What an idiot I managed to delete a table in my access database!!!
Its a Junior Tennis Club database with all the childrens details I have downloaded and tried AccessFIX and Advanced Access recovery - Both these pices of software demos show me that the records are recoverable . Is there anyone out there who has either piece of software and would be willing to help - We'd gladly pay but to buy the software is out of our reach as a charitable organisation.
I have a database file that will not compact and repair and it's getting quite large. I'm tempted to try this program, but I was wondering if any of you have had any previous experience with it.
I have uploaded a database that I am working on it, and would appreciate it if someone could look at it and help me out, as I have gone through the forum trying to resolve my issue. There has been some topics on combo boxes and subforms and some of the posts only help me partly to my requirement.
When a user hits the button 'Enter Rate for Supplier' (which is to be double clicked, all buttons on the forms are double clicked) on the form 'Main form' a form 'Rates' comes up with a combo box and a subform. What I want then to happen is that a user selects a 'supplier' in the combo box, and then goes to the subform and selects the class and enters the rate. Note, the supplier names appearing in the combo box are entered through the form 'Enter Supplier Details' which is launched after the button 'Enter Supplier Details' on the main form is double clicked. Details entered through this form populates the table 'Supplier Details'. After entering the class and rate for that supplier in the subform the table 'Rates' is populated.
What I want to see is that after when they save and close the form, they can go back to the 'Enter Rate for Supplier' form select the supplier from the combo box and all the information that was entered previously in the subform for that supplier appears in the subform again. Then the user can produce more records by select more classes and enter rates.
So based on what I have stated above can someone please help me in making this happen. If you can also summarize how you did it, when you reply I would really appreciate it, in where your explanation could also benefit others like myself who is only an immediate. Also by all means you may keep the solution in the database for self education purposes.
I need some help on a problem that has been bugging me for the past 4 months, everywhere i turn i cannot get help for this. I have a DB for stores maintainance and what i have is a form on which stores are ordered. What i need is a way of accounting for the stores as they arrive and adding the quantity to the account for that item. However this must take into account that items sometimes are not received together and may turn up in batches. I had the idea of having an 'On-Order' table but don't really know how to proceed. This is the last piece of my project that i need to complete and it is really bugging me. Any help would be greatly recieved.
Hi guys This is a good one, so any help is most welcome . . . A hardware company has been to a client and installed a new server. On the old server was an Access database including a number of linked databases. Each linked database has a set of mail merge letters set up initiated via buttons and run with the help of vb code. When the new server was installed all files were copied over as they were on the old machine, the linked databases all work as expected, but the mail merge facility is NOT populating the letters with the data from the database.
Would anybody out there have any ideas why this may happen ? I am assured by the hardware company that the only difference between the old and new setup is the name of the server. All folders and files have been copied across as they were originally.
I have uploaded a database that I am working on it, and would appreciate it if someone could look at it and help me out, as I have gone through the forum trying to resolve my issue. There has been some topics on combo boxes and subforms and some of the posts only help me partly to my requirement.
When a user hits the button 'Enter Rate for Supplier' (which is to be double clicked, all buttons on the forms are double clicked) on the form 'Main form' a form 'Rates' comes up with a combo box and a subform. What I want then to happen is that a user selects a 'supplier' in the combo box, and then goes to the subform and selects the class and enters the rate. Note, the supplier names appearing in the combo box are entered through the form 'Enter Supplier Details' which is launched after the button 'Enter Supplier Details' on the main form is double clicked. Details entered through this form populates the table 'Supplier Details'. After entering the class and rate for that supplier in the subform the table 'Rates' is populated.
What I want to see is that after when they save and close the form, they can go back to the 'Enter Rate for Supplier' form select the supplier from the combo box and all the information that was entered previously in the subform for that supplier appears in the subform again. Then the user can produce more records by select more classes and enter rates.
So based on what I have stated above can someone please help me in making this happen. If you can also summarize how you did it, when you reply I would really appreciate it, in where your explanation could also benefit others like myself who is only an immediate. Also by all means you may keep the solution in the database for self education purposes.
I need some help on a problem that has been bugging me for the past 4 months, everywhere i turn i cannot get help for this. I have a DB for stores maintainance and what i have is a form on which stores are ordered. What i need is a way of accounting for the stores as they arrive and adding the quantity to the account for that item. However this must take into account that items sometimes are not received together and may turn up in batches. I had the idea of having an 'On-Order' table but don't really know how to proceed. This is the last piece of my project that i need to complete and it is really bugging me. Any help would be greatly recieved.
Hey guys- I am building a database for my own use- I download info from the Realtor MLS system and then run queries against it. I don't have control over user inputs whatsoever. I download the data into a DBF file- but can save it as an excel or whatever as well. I then am importing THAT data file into Access 2002. I have run into 2 problems right off the bat...
1- the Field names in the data file I am importing are very difficult to understand. There's nearly 100+ field names, so it could get confusing when I'm programming/creating queries. I'd like to change the field names upon import- or- have some way to match the confusing field names in the data file to the easier field names in the table. What's the best way to go about doing this? I tried using Captions- but they dont display the name of the field when using queries. Is there a field matching wizard upon import (maybe a set template for this) or something?
2- One of the fields I will be using to query a lot is the subdivision name. Since the users type this in, I have no way to control what they type. Sometimes they type in 'Willows', sometimes it's 'The Willows', 'Willows Unit 2', etc. Basically, I need them to be restricted into a common subdivision name upon import. I am guessing I would have a table with the 'acceptable names' in the list- and upon importing, take the ones that do not match and ask me to match them up manually. -OR- have a way to where it keeps track of every mispelled or variation of the name in a list so that it accepts/matches is up in the future without problems. Occasionally there may be a NEW subdivision name, so I would need to add it to the subdivision table. I think this is going to be the hardest part. I assume I am going to use the LIKE statement- but have no clue where to start with this. There are literally THOUSANDS of records going into this- so it needs to be able to recognize them all. Obviously I'd like to cut down on the manual overriding aspects as much as possible.
I think I can handle the rest of it, once I get past this (it's just forms and queries thereafter). But it's these 2 things I'm stuck on. Any ideas? THANKS!
I need some help with getting my form(form 2) to autofill from another form(form 1).
Now i dont want to use combo boxes or command buttons as i only want to use the keyboard and not the mouse.
Basically when a customer phones up to get prices they tell me there account code( this is in the customer details table) and i enter it into a text box on form 1 and after pressing enter it opens up form 2(this bit i can do) but i cant get it to open the form and display the correct details from the table on the form.
p.s why is it access books tell you everything except what you want to know.
I've got a label called Agent Matches. The box by it to type stuff in won't let me do that. I checked and it is a text box. My boss is after me, so please help someone! Appreciate it.
I really hope somebody can help me... I put a password on the VBA code in an Access 2000 database. It's been a long time ago and now I have forgotten the password. I need to modify something urgent in that code, but it is locked now. I don't know the password anymore.
Is there some way to gain access to the VBA code again??? Please if you know a solution I would be very thankful!
Here is my problem. I am hoping that someone here can be my hero on this one.
I am trying to figure out what would be the best possible way to track my hospital's staffing. I need a form that I can click on the Active X calendar and have it populate the staffing table. I have built the code and it works great.
The problem is that the way the code works now, I have to have a field in my table for every single date scheduled. For example, right now, I have the staffing table like this:
Name Date Scheduled Date Scheduled1 Date Scheduled2 Date Scheduled3
Of course, after a month, an employee will have worked more than four shifts. I really don't want to add a field for every shift they could have worked because then, after a month, I'll have thirty date fields, and after a year, I'll have 365. So, do you have any ideas about how I can do this without having 365 date fields?? Thank you! If you can help me figure this out, you are my hero.
I have numerous word docs that I need to mail too. What I am tring to acheive is how to link an active record that has been entered on a input form by the user to the various word docs as corressponding letters. This is how the user currently chooses which letter to use However, they are obviously entering the data manually as there is no merge facility.
The merge data is stored in a query called "QryMerge" is there any VB code that I could add to this
Private Sub cboReport_Change() On Error GoTo Err_Handler Dim stDocName As String
If [cboReport] = "L1" Then Dim taskid As Long Dim str As String str = "winword.exe " & "D:DataFrm_L1.doc" taskid = Shell(str, vbMaximizedFocus)
Still beating my head on the wall. I'm sure it is simple but I NEED guidance.
I've made a macro to show a date field when the "Yes" option button is selected and hide it when the "No" option button is selected. I first created it for the form to act on its own --> and it works. Now I want to use that form as a subform in the form [frmTestPkg]. I am having problems figuring out how to reference it properly as a subform.
Here's my macro that works when I attach it directly to my form:
Condition:[Forms]![frmsubcruiseplan]![CrPlRecvdNo].[OnGotFocus] Action: SetValue Item: [Forms]![frmsubcruiseplan]![CrPlSubmDate].[Visible] Expression:No Location: "On Got Focus" Event for the option button "No"
Condition:[Forms]![frmsubcruiseplan]![CrPlRecvdNo].[OnGotFocus] Action: SetValue Item: [Forms]![frmsubcruiseplan]![CrPlSubmDate].[Visible] Expression:Yes Location: "On Got Focus" Event for the option button "yes"
I have followed the pattern provided previously of
Forms![main form name]![subform control name].Form![control name]
but cannot get it to work -- obviously messing up somehow.
The reference I tried in the condition looks like this
--> and with or without the setvalue information included I get a "The object you referred to as an OLE object isn't an OLE object" error.
Perhaps I am not identifying the subform control name properly? Or maybe I should be referring to the "Cruise Plan Recvd Option" instead of the individual control boxes (but it worked as a form)? Please spell it out for an idiot, what this is supposed to look like. Many thanks!
Hello all. I'm having a problem running a query that compares one fields to 5 others. The code is below. I'm sure it's not correct because the results don't look like they should. I have these fields:
Account Number Transaction Type Code Bal unapplied code 1 Bal Unapplied code 2 Bal Unapplied code 3 Bal Unapplied code 4 Bal Unapplied code 5 field_result
I wrote the code to add "UF" before comparing any of the "Bal Unapplied code" fields to the "Transaction Type Code". I am trying to first see if the code in "Transaction Type Code" is located in "Bal Unapplied Code 1." If it finds it, then I want to put "Found" in the "field_result" field. If it doesn't find it, then move onto the next field and so forth until it goes through all 5 fields. If it can't find a match in any of the 5 bal fields, then I want to populate the "field result" with "Not Found"
If someone could help I'd be forever in your debt!
Here is my crazy code:
Iff("UF"+[unapplied balance_update].[bal Unapplied Code 1]=[Unapplied balance_update].[Transaction Type Code],[Unapplied balance_update].[field_result]="Found",iff("UF"+[unapplied balance_update].[bal Unapplied Code 2]=[Unapplied balance_update].[Transaction Type Code],[Unapplied balance_update].[field_result]="Found",iff("UF"+[unapplied balance_update].[bal Unapplied Code 3]=[Unapplied balance_update].[Transaction Type Code],[Unapplied balance_update].[field_result]="Found",iff("UF"+[unapplied balance_update].[bal Unapplied Code 4]=[Unapplied balance_update].[Transaction Type Code],[Unapplied balance_update].[field_result]="Found",iff("UF"+[unapplied balance_update].[bal Unapplied Code 5]=[Unapplied balance_update].[Transaction Type Code],[Unapplied balance_update].[field_result]="Found","Not Found”)))))
