Data Labels On A Chart
Dec 16, 2005
I'm in the middle of doing a huge survey at work. The end resut will be a report which reflects the survey answers as graphs.
The graph part I have down. There will be one graph for each question. Within each graph are three groupings: Classified, Management, Certificated. Within the groupings you will see at least three bars where each bar represents a grouping of answers.
Example: the classified grouping may have 2 bars. One bar represents 16 classified people who said "Agree" to question 11 and the other bar represents 5 classified people who said "Disagree" to question 11.
...ok, so now I have all that, but I have to have data labels on the graph. I can do that, I know where to click, but unfortunately it comes up as the actual number of people who responded this particular way (agree, disagree, etc.) and I need the data label to show up as a percentage.
Where do I make the change so that it shows the percentage of 16 classified out of 21 who said "Agree"?
Hopefully it's not too confusing. Thanks!
View Replies
ADVERTISEMENT
Jan 23, 2014
I would like to remove small value datalabels in a stacked column barchat.
If you look at the image attached, the small value datalabels tend to clutter the image.
My graph is a MSGraph.Chart.8 inside a Report.
I am working with Access 2010.
Looks like the only possibility to remove the small values is to do that programmaticaly in VBA.
I would like a method that I could call with two parameters : graphname and a threshold value as of which small value datalabels are not displayed.
View 7 Replies
View Related
Apr 7, 2008
before i pull out any more of my hair, I am making a pie chart and the "Best Fit" function in access charts for form flat out doesnt work. Does anyone have any suggestions on how to get these labels from bunching up?
View 3 Replies
View Related
Jan 14, 2013
I have data in a chart over four groups that are just labeled A, B, C and D in the underlying data. The table wants to label the x-axis of the chart SumOfA, SumOfB, SumOfC, and SumOfD. Ideally I would like to drive these labels by text boxes on a form, but I can't even figure out how to change them manually. I got to the data table in the chart designer and changed them there, and they'd show as changed in design view, but then they weren't changed in report view.
View 5 Replies
View Related
Aug 27, 2014
How do I change the legend labels of a pivot chart form so that it doesn't show the words "sum of" in front of my description. I am using access 2007.
View 2 Replies
View Related
Sep 15, 2004
when i analyze my report in Excel, none of the data labels in my report header are copied across can i set this up so that they do.
Andy
View 1 Replies
View Related
Jul 3, 2014
My parameters are linked to a form and say:
[Forms]![FormName]![Field] or [Forms]![FormName]![Field] Is Null
Ordinarily this works fine in returning either the selected value or all values if left null.
I need to pull in data from a Crosstab query, which means setting my parameter labels to [Forms]![FormName]![Field].
The problem is that setting the parameter labels is conflicting with pulling all records if the form dropdown is left null.
If I keep my parameters simple and just say [Forms]![FormName]![Field] then the query works with the crosstab data, but I can't do that. I need to show any records if the dropdown is left null.
The crosstab data isn't specifically the problem but needing to set the parameter names seems to be
I think I may have found a workaround by labeling the column headings in the crosstab, which means I don't have to assign parameter labels
It would still be good to know if there's a way of making it work with the parameter labels but this will do for now...
View 7 Replies
View Related
Mar 22, 2006
Hi all,
I'm trying to create a chart in a form, this is not a problem, however, the chart types available are a bit limited compared to if i inserted a Microsoft Excel Chart object.
I'd do that except I'm trying to create a chart based on a query.
Is there a way to make the chart wizard use the Microsoft Excel Chart object as its chart creator so I have access to the chart types available in that object?
any assistance much appreciated.
thanks all.
regards
keji
View 1 Replies
View Related
Jun 28, 2015
I have a form with a chart , 2 textboxes for start date and end date and a button to filter the data( filter the data by date range) How do i continue from that? The chart isnt updating.
View 5 Replies
View Related
Aug 27, 2014
I am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID
FROM Case_review
WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then
Me.Label29.Visible = False
Me.Rpt_Clinical.Visible = True
Else
Me.Label29.Visible = True
Me.Rpt_Clinical.Visible = False
View 7 Replies
View Related
Dec 15, 2012
I need to create a Pivot Chart using the data from more than one table.
The main table has fields including 'Job name', 'task name' and 'hours worked'.
The second table (linked to the first by 'task name') has a field 'allocated hours'.
I would like to plot the 'total time worked' against 'allocated hours' (in a stacked bar style chart), in order to monitor time usage.
View 2 Replies
View Related
Sep 27, 2004
Colm and Baxter, you've been great helps to me so far, and I will include you in the special thanks in my programming credits. I ask your help once more-
My program tracks how many calls are received per day at the office. I have a report showing a chart (thank goodness for wizards ) that lists the calls per day. This all works fine, and I was extremely proud of myself for doing so. However, after thinking about it, I realized that after a while, my client might not care to see ALL of the calls per day ALL of the time, and might wish to see maybe a week's worth or a month's worth at a time. I was thinking I could solve this by using a form to enter "from" and "to" information, but I'm not quite sure how to apply this so it would work with my report.
Also, if I can get this to work, on this same form I would like to have an option field that the user can select so that the usual options (today, this week, this month, this year, all) require only a click, rather than having to figure out what days are in this week (a tedious task, I know, but we're going for efficiency here ) but they also have the option of seeing specific dates they want.
The fields that I'm using for this are very simple- tblCustomer.CallDate and tblCustomer.LeadType, where CallDate is just a date and LeadType is a string from a lookup table that is either "Call-in" (the one I'm tracking) or "In-field".
I know this sounds like a lot of coding, but I'm sure if you could get me started, I could figure out the rest myself. It's just that the way Access does dates is so confusing to me, and I have midterms coming up and not a lot of time to figure this out by myself from scratch. Anyways, thanks for your help in advance!
Jason
View 2 Replies
View Related
Apr 8, 2014
I have some data that I want to display in a chart:
Code:
Theme Type Count(Type)
Blah1 1 5
Blah1 2 5
Blah1 3 8
Blah2 1 1
Blah3 2 5
Blah3 3 10
Blah4 1 111
Blah4 2 222
Blah4 3 333
I want to display that query data in a Pie Chart, one chart for each theme with a section of pie for each Type (with the value of the count determining the size). Unfortunately my mind has gone blank. Everything I try does not appear correctly, some queries also require an repeated entry of the parameters but even if I do that it doesn't display correctly. I think I need to write another query to the format:
Code:
Theme Type1 Type2 Type3 Type4
Blah1 5 5 8 1
Blah2 1
Blah3 5 10
Blah4 111 222 333
Is that correct and does that make sense? If it isn't correct how else do I do it?
View 10 Replies
View Related
Sep 11, 2014
I have a chart in a form which gets its data from a cross-tab query. The chart was working fine and still is besides the fact the it is skipping the first row of data, or reading/treating it as a header. I had this problem before and the only way i could get around it was to re-create the charts. As there are many charts i want to avoid doing this again and find out why this is happening to prevent it happening again.
View 6 Replies
View Related
Oct 27, 2013
I have a number of charts that correspond to form fields. Once the fields are filled out and the form is saved I want the data automatically to update in the chart. I tried inserting a button to allow the user to manually do it, but it says that it is unavailable. The charts update when i click refresh, however I dont want the user to have to do this.
View 1 Replies
View Related
Mar 11, 2014
I created a table called weld_performance. it consist weld_id, weld_prod, total_rt, accepted, rejected, and rejection rate. from weld_prod until rejection rate, the type data is number. the rejection rate field size is Single, and Format is Percent.
Based on this table, i create a query called query1. and based on this query1, i create a chart. please see attachment pic001. as you can see the data label on the chart is showing 0.66667. but in my query1, the value is 67%. if i click the value (67%) it's change to 0.66667.
So I guess, the chart is read the 0.66667 value from the query. now what i want to ask is, how can my chart data label is shown 67% instead of 0.66667 ??
Environment: Windows 7, Ms. Access 2010
View 2 Replies
View Related
Aug 8, 2013
I am using Access 2007 with Windows XP. I have a scatter chart embedded in a form that is plotting data from a subform with a trendline that is extracted and used on the form for calculations. After having the table set up correctly and running fine, I closed the database and then reopened it to have the table plotting the data in a made up 1 to 1 relationship rather than what is in the datasheet. The only way I have been able to fix this error is to change the chart type to something else then back to a scatter plot and remake the trendline. Why this is happening and how to prevent it?
View 1 Replies
View Related
May 18, 2014
I have a small clinic database. I've got tblAppointments to show AppointmentID and AppointmentDate among various other data, but only the dates matter for what I'm trying to achieve.
I'm trying to show a chart on a report that shows the number of appointments by months for this year and previous year. How can I do this...without using SQL, hopefully?
Here's what I tried: I made a cross-tab query to successfully show the years 2013 and 2014 in the rows, months in the columns, and number of appointments as values. But then, I didn't know how to graph it to compare the number of appointments for the two years by months.
View 5 Replies
View Related
Jul 22, 2013
I have created a chart report, but for some reasons, it only shows Sample data (East, West, North, 1st Qtr, 2nd Qtr, 3th Qtr, 4th Qtr etc). It is in Design View. If I do Print Preview, it looks fine.
How to have the Chart properly displayed in Design View?
View 4 Replies
View Related
May 5, 2015
I have a simple line chart plotting price against date.
I would like to plot a secondary line on this chart from an array of data that I calculate. I've searched hi and low but can't seem to find a way of doing this.
The closest I've found is from this:-
[URL]
I can create my array of data but I can't seem to get it to work and think it may be for pivot charts....which access 2013 can't do anymore.
how to plot multiple data sets on the same graph in Access 2013.
View 9 Replies
View Related
Jun 18, 2015
So I'm new to Access, and I am trying use a query that can be referred to by a chart. So the idea is that I use the query to select data only from the date range that the user chooses on the home screen of the database for their chart (using the command Between [Forms]![Home Screen]![From] And [Forms]![Home Screen]![to])..Although it has been working fine for charts that only have two parameters, when I attempted to make a line graph that sorts by 3 parameters (i.e. date and amount for different types of something), it stops. I get the message that "The Microsoft Office Access database does not recognize [Forms]![Home Screen]![From] as a valid field name or expression" or something to that effect.I'd rather not remove the whole specification created by using the dates from the home screen, as it has been working fine on all other aspects of my charts and reports.
View 9 Replies
View Related
Jul 29, 2013
Is it possible to update the data for a chart graph in a word document from Access using VBA?
View 4 Replies
View Related
Aug 12, 2015
I have a graph chart and my row source type is a Query. So I retrieved data from the Query that I built.
However , I want to get the data from the uploaded excel file.
I have a form that will prompt user in the beginning to upload the excel file and replaced the old table in Access- "CrossSystemData"
Basically , I want to pull data from Excel file , Run the query(Data from excel file) then excute to "display a chart based on my query" ... Is it possible ?
Query SQL: "PolyWrongRegInsCount"
Code:
SELECT GROUPING.INSTITUTION, Count(*) AS NO_OF_GROUP
FROM (SELECT DISTINCT CATEGORY, GROUP_NO, INSTITUTION, IIF(Left(INSTITUTION,1)="P","POLYCLINIC","HOSPITAL") AS INS_TYPE FROM CrossSystemData WHERE INSTITUTION NOT LIKE "*UNKNOWN*") AS GROUPING
WHERE (((GROUPING.CATEGORY)="WRONG REG") AND ((GROUPING.INS_TYPE)="POLYCLINIC"))
GROUP BY GROUPING.INSTITUTION;
My Chart SQL :
Code:
SELECT PolyWrongRegInsCount.[INSTITUTION], PolyWrongRegInsCount.[NO_OF_GROUP]
FROM PolyWrongRegInsCount;
View 3 Replies
View Related
Oct 11, 2004
I have a field in my database that list the number of personnel folders a person has, I would like to print labels for each folder for that person. For example, if a person has 4 folders I would like to print 4 of the same label at once by clicking the command button I have set up to print the label. The default is set to 1 label but I need the number of labels to change according to the number of folders listed. Can this be done and if so how?I will be using Avery 4031-20 labels
View 2 Replies
View Related
May 24, 2005
how can i dim label that i wtn it to be disable...but visible.
i know i can do it with command button but i dont know how can i do it with label.
View 6 Replies
View Related
Aug 11, 2005
Greetings,
Have an address list with over 600 names, and I need to create mailing labels.
Have First Name, Last Name fields, with city, state zip. BUT...
There is also a field called SPOUSE. This field is NOT always populated.
I need a query that I'll use to create the mailing labels that will;
Have the FIRST NAME SPOUSE NAME LAST NAME
If the SPOUSE field is blank, I need the query to filter that out, so that the address lable will only show First Name and Last Name, without a blank space in between.
Also need the query to put the '&' sign in IF there is a spouse.
Example 1: John & Jane Doe
Example 2: John Doe
Any assistance will be appreciated!
Bob in Indy
View 4 Replies
View Related
