DLookup - Using Two Form Fields (Number And Drop Down Text) To Query Table For Data

May 29, 2015

Having problems getting dlookup to work in the control source field of a text box.

My form has fields : Catalog # (numeric value) and Country (drop down text selection).

I would like to query a table CatNameList for a name (text) if the catalog # and country find a match on the table.
My field names on the CatNameList table are : Name, Number (to validate against the Catalog # entered on the form) and CName (to validate against the Country drop down on the form).

I am successfully able to populate the name from the CatNameList table on my form using lookup of the catalog # using this :

=DLookUp("Name","CatNameList","Number = Form![Catalog #]")

However, I will eventually have several catalog numbers that will be identical in the table CatNameList, thus why the country is important as the second criteria to be added into the dlookup.

I have tried for a few hours unsuccessfully to add the second portion to my dlookup.

This is what I have currently (not working) that I have been playing with, I'm sure I'm missing a quote mark, & or something simple.

=DLookUp("Name", "CatNameList", "Number = Form![Catalog #] And CName = ‘”& Form![Country] & ”’”)

View Replies


ADVERTISEMENT

Forms :: DLookup - Using Two Fields (number And Drop Down Text) To Query Table For Data

May 29, 2015

DLookup function. (this is for a stamp collection database).

On my form ("InventoryInput") I have a text box called "Catalog" for a numeric entry and a text combo box for selecting a "Country" in drop down list.

I want to query a table called "CatNameList" to get the "StampName" of the item (based on the entries of Catalog and Country) and populate that name in the text box. The fields in this table are called "StampName", "CatNumb" & "CName" respectively.

I have successfully placed the following expression in the control source of that textbox and able to populate the StampName I need based solely on the catalog number alone.

That express is :
=DLookUp("StampName", "CatNameList", "CatNumb = Form![Catalog]")

So it will populate the "StampName" data to match the "Catalog" number entry just fine.

However, I need to add a second layer to incorporate the Country.

Example : There is a catalog "1" for "USA", and a catalog "1" for "Canada" but both have different "StampName".

I have been attempting to get that second piece added with no success. Here is the expression I have been trying to get to work :

=DLookUp("StampName", "CatNameList", "[CatNumb] = " & [Catalog] & " And CName = '" & [Country] & "'")

Right now, the text box is just blank with the above expression. I thought it may be because there was no match found, but I have triple checked to ensure I have the spelling correct on the country name in both places.

Basically, I just need the dlookup to take the "catalog" and "country" off the form and match it to the "CatNameList" table fields of "CatNumb" and "CName" to give me "StampName" field back on the form.

View 4 Replies View Related

Tables :: Data Conversion - Short Text Fields To ID Number

Jun 15, 2014

I have an old Table with Movies, Actress, Actor, & Director Fields & I have converted it to .accdb. I want to turn those short text fields to an ID number. I have built Tables for those fields(indexed no dups) with an ID field. I have over 5000 records in the original table and dont want to input those numbers by hand. I am using Access 2013.

View 5 Replies View Related

Forms :: Data Entry Form - Drop Down List With Free Text Option

Aug 6, 2013

I have a simple data entry form with drop down facilities on 2 fields. One of these fields incorporates a drop down list from a table but there are occasions when I wish to make a free text entry for the single record, but do not wish to add it to the drop down list.

I have tried to achieve this with a Combo Box but without success, although I am sure that I have read that it is possible.

View 14 Replies View Related

Forms :: Referencing Text From Drop Down Via ID Number

Jul 8, 2014

I know this is simple, but I feel like Simple Jack this morning. I'm trying to take the text from a drop-down menu and use that as part of the form caption. However, the text is not what is bound, the ID number is.

View 4 Replies View Related

Table Fields (Name / Number) Dependent On Another Tables Data.

May 18, 2006

I have an ... interesting issue. I am wondering if others have dealt with this. I have a solution, but am not the happiest with it.

I basically have 2 databases here. (Or I will when I'm done making them) and one is dependent upon the other. In fact, the 2nd's tables are dependent upon the fields in the first database's table.

This database is for quality control checking purposes.

First off,

Database 1:
Basically a list of standardized audits and what needs to be checked for those audits. What needs to be checked can change as things progress, but stays pretty standard.

Database 2:
This will hold the checks that the QC branch will do, based on what type of Quality Check they are doing, they have an audit standard. This audit standard exists in database 1.

What basically ends up happening is that the data in Database1 become Table fields in database2.

Example:

Database1:
Radio Check Audit Standard.
Needs to check following:
Process Specs
EDMS Drawings
Manuals
SoP / Policy
Used Radio callback
Used radio during emergency
Etc.

Another Random Check Audit Standard
Needs to check the following
Process Specs
EDMS Drawings
Manuals
SoP / Policy
Did something specific for this Audit
Didn't do something else, also specific for this Audit.
Etc.

Continue on with other Audits.


Database2: Will keep track of all the quality checks that have been preformed.

Today we will check Radio Protocol
Did they:
Process Specs
EDMS Drawings
Manuals
SoP / Policy
Used Radio callback
Used radio during emergency
Etc.

Yes, No as necessary.

2 Days later, we need to do another QC on the Radio Protocol
Need to check if they did:
Process Specs
EDMS Drawings
Manuals
SoP / Policy
Used Radio callback
Used radio during emergency
Etc.


Etc.


But what will be checked for in Database2 depends on what the standard is for the "Radio Check Protocol," or etc.

Right now, i see 2 options:

Option1
Make the 2 databases, and when a user "Picks" the Radio Check protocol, a linked table is filled with the Name / object that needs to be checked with a field in the same row to hold the data if the object was done / not done etc.
The fields in Database1 are automatically put into this specific instance of Quality Check, etc.

Only problem with this: Requires coding to auto update. Easy to do, but if errors occur, things will screw up.

Option2:
When the user picks the Radio Check protocol, simply allow a subform with a refreshed drop down box. Allow user to pick items they need (Limit it to only this Audit list, etc) to set to true. Assume false for other items not specifically chosen by user.

Problem with this: If an Audit standard changes to remove an item, or add item. Any quality checks done will also change for the assumed false items. If another Item added in, then all old QCs will now also have that item added in / reported assumed false. And if it is deleted, all old QCs will loose the item that was reported false.


I'm seen the first option as the only viable one.

Am I missing this, is there some other way to do this that would be better / wiser? Etc?

Kelemit

View 14 Replies View Related

General :: Data Entry Form - DLookup And Storing To Table

May 8, 2015

I have a simple data entry form based on a table. However I have a few fields that I do a lookup in a field on the form from a query, and yes I know I should not have a lookup in the control source however, this is the way that I will be doing it on this occasion.

=DLookUp("[Salary]","[Salary Query]")

How I get the value from this unbound field to enter into the actual field in the table. Do I bring the actual field into the form and hide, and do some sort of after update, as I have tried and it does not work.

I have called the unbound field with lookup "Salary Level Base" and the actual field in the table is "Salary Base".

View 5 Replies View Related

Convert Text To Number In Multivalue Table Field Without Data Loss

Oct 21, 2012

I have a multivalue text field called "Groups" that is generated through a relationship with another table called "Comments". When I set this up I left the field as a text field when it should have been a number field, and now I can't use the database with sharepoint, because the field needs to be a number field.

My Question is there a way to convert it without loosing all my data, as there are over 5000 records?

My Table with the multivalue field is called "Contacts", the field is called "Groups".

I tried update and append queries but I must be doing something wrong....

View 2 Replies View Related

Number Fields In Text To Number Field, Formula For Fiscal Year

Nov 26, 2004

Date of Birth (DOB) field etc. in one program are text - how do I make another file with the same data into number fields for Date of Birth field etc? When I copy data to file that has number fields the 09252004 is changed to 9252004. Can I get reports with the correct Date of Birth in them by moving data from text file to number file?

There is data entered monthly in file and formula has been set up for January, February etc as ---quarter: Int(([month]-1)/3)+1. I would like formula for the fiscal year for April to be counted as month 1, May - month 2, June as month 3, July as month 4, August as month 5, Sept as month 6, October as month 7, Nov as month 8, Dec as month 9, Jan as month 10, Feb as month 11 and March as month 12.

Thank you

View 6 Replies View Related

Forms :: Form Asking For Number But Table Is Text

Mar 2, 2015

I have designed a database where there are several forms that pull information from the back end table and only one used to input data. I have changed the table to allow "Year Group" to be text so that I can input "R" for our Reception. On the input form this is fine, however, on the two forms that are used to compile reports it is saying "R" isn't an allowed value.

I have attached the front end file, back end table and the two affected tables are frm_Report Builder and frm_Analysis Builder. I'm only a beginner and I'm sure this is easy but I can't seem to find where these forms say this should only be a number

View 11 Replies View Related

How To Update 2 Data Fields From A Drop Down List

Oct 22, 2004

I am an Ms Access newbie and need some help on how to update 2 fields from a drop down list.

The drop down list has 5 columns. The first column is the partname that is bound and updates the table with that partname. I want to take the
listprice which is the 5th column and update a field in the table with the listprice that corresponds to the part name.

Thank you.

View 5 Replies View Related

General :: DLookup - Resetting Sequence Number In A Table?

Oct 8, 2013

Occasionally a user of mine needs to reset a sequence number in a table.

A few months ago I made him a simple app that has two text entry boxes and a button. The first text entry box uses a dlookup:

Code:
=DLookUp("sSessionNumID","qryGetAPIsessionLastValue")

...the other textbox ties to an update query, which updates the sequence number with the new value supplied by the user. Simple.

Then about a week ago it stopped running the dlookup part - nothing shows in the text box that is to show the current sequence num.

Oddly, if I enter a value in the update text box and press the button to update the sequence number (which still works) -- the previously dormant dlookup textbox now shows the new value - so it works ...it just doesn't want to work on this one workstation unless the update query is run first.

What can this be? The update button merely calls a DoCmd.RunSQL with both an insert (storing old value locally in ms access table) and an update (updating the sql server table's seq number using an ODBC DSN and sql server driver).

It's almost like the dlookup falls asleep now and won't wake up until the update is run...

View 2 Replies View Related

Modules & VBA :: Selecting Fields - Change Text To Include Data From A Table

Nov 5, 2014

I have an on click event to mail a report which works. I want to change the text to include data from a table.

I changed the code to include the field 'office' from the table 'Checks' but get an error saying 'Object required'.

Code is :
Private Sub cmd_mailreport_Click()
Dim office As Object
Set office = Checks.office
DoCmd.SendObject acReport, "checks", "PDFFormat(*.pdf)", _
"info@company.com", "", "", office & " Daily Check - " & Date, "Attached is the report for the office", _
True, ""
End Sub

View 1 Replies View Related

Create A Drop Down List Of Number By Creating A Table And Inserting Combo Box?

Oct 14, 2011

Just fumbling my way around Access 2007, is the only way you can create a drop down list of number by creating a table and inserting a combo box? I am trying to create a list of hours for example:

0.5
1
1.5
2
Etc...

View 1 Replies View Related

Creating New Table From Form Data Fields/clreaing Datat Fields.

Apr 13, 2008

I created a form in Access that retrieves data from a table. Inside the form, I am able to access/populate data fields with data from the table. I also have data fields, inside the form, that requires key-in data. I have some how lost the ability send all data field information to a second table and clear existing data fields for new entry.

Questions: What settings, code or buttons can I use to send/store data field information to a new table? What settings, code or buttons can I use to automatically clear all data fields from my form once data has been sent to the new table?

View 7 Replies View Related

Use Form & Query To Search For Text & Number

May 19, 2006

Hello,

I have a form with a listbox on, the listbox uses a query to populate it, which returns a list of client names. The idea is, when I enter the clients name in a text box, the list is narrowed, through use of the query.

This works fine, and always has - very pleased with it, the problem comes when I decide I want to be able to search on the account number as well - which it always throws errors about.

I am using the following query (posting the sql, hope that is OK)

SELECT tblSafeKeep_Clients.SafeKeepClientID, tblSafeKeep_Clients.Title, tblSafeKeep_Clients.Initials, tblSafeKeep_Clients.Surname, Format(tblSafeKeep_Clients.DesignationNumber,"000000") AS Expr1
FROM tblSafeKeep_Clients
WHERE (((tblSafeKeep_Clients.Surname) Like "*" & [Forms]![frmSafeKeep_SelectClient]![txtSearchText] & "*")) OR (((tblSafeKeep_Clients.DesignationNumber)=[Forms]![frmSafeKeep_SelectClient]![txtSearchText]));


The problem is because I am only using ONE text box, but the surname is (obviously) text, and the account number is (obviously!) a number. SO - it throws a wobbler about it being too complex to evaluate when I try to search for a surname, trying to search for an account number works just fine.

Any ideas how to get around this?

View 3 Replies View Related

Dynamically Create Text Fields In Form And Fill Data

Mar 30, 2007

I want a help on this complicated issue:

On running a select query with "a*" of names in a table:
Results are : America, Argentina

Now I want this to dynamically create 2 text fileds in a form and fill America &".snp" in first and Argentina &".snp" in 2nd filed.

It is not regarding subform to display data of query result.

This I am going to use to add attchment for outlook email session as being discussed in my Email from access with attachment thread.

View 2 Replies View Related

Select From Drop Down To Populate Three Fields In A Table?

Nov 6, 2012

I would like to be able to select a value from a drop-down and by doing so be able to populate three fields in a table.

View 12 Replies View Related

Search Multiple Text Fields In A Table From A Form

Aug 8, 2006

Please bare with me as I am an Absolute Access VB code novice . I have a Form in my Access DB and I found the Following code on this site and placed it behind my search button :

Private Sub SearchButton_Click()
DoCmd.OpenReport "All users", acViewPreview, , "[AUP].[First Name] = '" & Me.[Text34] & "'"

End Sub

The Search works great but only searches on the 1 Field "First Name" . How would I expand the VB code to include another 2 fields within my table . ( the other 2 fields I want to serach appear on the Form ) .

View 4 Replies View Related

Number Fields Exporting As Text?

May 22, 2014

I want to export the results of a query to Excel. All of the fields in the query are number fields. But when I export to Excel, the fields are stored as text. In fact I get the error message "number fields stored as text" in Excel. Why this is happening?

View 3 Replies View Related

How To Have Users Drag And Drop A Document Into A Text Box Within A Form

Jul 7, 2015

how to have users drag and drop a document into a text box within a form and have it create a hyperlink. What I need to know now, is if there is a way that when a file is dropped into the text box, it only shows the icon associated with that file, or at the very least, edit the hyperlink to only show a certain text. The files I need to see are all in a networked drive, so the hyperlink addresses can be quite long, and ultimately I'd just like the hyperlink to say "letter". Showing the icon would be a plus.

View 3 Replies View Related

Forms :: How To Save Result Of DLookup Function (used In Unbound Text Box) In A Table

Oct 17, 2014

I have a form based on query. On form i am retrieving data from another table using DLookup in a unbound text box. So I want to save the result of DLookup function in another field/table on same form.

View 8 Replies View Related

Queries :: Design A Query To Show Only Empty Field As TEXT Fields In Table

Mar 2, 2014

I am just querying a single table, no relationship involved with another table. As you can see form the attached jpeg, the ZIP field in some cases is empty. I would run a search using Is NULL but the field is NOT numerical. It's a long story but I had to make this field a TEXT field. Basically, what statement do I have to insert in the criteria field to just pull up the EMPTY ZIP fields?

View 2 Replies View Related

Set Fields On Form From Table Data

Jul 31, 2006

I have a command button that I want to automatically enter the date into a date field on the same form.

Setvalue
item: [Forms]![FRM_View_Orders]![OrderDate]
expression: Date()

This works in Access 2000 -- but in Access 2003 I get this error message:

"Object or class does not support the set of events"

Please can anyone help me with what I am doing wrong in 2003.

Thanks!

View 11 Replies View Related

Forms :: How To Populate Subform Fields When Drop Down Selected In Main Form

Mar 12, 2013

I have built a form that holds details of training records. What I want is when a drop down is selected in the main form, that it will populate some of the fields in the subform. I have this working at the moment, that for example, when a certain course is selected, that their modules will appear in the subform. Where my problem arises is that I have a relationship between two tables that I want to appear on the subform, so that details can be filled in on the subform against the list of modules that automatically appear.

View 2 Replies View Related

Using DLOOKUP To Fetch Data From Table

Oct 28, 2013

I am facing issue with DLOOKUP,

Actually the program flow is like i have a table of 25 fields, ID as PK and item name, item code and remaining is the date as field name,

Below mentioned is the Table headings,

"ID" "Item Name" "Item Code" "10/29/2013" "11/5/2013" "11/12/2013"

Problem is that when im doing dlookup on date getting wrong result...

This is what I am using in my codes.

DLookup("11/12/2013" , "tbl_Name", "ID = " & rs.Fields("TRANSID") & "")

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved