I have an Orders table and an Inventory table. Whenever I enter a new order and type in the Item # and Quantity ordered, I would like the Inventory amount in the other table to automatically be reduced by that amount. Possible?
EDIT: Okay, so I've figured out that this needs to be done in a query, but my expression isn't coming out right. I tried this:
QUANT: [Inventory]![QuantityOnHand]-[Orders]![Quantity], but it simply calculates the new inventory based on the original inventory number. In other words, if I have 100 on hand, every new order just subtracts itself from 100, and not from the result of the previous transactions.
I'm a new user of Access and I'm required to input a survey into access. The data collected is being analyzed afterwards and therefore there cannot be any alpha content in the original table so I assigned multiple choice options numbers to correspond to the answers. In form view however I need the drop down boxes to spell out the answers, not just the numbers so the interviewer can read them out, I've seen this done on other similar surveys..I also tried going into form view and editing the drop down choices but that changes the table values.
Currently, I have 10 Users running a front end form that connect to back end data where they add to current records and eventually check that the record is complete.
I also have an "Apply Filter" button on the right hand side of the form that allows the user to apply filters to the records to show specific data that is not complete.
I am currently hearing that while the user is working, whether they apply filter or not, it seems as though all of a sudden, all of their completed work dissapears from their recordset hence not allowing them to go back to make changes to it if needed. I can only conclude that when a different user clicks apply filter, all users are affect some how... here are some examples of the code for the filter:
Code: Select Case [cboFilterValues] ' Where the user selects a filter parameter from a dropdown Case "All Data" strSQL = "SELECT * " & _ "FROM [Data Table] " & _ "WHERE [Complete] = No
Then it does:
Code: Me.RecordSource = strSQL
I am basically trying to find a way where only the user wanting to view the filter is affected... FYI, the other users arent actually seeing all the filters from the other user filter choice, they simply loose all their completed work from their form.
Any way to use multiple count functions in a query with their own individual filters without affect the others?
For example:
SELECT [E&I Table].System, [E&I Table].DeleteRecord, Count([E&I Table].[Status#1]) AS [CountOfStatus#1], Count([E&I Table].[Status#2]) AS [CountOfStatus#2] FROM [E&I Table] WHERE ((([E&I Table].[Status#1]) Like "ITR Rcv'd by QA" Or ([E&I Table].[Status#1]) Like "Completed" Or ([E&I Table].[Status#1]) Like "Ready for T/O" Or ([E&I Table].[Status#1]) Like "Reviewed by JVV") AND (([E&I Table].[Status#2]) Like "ITR Rcv'd by QA" Or ([E&I Table].[Status#2]) Like "Completed" Or ([E&I Table].[Status#2]) Like "Ready for T/O" Or ([E&I Table].[Status#2]) Like "Reviewed by JVV")) GROUP BY [E&I Table].System, [E&I Table].DeleteRecord;
I am trying to count in each column of the E&I table with criteria using WHERE but the problem is when you have more than 1 WHERE it affects the other columns as well... tried a bunch of different ways and I am now having to create seperate Queries than combine them using another Query...
I have a table which I use to track all the equipment and subsections of the equipment in our factory. Column1 is EntryID (Primary Key). Column2 is the machine name. Column3 is the subsection of the particular machine in Column2. There is 30 different machines and each machine might have 20 different subsections. 600 line table. Call this tbl_Master_list
I have a separate table which I intend to use to track all faults on machines in the plant. To aid the entry of this information by maintenance staff I was trying to help with the data entry as follows.
Step 1 - Maintenance staff are selecting the Machine, this is coming out of tbl_Master_list. The combo box should only show the list of machines and not the 600 entries in the list, ie there are repetitions because of each subsection. I want them to see the list of machines.
Step 2 - Once Step 1 is done I want the next combo box to only show the subsections of the machine selected in Step 1.
There are two tabs named Table1 and Table2. In actual there are two tables in Access database named Table1 and Table2. How the data is stored in ACcess tables, I have made two tabs in excel workbook. Now I want Access VBA code that will check if data in Reference field of Table1 matches with any of the data in Reference field of Table2.
If it matches then change the status of the corresponding record of Table2 with either "Withdrawn","Obsolete" or "Updated". SO it depends upon which field out of "WIthdrawn","Obsolete" and "Updated" in Table1 stores "Y". At a time only one of them will have "Y" and rest of two fields will have "N" as shown in the sheets.
As in the example, now Reference "R566" of Table1 matches with Table2 Reference so the status field in Table2 for that record will be "WithDrawn".
I would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected Total Envelopes=sum(Envelopes) for date selected Total Documents=sum(Cases) for date selected Total Pages=sum(Pages) for date selected
I have a database that I import data from an excel spreadsheet into multiple times daily. The table that this data is imported into has several key fields that if the data already exisits in the table, and I attempt to import data that is the same except for one or more of the key fields is different. At this time the database it creates a different record. I am trying to get the database to overwrite the data in the database.
My question is this: I have a table where I'm entering employees' hours worked. Basically, it's something like this:
ID WorkerNumberDateworkedTimeStartTimeEnded 121/2/201310:00:00 AM3:00:00 PM 221/3/20132:00:00 AM11:00:00 AM 321/4/201312:15:00 AM11:30:00 AM 421/5/201310:25:00 PM11:00:00 AM 531/2/201311:00:00 AM3:30:00 PM 631/3/201312:00:00 PM10:00:00 PM 731/10/20137:00:00 AM4:00:00 PM
I have a query that (easily) determines how many hours an employee has worked on any given day. What I can't figure out at all, is how to write a query that can figure out how much time an employee had off in between shifts.
Thus far I'm able to run a query that separates this main table into individual workers by their id numbers, but can't figure out how to determine time off between shifts - as the last hour worked one day, and the first hour worked the next day are on two different lines (they are two different table entries).
I am trying to use SQL to run queries in our access database in order to (hopefully) speed things up. I'm trying to create code that basically takes data from one table and inserts it into another whilst doing calculations on the data.
However I can't get past this:
Code: Private Sub Test_Click() Dim strSQL As String
I have a table and a simple query that pulls results from the table. Nothing too crazy. But, if I were to go in and change some of the data/values in the query results it will change the respective data in the table. I know that this cannot be right. What do I have to do to either prevent the ability to change query results and/or prevent any changes in the query from altering the original data in the table.
:confused: Hi I have some 100 questions for which user must answer by selecting any of the options provided using option buttons.
As i cant fit all 100 qtns in one form am splitting it into soem 10 forms.
User answers the qtns in 1st form and clicks on next button to goto to nxt form thn agn he answers the qtns in tht form and clicks on next button to goto nxt form..so on.. until he answers all the qtns in the last form.
I want to transfer the answers selected from 1st form till the last one..where all the answers are stored in one table whn a submit button is clicked.
please let me kno ASAP if thr is anyway i can do it. thnk in advance
Hi I have some 100 questions for which user must answer by selecting any of the options provided using option buttons.
As i cant fit all 100 qtns in one form am splitting it into soem 10 forms.
User answers the qtns in 1st form and clicks on next button to goto to nxt form thn agn he answers the qtns in tht form and clicks on next button to goto nxt form..so on.. until he answers all the qtns in the last form.
I want to transfer the answers selected from 1st form till the last one..where all the answers are stored in one table whn a submit button is clicked.
please let me kno ASAP if thr is anyway i can do it. thnk in advance
I am new to access (2007), There is a datasheet in the form where we enter our time in/time out. We enter data using the form but that is one data at a time only. So I tried to paste multiple data (records) from excel into the access table. After pasting into the table, the data appears in the query, but not in the form.When I go to the form to check if the data I pasted into the table will appear in the form's datasheet...some data appears but some does not.
I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
Hi, I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
When the value "X - DISCONNECTED" is selected in the form I want the record to be removed from its existing table and sent to a new table which keeps all the "X - DISCONNECTED" records together.
Any ideas would be greatly appreciated. How would this be coded?
I have one DB that is used for creating/storing customer ID's, and another DB that is used for creating/storing job information for customers.I have linked the table from the customer DB to the job DB.
There is a table in the job database that holds customer name and ID, and some VBA that generates unique job codes.
Is it possible to have the data from the linked table automatically update into the existing table?
Is there a way to append a pivot table to a table or possibly make a query based on a pivot table? I need to get a count of Part Numbers and I need the average price for all these parts. Additionally I want to ignore a count of less than 3.
Also I am having trouble filtering on the count in the pivot table... haha, so I was gonna Query on it later on.
How to update data from one table to another table using form.
I have data coming from design team in Database 1 and using form i want search data and assign the job to a person and store it in the database with his name. I have to do this because database from design team is read only.
I have an "order details" table that needs to populate a field called "Voucher" with data from another table called "codes". The "codes" table also has a true/false field called "allocated" because once allocated the code cannot be re-used.
I am trying to work out how to automatically allocate the next unallocated code in the "codes" table to each record in the "order details" table when that order details record has a DiscountID of "92".
Order Details Table Fields and conditions/criteria: ID - primary key DiscountID - only when the DiscountID = 92 Voucher - only populated when Discount ID = 92
Codes table Fields and conditions/criteria: ID - primary key code = text field with a code like "einstein01", "einstein02" Allocated = False
Is there a way to put the next available code into the order details record then mark that code as allocated in the codes table. Then, move on to the next order details record that has a discountID = 92, input the next unallocated code and mark that code etc. etc.
Ideally, I would like to do this to happen via an event when the Order forms button "Close" is clicked.