I have a DAP that many users have access to.When opened the Dropdown is blank on some peoples and populated on others. Is there some setting that can cause this. I have checked to make sure that they have the allow ActiveX Controls to run files on this computer checked. Any other setting that may cause this? Thanks.
View RepliesI have a form where I have two drop down list box.The first list box is called Transaction_Type. It contains three values: Created, Allocated and Sold
The second list box is called Product_Status. It contains 6 items: Allocated, Produced, Reworked, Shipped, To Be Produced, Unallocated.
I have a products form. When a user created more inventory they will selected in the drop down list create, then a quantity. Then I would like the status of the product to update to "Unallocated".
When the user placed an order but doesn't finish it they will choose the status of the inventory to be allocated so I would like the product status to be updated to allocated automatically.
They other status the user will choose them self and do not need to be linked to each other.
In my vba code I have tried with the OnClick and AfterUpdate sub procedures with the following code.
If Me.Transaction_Type.Value = "Created" Then
Me.Product_Status.Value = "Unallocated"
End If
If Me.Transaction_Type.Value = "Allocated" Then
Me.Product_Status.Value = "Allocated"
End If
Yes when i select "created" from the drop down list it does not change product_status to say "unallocated"
(in using access 2007)
I must create a database for the company that I work for that covers the maintenance history of our stone crusher plant. In this database I have two dropdown lists. The first one is for the equipment and the second one is for the different types of parts that has to be replaced or fixed.
Not all of the equipment uses all of the listed parts, but some parts are used on more than one type of equipment.
I have already created a database that lists all the equipment and another one that lists all the parts.
What I want to do now is create a Yes/No box for each type of equipment so I can mark which parts is used by which equipment.
Then you must be able to select the type of equipment from a dropdown list and then select from a dropdown list that only has the parts that is used by the piece of equipment.
I am using Access 2007
I have a form, combo box selection, when i make a selection, all the info is good on all my tabs, which holds the subform.My issue is, on one of the subform, it's a data entry form, where I want it to be on a new record page. instead it list all records. I want my users to see a blank page, but have one field populated. is this possible?
1) blank data entry page, but with a populated field?When a CU Name is selected,I want the (Enter Note) tab to go to a data entry or last page or new page.I have tried putting it to data entry form, but the CU Number will not populate.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedI have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
Hi all,
I am very new to Microsoft Access, and hope somebody can help me. Apologies for what I am sure is an easy subject - but I dont know what keywords to search on!
Basically, I need to have a drop list of say 5 different products. Now depending on the product will lead to different field boxes (say each product has 15 fields, 10 which are the same, but 5 which are unique to each product). I basically want the form to change dependent upon the product type. As I say I am very sketchy on this, so feel free to treat my like an idiot! If anyone could give me a hint as to what help topic this relates to, or give me a brief overview of what to do, that would be very much appreciated. The information will be downloaded from an ODBC if that makes any difference.
Many thanks in advance
Mike
Hi,
I create a dropdown list, which has 3 columns with column heads.
Can we set Bold format on the column heads?
Thanks.
Hi,
I want to create the dropdown list on the form, the dropdownlist will have 5 values, I want to give out description of each value when the user move the mouse on the value. Does the dropdownlist control have this option?
Hi!
I have a tables.
One is called: products => prdouctID,productName, ProductPrice
I created a dropdown list.
To read in the values of productName.
I wanted to have a textbox / label which will update the productPrice.
If i select productName as "Pirates", the textbox/label will show $50.00
If i select productName as "Who let them out?", the textbox/label will show $80.00
I have managed to do the dropdown list but cant seem to figure out the label / textbox.
Please advice?
Cheers!
Darence
I'm trying to set up a database of books in a small library - each book has a prefix (Maths, English, Art etc) which I want users to be able to pick from a drop down list - I can do this, but the next field is a sub-category - is there a way of populating the dropdown list for the sub-category field depending on the chosen entry in the prefix field. eg if maths was chosen I would like the user to have the choice of number area, volume etc. but a different choice if the prefix was English.
any help very gratfully received - it seems to be a simple problem but it has me stumped.
I am trying to put a DROPDOWN LIST BOX in a access 2003 form, NOT a combo box. I only need this so I can disallow users from manually entering data into the combo box by typing it in. I want them only to be able to choose it from a list. I think that a LISTBOX is the only way to do this, other that using a straight list box, which would use too much room. However I cannot find any way to add this to a form. Any thoughts?
Thanks,
Todd
Good afternoon,
I need to use a selection from a drop down list to change the criteria in a query as opposed to typing text in a parameter box. This is to allow the user to choose from a list and then click on a command button to move to the next query. There are 20,000 records in the table. The series of queries will take the user to 1 or 2 records in 3 or 4 mouse clicks.
Thanks
With Access 2000, for the On Focus event, typing Me!MyCombobox.Dropdown displays the entries in the drop down list. With 2007 the list appears momentarily and then disappears. Is there a way to keep the list from disappearing
View 7 Replies View RelatedI have a problem which occasionally surfaces.
When trying to use an edit form nothing comes up but a blank page. No fields, nothing. The database is split and when I open it. It shows as read only. The database is only used by myself and another and the other is not accessing it. I've tried closing and opening the database and also compacting and repairing but there is no difference to the particular form.
the problem is cleared up the next day when the db is accessed again.
All other forms are ok to use, and there are now 2 forms which this happens to. Has anyone experienced or seen something similar?
Hi,
I would like to be able to select multiple items from a dropdown list like we often see on web forms. The kind where you hold down the control key to select up to 5 items. Is this possible on an access form? If so, how would do we implement, and how is such data be stored?
Thanks!
~Bruce
I have a drop-down list that when a person's first name is selected then it will fill in the person's middle and last name. Is it possible to use a name that is frequently used as the default so that it is always filled in on the form? More specifically, how will it work so that the other fields (middle name and last name) will also be filled in with the default first name? Or is this not possible to do?
View 4 Replies View RelatedRefer to the image below:
I want to make a form with the following criteria:-
Has one dropdown list. (like in the picture) Has one table. (like in the picture) When I select an item (for example: Syarikat A Sdn. Bhd.), the table below it (yellow circled), will automatically change data according to the corresponding selected list so that user can edit/add/delete the data in the table.
The issue: I already made the dropdown list and table, but how can I make the number 3 condition.
Is it good to use (to make) Data Access Page to access the database (and put it on the web ) ?? :confused:
View 1 Replies View RelatedI have a photo (jpg format) which store OLE field in a table. But, I would like to display it in a Data Access Page. But, I have being prompt the following error: "You tried to drop an OLE or long binary column onto your data access page. There is no HTML control which binds correctly to this column type."
Do anyone know how to overcome this problem?
Hi,
Can anyone tell me how I can get my data input web page to load with a new fresh input page. At present, each time a user opens the form, it displays the last record that was input previously.
When using a form, the record properties can be changed so that when the form is opened, it displays a new blank record to fill in. I cannot find any properties in the web page design view that allow it to be set to startup with a new blank page rather than the last record that was entered.
Any suggestion?
Thanks
Hi,
So i have made a Data Access page using the wizard from a table called Employees
I want the Access page to have some sort of search button so that they can quickly find an employee, rather than scrolling through all 100 records.
How can i do this?
Thanks Brian
Hey guys,
I'm somewhat new to MS Access. I'm trying to allow a user to update, add/delete records through a data access page. I am able to view the query, navigate through the results, but I am not able to make any changes. I get a pop up message saying the record set I am using is read-only. As far as I know, my table is fully editable. Anyone have input on this issue?
Hi All,
I have created a Data Access(DAP) Page to append the sales order received on phone. The Data Access Page is linked to query which has autonumber field to store the Sales Order. I have a textbox on DAP for Sales Order No. The autonumber generated in Table is different from autonumber generated on DAP. I want same the autonumber on page and in table.
Thanks for time.
S Acharya