each boarding point has 6 different pickupcodes and pickuptimes
i am trying to create a form, which is currently displaying data from an query depending on which tour is selected from the main form.
my current dlookup is like this.
=DLookUp("[pickuptime]","boardingpoints","[boardingpoint]=Forms![pickup list]![boardingpoint]")
what do i need to add to the end of this so that it also looks at the pickupcode as well as the boardingpoint to display the correct pickuptime and not just the first one it comes to?
I have an inquiry about using dlookup to retrive all fields from a table that are using the same criteria. Here's the table structure
Table1: ID (Autonumber) Number Code Grade
I have the following data: Number Code Grade 4 15 68 4 52 78 4 17 69 5 85 83 5 28 17
I am using this to retrive values for number 4 but I only get the first row DLookup("Code", "Table1", "[Number] = 4") DLookup("Grade", "Table1", "[Number] = 4")
I get only as a result 15 and 68, how can I retrive all the rows that have Number 4?
I have the following DLookup statement which if the number of bags is greater than 0 will find the previous accommodation name. How do I get it to only select the accommodation name if the CustomerID field is the same as the previous as well?
I'm back yet again with a new and intriguing set of problems. I am building a fancy report and Come to find out you cannot use SQL to return one simple number in a text box because even though you know you will write the statement to return only one answer everytime, access doesnt understand that so we can do a domain aggregate thing with DLookup. OK fine I have to do alot of them but still OK, here is my issue I can get DLookup to give me what I want if i type into each control source the criteria that I want to return.
I want to lookup a number from a recordset but there are two things that make the number unique date and strain. strain is easy to cough up in the right place because i will hard code that into the control source dlookup, the part that is killing me is the date I can get a dlookup to give me accurate results based on multiple criteria, but how can i get that to include the date for which I am running this report. I do enter the date parameter each time i open the report.
Here's what i got so far
=DLookUp("csQuantity","SpawnScheduleCulSpawn","csstrain='AC-PA'" & " AND week = #4-29-07#")
That returns the answer i want, but i have 50 of these text boxes in one report so i cant go through and write the date in each one.
how can i make the part following " AND week =" dynamic so that it runs the date that i entered as the parameter for the report?
I am using MS Access 2010 and have an issue with one of my forms. First off, I have a table called coefficient which contains a column MIN, a column MAX, and a column COEFF.In my form, called CALC, I want to grab a number that it is in textbox [Text12] and place the related coefficient number in textbox [Text15].I placed a control source in [Text15] using =DLookup("[COEFF]","coefficient","[Text12]>[MIN] And [Text12]<[MAX]").
When I added this field/function to the query, I got #error values and when I clicked on one, I got an error that said:
The expression you entered as a query parameter produced this error:The object doesn't contain the automation object 'Please Enter Year'.'
I assume the problem is that I have the user filter the report by use of the Like() function for [Year] in the query when the report is accessed. How do I tell the DLookup function to search the column as filtered by the Like() function?
creating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below
Brand Form Area Changed
I also have another reference table labeled refevalareas. The fields in this table are as follows
BrandName FormName AreaName PointValue
I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..
I'm having trouble with DLookup() using dates as part of a multiple criteria. I'm using the following;
Code: If IsNull(DLookup("ExchRate", "TBL_DDPExchRates", "CurID = " & Me.Combo4 & " AND ExchDate = #" & Me.ShipOBDate & "#")) And Me.Combo4 <> 2 Then
It seems that if ShipOBDate is any date between the first and tenth of the month the DLookup fails to locate the appropriate record. I can't understand why as ShipOBDate and ExchDate are both formatted as Short Date and ExchDate is being populated via an OpenArgs which is derived form the field ShipOBDate..Is the fact the the date is getting converted from a date to string and back to a date some how upsetting things
I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working
The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:
I have a form where I am using two combo boxes the second combo box fields are being based on what is selected from the first comb box. When I enter the DLookup criteria into the text box I am trying to lookup based on the selection of the combo boxes it returns nothing. Here is what my DLookup looks like: DLookup("[BranchNumber]", "[tblAllADPCoCodes]", "[ADPCompany]= '" & [cboADPCompany] & "' And [LocationNumber]= '" & [cboLocationNo] & "'")
I can't seem to get past this expression/criteria problem.
[Actual] is my field I want to grab data from [L3-4-5] is my main table [CDATE] is a form control where the user enters a date [Quarter] is a number field and want it to equal 1 [Partname] is a text field and string it to equal 1
My current expression is:
=DLookUp("ACTUAL","L3-4-5","ID=" & [CDATE] And "[QUARTER]=1" And "[PARTNAME]='1'")
Although my other expression on another form works.In my if code statement I have
I have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.
Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])
I have a table tblDateGroups, with two field, [Group] (like This Week, Next Week, Last Month, etc) and [Code] that holds the code for criteria for each group in a query. I know the code is fine (like next week = Between Date()-Weekday(Date())+8 and Date()-Weekday(Date())+14 ) because I tested before putting in the table.
On my form I have a combo box that list all the [Group] and i hidden textbox that looks up the code based on the cbx after update...all that is good.
However, when i try to requery the report the criteria is not working. I am simply using the date criteria to read the hidden text box with the code string.
the error code is "This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables."
I've never used DLookup before and I can't get it to work for me so far.
I have 1 table which contains products and different properties of each product, such as the weight of the product.
I have created a query which sums the weight of all products, but only for those that have a value >0 in a certain field. This all works fine.
Now I simply want to display that calculated total weight in a text box on a form. So I thought DLookup could be used for that. But I can't get it to work, maybe because I'm not putting in any criteria? In the control source of the text box I've put the following:
=dlookup("[TotalWeight]","qryTotals")
I don't have any criteria, I just want the value from my qry expression. The textbox on my form now displays #name?
I have been working on a query in my database and I would like to look up a Number Value from another table based on a Number ID field and the Number Date in the Number Values table, where the Number ID field in the table agrees to the Number ID Index field in the query, and the Number Date field in the table agrees with the Initial Date field in the query. The Dlookup syntax I currently have is as follows:
The Dlookup shown above does not return an error, but it returns a blank field. I know that individually, the Dlookup for the Number ID works, but when I add the And for the Number Date the Dlookup returns a blank. Also, I have verified that there are existing records where the Number Date and Initial Date fields agree.
Also, I changed the format of the date fields in the tables to be ShortDate, thinking that the Timestamp was causing the Dlookup to not find a match. I also tried to use the DateValue() function within a query to reformat with not luck.
I need some syntax in setting 2 criterias for a DLookup query.
I've attached a sample db with 2 tables: Main & Timesheet
I need a "combo" query showing (on the same line) all Qty for Transcodes N, 1 & 2 where the Staff number and TSNum is the same.
I'm sure about the logic but the syntax is letting me down.
I can pull in 1 of the criteria E.g.:
OT1: DLookUp("Qty","ExOT1","[Staff] =" & [Staff])
But can for the life of me not script the second criteria in.
So in my result of ExCombo I'm getting Staff 11 showing 4 under OT1 while I know the result does not apply for TSNum 29832 as indicated hence the need for the 2nd criteria.
Since I have to change some of the values to text inside the query it might be best to have a look at the attached db rather than just suggesting the correct syntax .
I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:
Employee Table) has the fields: Name, Type, Salary
Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:
Code:
Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")
I can get the first criteria to work but can't get the second part to work - currently it produces an error.
I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.
I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.
So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.
If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.
In the "qryEmployeeWTax" i need to Lookup the [InitialTax] from the "qryreftbl_WTAX" based from the [ETPES] and [SalaryAfterStatutoryDeductions], so i am using this function:
