DCount With A Date Range Greater Than X
Mar 3, 2008
Hi,
The query statement below is meant to extract the number of References with a type code of 'M' on the table tblHDRef, then present it under a column named 'Modified':
Modified: DCount("[tblHDRef].[HD Ref]","[tblHDRef]","[tblHDRef].[HD CodeType]='M'")
This works fine - but how can I add further criteria to this query statement to only count references with a HD Date greater than 03/02/2008?
I tried:
Modified: DCount("[tblHDRef].[HD Ref]","[tblHDRef]","[tblHDRef].[HD CodeType]='M' and [tblHDRef].[HD Date]>#03/02/2008#")
but this didn't seem to work at all. Am I missing something?
Cheers in advance.
View Replies
ADVERTISEMENT
Jan 21, 2006
Hi;
Summary: Using DCount in MS Access 97 to output the name of an event
and the total number of occurances per a user input date range.
e.g. the table is called EventData and it is a table of the types of car repair performed, and the fields are:
EventType Date Desciption other Time
======== ==== ============ ====
fix flat 17/01/06 comment.... 101pm
brakes 15/01/06 comment... 504pm
tuneup 02/01/06 comment... 725am
paint fender 03/01/06 comment.. 852am
My issue is to use a subquery for intermediate results and then another query.
I would like the user to enter the start and end dates, and then for output to be:
Output:
EventType Num Occurances
======== ============
fix flat 2
brakes 5
approach 1, use subquery called SummaryQuery:
SELECT EventData.EventType, EventData.Date
FROM EventData
WHERE (((EventData.Date) Between [Type the Start date:] And [Type the End Date:]));
This gives me output of all the events types in the date range and the time.
Then if I query this via:
SELECT SummaryQuery.EventType, DCount("*","SummaryQuery") AS TotalCount
FROM SummaryQuery
GROUP BY SummaryQuery.EventType
HAVING (((EventData.EventType) Between [Type the Start date:] And [Type the End Date:]));
Here I am using DCount to get the num of ocurrances.. but it is not working.
I get the error that "Access cannot find the name "type the start date" "
approach 2, Use only one query:
SELECT EventData.EventType, DCount("*","EventData") AS TotalCount
FROM EventData
GROUP BY EventData.EventType
HAVING (((EventData.EventType) Between [Type the Start date:] And [Type the End Date:]));
for this, I get no output, but the query runs.
Any comments or help with this is appreciated!!!!!!!!!!!!!!!
View 2 Replies
View Related
Jun 13, 2014
I would like to have a text box display the number of records for a selected title that fall within a selected date range. Been looking around for a while and have this so far;
=DCount("Discussion_Title","Discussions","[Discussion_Title]='" & [cboType] & "' And [Discussion_Date] = Between ([txtStartDate] And [txtEndDate])'")
I get an #Error message. I just threw that together because it describes what I want, but I know there are syntax problems.
View 4 Replies
View Related
Mar 14, 2013
I have a textbox on a form. I am using
Code: =DCount("*","suspend_time_lapse",[Days from Target to Planned End dates]>5)
as the text box source. I get name? or error no matter what i do.
I want to count all records in the [suspend_time_lapse] table where [Days from Target to Planned End dates] is greater than 5.
View 4 Replies
View Related
Aug 19, 2015
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
View 13 Replies
View Related
Aug 7, 2005
Is there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
View 2 Replies
View Related
Jan 22, 2014
I have some code that filters job raised I have 2 text box's txtdatestart and txtenddate after entering. date range between the too text boxs it shows me all job raised with in the period.i have entered what I would like is filter it again by client field using combo box cboclient so if the user enter's client name in cboclient combo box and date range in txtdatestart and txtenddate it will only show jobs raised with in the date range of the client enter in the combo box but if the combo box is empty show.
Code:
Private Sub cmdPreview_Click()
'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working.
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
[code]....
View 6 Replies
View Related
Jan 3, 2006
I'm having abit of a problem with the DCount function where date fields are involved.
Basically, I have a table - TblMain.
Within that table there is a field -DateRegist. The data type of this field is set to Date / Time - Format short date.
Elsewhere I have set up a form with a text box. The idea being this text box will count the number of 'DateRegist' fields where a date has been entered between two set dates. (There will be four text boxes in total, one for each quarter of the year)
When I use Date() etc in the control their are no problems. However, when I try and use an actual date it all goes pear. I figure it has something to do with it being a date field bit not sure exactly what.
This is what I have so far (don't laugh, I know its miles off the mark but I am trying)
=DCount("[DateRegist]","[TblMain]","[DateRegist]=Between #" & 1/4/2006 & "# AND #'" & 30/6/2006 & "#")
I know I can do four separate queries, each pulling off a quarters data and then draw off the Dcount from each of them but after two days of trying to figure it out I would like to know where I'm currently going wrong - (If you consider doing to four queries will be quicker for the abstraction of the data then let me know but I would still like to know what I'm doing wrong for future reference)
Thanks in anticipation
View 4 Replies
View Related
Jul 11, 2015
Im a relative novice with access VBA, and I'm really struggling with using Dcount with date variable. All I want to do is count if a certain date appears in a table. Here is the extract from my code:
Dim WorkoutDate as Date
Dim datecount as integer
datecount = DCount("[WorkOut Date]", "tblworkoutlogs", "[workout date]= " & WorkoutDate)
Whatever dates are in tblworkoutlogs, datecount is still = 0...I've trawled the net and tried many variations of the code but no success!if I change all the date formats to strings in the code and the tables, it works so I know i'm looking in the correct place.
View 5 Replies
View Related
Mar 6, 2015
I'm trying reference a dcount on two fields, one is a string and works fine, the other is on a date which does not.
I've investigated the problem and found a couple of references to making sure I use a # symbol to reference the date but I think the thing that's throwing the comparison out is that the date field stores time as well, even if you can't see it?
Code:
MsgBox DCount("*", "[healthcheck]", "[check_date]=#" & Format([Forms]![MAINTENANCE_FRM]![MAINTENANCE_DETAIL_TBL subform].[Form]![FIRST_HEALTH]) & "#")
I thought should count the records in the healthcheck table that match the check_date field against the first_health field on the current form, but I keep getting a 0 count even though the dates seem to match.
View 6 Replies
View Related
Feb 3, 2014
I can't get the following DCOUNT working for the life of me: DCount("EmployeeName", "tblAttendance", "EmployeeName = '" & cboEmployee Name. Value & "'" And "AttendanceDate = #" & txtAttendanceDate.Value & "#")I have checked this forum along with Google and there seems to be no easy way to do this? I have tried editing the syntax over and over again. I have been able to run a query and get the desired result in that query; however I am unable to call that result in VBA.
View 7 Replies
View Related
Apr 19, 2014
With a form with two fields one is a date field formatted as short date and the other is a lookup combo box that I use to lookup predefined times and is formatted as short time. The date and time are stored in the same table as date/time in separate fields. I attempted to use Dcount, and get syntax error missing operator. Below is one of a hundred that i have tried after scouring this forum and the net. I ended up converting the Appt_Time field to a text field in the table to eliminate one date field but still got no where.
Code:
Private Sub Appt_Time_BeforeUpdate(Cancel As Integer)
'Check table for duplicate
If DCount("[Appt_Time]", "tblexams", "Appt_Time= & Appt_Time & And [Sch_Date] = #" & Sch_Date & "#") > 0 Then
'Message box warning of duplication
[Code] ....
View 4 Replies
View Related
Oct 9, 2014
I am getting something wrong but I don't know what - date related.
Take this code for example:
Code:
Dim varDate
varDate = Date
If DCount("RunningNumber", "AllocatedVehicles", "ServiceDate=" & varDate) > 0 Then
MsgBox "Go Away", vbOKOnly
Else
Go on and do the real work
End If
End Sub
The DCount line is being completely ignored, no error message, it just cracks on as though there were no records found (but they are definitely there!) I have tried:
Code:
Dim varDate
varDate = Date
If DCount("RunningNumber", "AllocatedVehicles", "ServiceDate='" & varDate & "'") > 0 Then
MsgBox "Go Away", vbOKOnly
But that throws up a Type Mismatch (which is what I would expect). Then I tried
Code:
Dim varDate
varDate = Date
If DCount("RunningNumber", "AllocatedVehicles", "ServiceDate=#" & varDate & "#") > 0 Then
MsgBox "Go Away", vbOKOnly
And it gets ignored again.
I am having similar trouble trying to open another form using the same field as the open argument, and getting similar results, so it is clearly me that is wrong.
View 7 Replies
View Related
Feb 8, 2015
I am trying to count the amount of records that were created and closed for last month but I am having problems inserting the correct criteria along with the DCOUNT syntax. DCount("*","obsvnofilterqry","(Date_Closed)=MONTH( Date())").Works fine but figuring out how to get the amount of Date_Closed for last month is proving tricky.
View 11 Replies
View Related
Mar 21, 2007
I am trying to filter out information for an ODBC query I have written, to obviously make it more concise. Because our data is not set up very logically, a lot of my queries are based on text...but that is another story. My current situation starts with a simple make-table query finding certain data within a date range. This is followed up by another simple make-table query to find other specific data within another specified date range. Then I have a cross-tab query between the two tables to locate all the data that shares the same unique identifiers. My problem lies with trying to only pull information from a certain date range. For example, I want information to be included if the data has the same unique identifier as well as falls within +/- 7 days of the received date (dd/mm/yyyy) also listed in one of the tables. Each record will likely have different received dates so I cannot set it as a constant.
Make sense to anyone? I am not confident enough to play around with some expressions...well it is more I haven't been successful at using them correctly.
All help is greatly appreciated.
Thanks,
Jay
View 10 Replies
View Related
Jan 13, 2008
I Have a table that I collect data for numerous ID's. One ID may have 5 dates that is was serviced. It is due to be serviced at set intervals which is calculated from the most recent service date. I'm calculating the next service date in a text box with the DateAdd func. =(DateAdd('m',[Cal Freq],[MaxCalDate])) with the MaxCalDate being a Max func in a different text box for selecting the most recent sevice date. I'm trying to update the [Next Due] field in the [Master Asset] table with the calculated next service date so I can do queries on items that are due service within a date range. If I do an Nex Due Expr1: in the queries to calc the next due service date then do a criteria on that Expr1: such as >=[Start Date] And <=[End Date] it states datatype mismatch? Is there a way to select a requested data range on a calculated type date/time? Or How can I update the [Next Due] filed in a different table?
View 8 Replies
View Related
Aug 22, 2014
I'm trying to use DCOUNT to check to see if a date exists and if it does then i can cancel the input. The code im using is as follows however its returning datatype mismatch.
Code:
If DCount("[pick_date]", "tblPicker_Stats", "[pick_date] = '" & txtPickDate & "'") > 0 Then
MsgBox "Statistics for this date already exist", vbOKOnly, "Error"
End
End If
View 7 Replies
View Related
May 12, 2006
I'm trying to figure out how I can set a parameter on my query to search for any activity that occurs within a month, that falls within a date range. Specifically:
Criteria TextBox: 4/2006
Activity Start: 3/6/2006
Activity End: 5/5/2006
I want this activity to show in my query because the time between start and end occurs during the month of April. It's no problem setting this up for a specific date, ie 4/1/2006, but I don't know how to do it for an activity that occurs all days between 4/1/2006 and 4/30/2006..or for one that starts 4/12/2006 and ends 4/18/2006, or starts 4/12/2006 and ends 5/9/2006. etc.
View 2 Replies
View Related
Jun 18, 2006
Hi All,
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
View 1 Replies
View Related
Oct 10, 2006
I have two tables: tblClasses & tblSchedule. There are joined by ClassID. For each class in the tblClasses there are several records with date field in the tblSchedule. (So each class stored in tblClasses happens on multiple dates stored in tblSchedule).
I want to create a query (SQL view) that would take two date inputs from a form(date range): datefrom & dateto, and return any class of which FIRST day of classes falls in between those dates.
(Or: how can I add a field to my query called [First day of class] that would basically have the value of the first date from the tblSchedule for the joined classID?)
View 2 Replies
View Related
Nov 19, 2007
I need to get records between two dates. Here is my query:
SELECT WGMAHIST_TIMEDTY.TDYPT, WGMAHIST_TIMEDTY.TDYCO, WGMAHIST_TIMEDTY.TDYSSN, WGMAHIST_TIMEDTY.TDYFND
FROM WGMAHIST_TIMEDTY
WHERE WGMAHIST_TIMEDTY.TDYSSN = 464299266
AND WGMAHIST_TIMEDTY.TDYEDT >= #06/29/2007#
AND WGMAHIST_TIMEDTY.TDYEDT <= #09/21/2007#
AND WGMAHIST_TIMEDTY.TDYPT = 1
AND WGMAHIST_TIMEDTY.TDYCO = 8
I am obviously doing it wrong because I keep getting an error that complains about the key work BETWEEN.
How can I make this work? I am using MS Access 2007.
Thanks,
wgma
View 5 Replies
View Related
Apr 7, 2008
I have a form with a combo box containing the names of the Months. What I want to do is then pass the Month name to a query as a date range. For example, select "May" from cboMonth and the query will check the date field for "between 05/01/2008 And 05/31/2008"
Here is what I have in my query but it does not show any records when I run it:
IIf([Forms]![Form1]![cboMonth]="May",Between #5/1/2008# And #5/31/2008#)
Is it even possible to use this type of an expression in the query?
Thanks......
View 8 Replies
View Related
Jul 14, 2005
Hello - I am trying to create a FOrm that will allow the user to type in two dates. From these dates a table will be created and displayed in a List Box.
Does anyone have a very simple example of the code
1. I am trying to write two input boxes to variables.
2. On click I am displaying a message box that repeates the values of these two variables
3. When they hit OK I want the records to appear in the ListBox.
4. From this point I will want to get the data to a report of some kind.
I am very new to this and am trying to see if someone has any code examples....
This is the code I have so far.....Actually I cant get passed #2 above. It shows the message box and the text but not the values of the variables...
I dont think I am using the variables right......I dont understand the syntax needed to write an input box value to a variable......
Please Help....
THanks
CODE:
Option Compare Database
Private Sub BeginingDate_BeforeUpdate(Cancel As Integer)
Dim BD As String
BD = BeginingDate.txt
End Sub
Private Sub EndDate_BeforeUpdate(Cancel As Integer)
Dim ED As String
ED = EndDate.txt
End Sub
Private Sub Command5_Click()
Dim var_BeginingDate
Dim var_EndDate
var_BeginingDate = BD
var_EndDate = ED
MsgBox "The Variable is " & var_BeginingDate & " and " & var_EndDate, vbInformation + vbOKOnly
End Sub
View 10 Replies
View Related
Aug 25, 2005
I am trying to extract records within a certain date range.
My structure is as follows:
Query 1 = pulls data direct from a table. There is a date field which is in the format YYYYMMDD.
Query 2 = pulls data from Query 1 and amends the date format to:
dd/mm/yyyy
Has anyone any suggestions on how I pull data from query 2 from within a certain date range. i.e 01/01/2005 to 01/05/2005
Thanks
View 4 Replies
View Related
Oct 2, 2006
I am working with a linked table that has a field [Originated Date]
I have created a query for this table and on the criteria for [Originated Date] I put the following:
Between [Forms]![Date Input]![StartDate] and [Forms]![Date Input]![EndDate]
I am using a pop up calendar to populate [StartDate] and [EndDate] fields on the form.
The format of the Date field in the linked table is "Text" not sure if this is the root of my problem ?
When I run the Query Manually and input the [StartDate] as yyyy/mm/dd and the [EndDate] as yyyy/mm/dd the query returns the desired results; However when I run the query with from the form It does not return the desired results.
It is driving me crazy not sure where the discrepency is ?
View 7 Replies
View Related
Jun 8, 2005
I have a query which requires date parameters, which the user enters into a form. The form enters the parameters into 4 different queries then runs them to produce a report.
This all works fine EXCEPT for one query.
If I enter my desired date range into the query (in this case it is between 01/11/2004 and 30/04/2005) it returns no results. As the only values in the date fields of the table are 01/03/2005 and 01/04/2005 it should return all the records.
However if I enter the date range between 01/01/2005 and 30/04/2005 it works fine. It also works if I enter 01/01/2000 and 31/05/2005 - it just doesn't seem to like the year 2004!!!
The problem occurs whether I enter the parameters from the form or simply type them into the criteria of the query. Any ideas, it's driving me nuts!!
View 4 Replies
View Related