access error message is triggered. This is confusing to my users as these messages are written in Access lingo. I would rather that nothing occurs at all. I wrote a case statement to disable each letter of the alphabet and applied it to the On Key Down Event for each expiration date control on my Profile form to solve this problem, but this must be applied to 28 separate controls. I would rather call a function that disables alphabetic keys for each date control in my form when called.

Questions:
How do I transform my Disable Alphabetic Keys Case Statement into a function that I can call for each expiration date control? I know that when writing a function certain variables have to be declared and/or initialized.

Also, will I need to create a function to re-enable alphabetic keys or is this unnecessary because the disable alpha keys function will only be called for specific controls, not the entire form?

What I Have Tried:
I have tried copying and pasting my Disable Alphabetic Keys Case Statement into a module to attempt to create a function, but it needs work.

Below I have included 2 types of code:
(1) The original On Key Down code applied to each date control on my form
(2) The same code written as an attempt at a function

Original Profile Form Code to Disable Alphabetic Keys in the On Key Down event for each date control

Private Sub txtCert1ExpDate_KeyDown(KeyCode As Integer, Shift As Integer)
Select Case KeyCode
'All message box text is for me to test the code, not for the user to see
Case vbKeyA
MsgBox ("you pressed the A key")

[Code] .....

View 14 Replies View Related

Queries :: Update Statement For A OUTER JOIN Select Statement

Feb 12, 2014

I have the following Select Statement:

SELECTTenant.ID, Tenant.[First Name], Tenant.[Last Name], Tenant.Address, Tenant.City, Tenant.State, Tenant.Zip, Tenant.[Home Phone], Tenant.[Cell Phone], Tenant.[Work Phone], Tenant.[Rented Unit],
Tenant.[Security Deposit], Tenant.[Move In], Tenant.[Move Out], Tenant.TenantID, Tenant.UnitID, Tenant.PropertyID, Tenant.OwnerID, Owner.Company, Owner.ID AS Expr1, Property.[Property Address],

[code]....

Now, I know that something in the UPDATE statement does not match my select statement.What should my Update Statement be, in order to update all the columns in the joined tables?

View 2 Replies View Related

Modules & VBA :: Creating A Function That Counts Records And Use That Function In A Query

Dec 11, 2013

So basically I need making a function that will count the number of records from another table/query based on a field from the current query.

View 2 Replies View Related

Queries :: IIF Statement With And In True Statement

Oct 31, 2014

I have a query with the following criteria in one of the fields:

>=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom())

fom is a function for first of the current month. I need this query to be specific to what month it is when its ran so i want to only have this criteria if the month is > = october. If it isnt October or greater, i want the criteria to reflect this.

>=DateAdd("m",-12,fom()) And <=fom()

Which also works by itself. But when i add it to an iif statement it always produces no results. Below is the iif statement.

Iif(month(date())>=10, >=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom()),>=DateAdd("m",-12,fom()) And <=fom())

I have also added the column name to each expression and it still doesnt produce any results.

View 4 Replies View Related

Creating IIF Statement In Between Statement For Dates?

Apr 28, 2015

I am creating a multi-search form for a student database, where after I enter my search criteria I hit a "Run Query" command button and then it opens a query form with all of my criteria.So far I can search using last name, first name, and middle name. When I try to search with a start date and end date I am have issues.The start date and end date is for the class date. In the query form under the field, class date, for criteria I wrote:

Between IIf([Forms]![Search Form]![Start Date]="",1/1/10,[Forms]![Search Form]![Start Date]) And IIf([Forms]![Search Form]![End Date]="",4/25/15,[Forms]![Search Form]![End Date])

I want it when I write a date in the start date and end date I want it to give me a list of all the students who took the course between those dates. Also, if I leave the dates blank I want it to search all dates. The dates 1/1/10 and 4/25/15 are just the dates I gave because that is far back as my database goes.

View 11 Replies View Related

Forms :: SUM Function Produces Error From Calculated Function

Jan 30, 2014

I have a project at hand and it's been a predecessor of mine and client has asked me to do some work on it and extend functionality - but I have not really delved into Access before and I have had to worked my way through to this final snag :/

The Main Form has one sub form. This sub form allows the user to add multiple order items i.e. qty, stock, description from records within the system - fairly straight forward.At the last column of each row is the sub total of those particular items i.e.

Qty Unit | Item ID | Total
-----------------------
2 | 1234 | 80.00
------------------------
1 | 43526 | 20.00
------------------------
> | |

So the total is a function of =[Qty Unit] * [Unit Price].Then in the Footer of this SubForm is the Sub Total

=SUM([Qty Unit] * [Unit Price])

All fine and well..... However, the additional functionality kicks in.

Lets add the additional customer_id from the Main Form. Each Item bought is dependent on the customer_id i.e. they get special prices depending on who they are.So a New table is made which has the Item ID and SpecialPriceID (of a table to define as a specialPrice) and the Price linked to this Item and Special Price category. So say that there are two groups of users "wholesale" and "nonwholesale" these would be SP_1 and SP_2 and each client is defined either one of these, and each stock item has a Price for each SP_1 and SP_2. Hopefully I've explained myself there.

Back to the SubForm. So now the Total needs to calculated differently with needed the external customer_id from the Main Form.

Code:

Function CalculateSpecialPrice(ItemID As String, CustomerID As String, Unit As Integer)
Dim SPSelect As String
SPSelect = "SELECT Price FROM [Items_SpecialPrices] WHERE"
SPSelect = SPSelect & " ItemID = '" & ItemID
SPSelect = SPSelect & "' AND SpecialPriceID = (SELECT SpecialPriceID FROM Customers WHERE customer_id = " & CustomerID & ") "

[code]....

its the sub total I just keep on getting #Error on. I have even watched (using alerts) that the correct return variable is the same as the individual rows. This is the equation I used for the SubTotal within the footer.

=SUM(CalculateSpecialPrice([Item ID], [Form]![FormName]![CustomerID], [Qty Unit]))
#Error

View 2 Replies View Related

DCount Help

Feb 18, 2006

Was wondering if someone could possibly help me with a DCount problem i'm having.

I have a form with a subform, displaying bookings that customer has made. What i want to be able to do, is when a booking is created for a customer in this subform, after the time period chosen is selected, i want a DCount to run, go to a table of regular bookings, count up how many bookings in it have the date of booking, that same as the date just put into the subform, AND the time period of booking the same as just put into the subform. There can only be 1 result at max due to its setup, and from there it should be fine, but i cannot get it to work. The field names are as follow:

Subform:
Date for Booking
Time Period

tblRegularBookings
Date For
Time Period

If this doesn't make any sense i can try and explain better.

Can anyone help me?

Thanks very much in advance

View 1 Replies View Related

Dcount?

Aug 8, 2006

I have only been using access for about 3 weeks now, and its kicking my butt pretty hard.

Im making a query that does all kinds of math junk in it. I want to be able to find the number of occurrences of x in another column in the table.

For a better example, lets say I have a column named "SP" in the "compiled" table, the values of this column range from 1 to 5, in about 200 entries. So there is another column in the compiled table called "SPX", which has the same value range. So if I am looking at the one entry in the table, I want to take its value in the "SPX" column, and see how many times it shows up in the "SP" column.

I have been trying to get dcount to do this, but I cant seem to get it to work... Must have tried a dozen ways now.

Any help would be awesome, thank you.

View 7 Replies View Related

Dcount

Mar 26, 2007

My main table is called NEWcompiled, I have fields named "faction", "SPeffect", and "Launcher_ID". I am trying to use Dcount in a query to count up how many entries have a value in "faction" and "SPeffect" that are equal, and a value of "yes" in "Launcher_ID".

Currently my code looks like this:
DCount("Faction","NEWcompiled","Faction = '" & [SPEffect] & "'" And "Launcher_ID = yes")

This indeed counts how many entries have equal values for "faction" and "SPeffect", but then it seems to add that to sum of all the entries that have a yes for "Launcher_id".

Any help would be great, thank you for your time.

View 14 Replies View Related

DCount Help

Feb 26, 2008

dear all,

i have the problem when using dcount in my query,anyone can help me?this is the situation.

Table 1:

Num

20080207
20080215
20080218

Table 2:

Begin End

20080206 20080208
20080200 200802116


i want to make the query,and i want to add field "sumactive" using the dcount function refer to Table 1,anyone can help me?i want to count how many record "num" in table 1,between field "begin" and field "end" in table 2

Begin End sumactive

20080206 20080208 1
20080200 20080216 2

thanks

regards

martell

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved