Data Entered In Form To Record Source
Aug 26, 2005
I have a form where users enter data in various ways - combo boxes with drop down selections and text boxes where users manually enter some data. I also have several text boxes that return "answers" based on calculations from user entries mentioned above. The form is bound to a table where all the entered data is stored. I'm having trouble saving the calculated information to the bound table. It's easy in all the non-calced boxes, I just put the column name of the bound table in the control source, but in the calculated fields, I already have the formula in the control source. How can I identify the proper column to save the data in this case.
Thanks!
View Replies
ADVERTISEMENT
Jul 30, 2012
I am fairly new to access but so far I have been able to get what i need from it, until now. I am trying to find a way of comparing two sets of data to find out an employee's average productivty.
Table 1 -Hours Worked (by day)
- contains 'name' 'date' and '# of hours' worked
- an employee would enter the hours here on a daily basis
Table 2 - Contracts Keyed (by month)
- contains the number of contracts worked that is derived from seperate system
- this is entered on a monthly basis (so for example: John keyed 30 contracts for the month of January)
- the system i am pulling this info from does not have the ability to pull a daily count of contract per employee, only a range of dates and it then provides the sum for that range (unless I ran a query for each day, for each employee which would take me hours)
- employees dont have access to this system to enter their own # of contracts keyed on a daily basis.
- for entry, so far i have just been putting the first of the month and then the # of contracts.
In a nutshell, this is the calculation I am trying to create:
(Sum of "# of hours" for the month) / (total "# of contracts keyed" for the month) = employees average hourly productivity.
I have tried to do this with various types of queries and reports but with no luck, I get a prompt saying that access can't compare the 2 fields.
Is there a way to compare the data that is entered daily with the data i would enter monthly?
View 2 Replies
View Related
Oct 23, 2012
I have an access database where I have added a new field, but I cannot find the name of that field in the Control Source list to link it from where the data will be entered. It IS in the table, too. Why in the world is it not working.
A user enters a New Job Opening into the form for New Job Opening. Later, a user enters a New Interview in the New Interview form.... when they enter the job opening number into the job opening number field, it auto-populates the other information previously entered into the New Job Opening form into an area within the New Interview form. I have made sure the new field is in the table for the New Job Openings table.
View 6 Replies
View Related
Oct 1, 2005
Hello, I have a program/database that I'm building in Access 2003, It has new client/bid entry form that has many text boxes for instance: Client, address, Phone numbers, Date etc. These text boxes are actually populating the same text fields in the PrimaryBid_Master form.
My question is every time I fill out the client entry new bid form and then exit to the PrimaryBid _Master form it defaults to the very first record entered, and I would like it to default to the last record entered, The record I just got done entering into the new client bid form, this would save me from having to filter/find it every time I enter a new bid/client, Is this possible and if so Can you describe to me how I can have my program do this?
Thanks--Chuck I really appreciate any help/suggestions.
View 3 Replies
View Related
Sep 11, 2007
I have a form with several tabs on it, where the user enters various info.. I want to have the user hit the save button and have all info saved to a single table. Is there an easy way to do this. Please excuse my ignorance but I am fairly new to Access. Thanks in advance!
View 9 Replies
View Related
Oct 18, 2004
Hi all..
This is my first question posted on this site. I have created a survey with questions to be answered. The database is already populated with records of the people's names who were getting the survey. What I need is when the data entry clerk brings up the customer's name on the form, is that they are forced to enter the surveys answers for certain questions before they click the "Save" button. The answers are set up as radio buttons on the form (ie Less than 6 Months, 6 Months, 8 months and 1 Year).
Not sure if a Before or AfterUpdate macro is needed?
Any suggestions would be appreciated. Please email me directly if you have code.
Thank you
View 2 Replies
View Related
Oct 29, 2006
Hello again,
I have three questions this time 'round:
1. I'm in need of some way of preventing a user from opening form B unless he has entered information in form A.
Right now it is possible to open form B without entering data in form A (form A being the date/time info and form B being the case technical info) due to which a record is created for clientnr 0 (which should be a non existing client). Querying for clientnr 0 from time to time and deleting those records is easy enough, but who knows what kind of relevant data could be stored accidentally in a record that doesn't belong there.
This happens by the way, even though referential integrity is enforced throughout the dbase. Maybe I should say, because of that. I want to keep it that way of course to prevent orphans roaming around. But having orphans for clientnr. 0 is also not a good idea.
2. What is the wiser thing to do: keep all information concerning one case for one client (date/time info per case, techinfo per case, maybe even products sold info per case, payment info per case) in one table and have the data needed for each thing entered in seperate forms, or have all data split up into seperate tables like I have now. One for clients, one for dates and times, one for the technical info for that case etc.... ?
It is starting to seem a bit ehrm... useless to have all that data for one case floating around seperate tables. I don't know... it seems so much more complex (having to create multiple relations, multiple PK's per table etc.).
Where do I draw the line? For example the image attached (relationship2.jpg): now I have one PK in the table holding the clients (clientnr), two PK's in the table holding the case date/time info (clientnr and casenumberdatetimeinfo), three PK's in the table holding the techinfo (clientnr, casenumberdatetimeinfo and casetechinfonr). And what's next? Four PK's in the table holding the sold productsinfo? Five PK's in the table holding the invoice info? And what about the relations between those tables? Right now I can still comprehend.... but when I start thinking ahead, I'm starting to get dizzy. So some advice on this would really be highly appreciated.
3. Which build up of the relations between the tables in the dbase is better? The one in relationship.jpg or the one in relationship2.jpg?
View 8 Replies
View Related
Feb 5, 2015
I am not sure where this thread should be in forms or queries. I have database which has 3 linked tables by ID in each table. I have built a query on the 3 tables, then created the form.
Now when I enter data on the form and save it, when I open up the said form again , the data is not there. Yet the data is in both the table and query
If I only use 1 table, then there is no problem. The record source for the form is the query, and the query uses the 3 tables.
View 14 Replies
View Related
Aug 3, 2015
I have a form that the user enters employees daily duties. I have code to run sql after the BoxNum field has data in it. I want it to look at the BoxNum field and the dropdown box for the task to see if the entered box number has already been completed for the task selected on the form. Here is what my code looks like now. The code runs but gives me the msgbox no matter if it is a made up box number and I also get a syntax error 3075.
Code:
Private Sub Text13_BeforeUpdate(Cancel As Integer)
Dim rs As DAO.Recordset
Dim strSQL As String
[code]....
View 6 Replies
View Related
Aug 4, 2012
How do i save a record as soon as text is entered into the textbox in a form?I need it to save without moving on to the next form without having to click a button
Code:
If Me.Dirty Then Me.Dirty = False
but it doesnt seem to work
View 3 Replies
View Related
Aug 3, 2006
Can someone go through my forms and help me figure out why I cannot submit the entered data. Whenever I try to test my system and enter in inspection information I get an error that says....
"The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data and try again."
Steps:
1.) Type the given sample account number in the blue box
2.) Click "Search Acct #" button
3.) Click "Test" button
4.) Enter random info on the test form
5.) Read error message
6.) Help Ken_C :D
Thanks in advance :cool:
View 4 Replies
View Related
Jan 7, 2015
I am developing a form where students have to enter their ID number but I want my form to check through a table of students and their IDs and flag up if the ID number does not exist in the table.
View 10 Replies
View Related
Dec 16, 2013
I have a parameter form I used to enter data for a query. I want it to clear any previous data entered when it opens. I have tried the below without success. I also have the fields defaults set as "" and the form set at yes on data entry.
Private Sub Form_Open(Cancel As Integer)
Me.BldgCmb.Value = ""
Me.StateCmb.Value = ""
Me.CityCmb.Value = ""
Me.AddCmb.Value = ""
End Sub
View 3 Replies
View Related
Nov 16, 2005
I have a main form that has 10 sub forms Each sub form’s record source is link to a different Query.
It takes more then a minute to open the form, (because it’s running the query for all sub forms). So I changed the sub forms source to SELECT * FROM tblTest WHERE false;
I also changed the main form. When the button on the main form is clicked, it’s adding the following:
Me.SubMySub.Form.RecordSource = "select * from qMyQuery"
Me. SubMySub.Form.Requery
However, after I close the main form, the sub form’s record source stays linked to
SELECT * FROM qMyQuery;
And will take the same long time again to open the main form.
Does anyone have any solution?
View 7 Replies
View Related
Feb 8, 2005
Hi all,
I have Form F_CashSalesHead with a subform F_CashSalesInvFoot with one-2-many relationship on their tables. Subform contains a checkbox field that I use to lock the record set (On a command button click it runs one update query to add value 1 to each checkbox to make Enable=False all the records of current invoice on the form).
One-2-many relation ship is made on InvNum field in both tables.
When I open F_CashSalesHead form, bcz of some code line I wrote on On Load event of F_CashSalesHead , at the beginning it give massage how many invoices are pending to lock and would you like to see. If click “Yes” to see list, it opens a small form that called F_Count_Unlocked_Invoices showing invoice numbers and unmarked checkbox which is pending to lock. This small form is based on following query,
SELECT DISTINCTROW T_CashSalesInvFoot.InvNum, T_CashSalesInvFoot.CashSalesCustomerName, Sum(T_CashSalesInvFoot.Lock_Cash_Inv) AS [Sum Of Lock_Cash_Inv]
FROM T_CashSalesInvFoot
GROUP BY T_CashSalesInvFoot.InvNum, T_CashSalesInvFoot.CashSalesCustomerName
HAVING (((Sum(T_CashSalesInvFoot.Lock_Cash_Inv))=0));
This works fine.
What I am looking for is, I want to use the same F_Count_Unlocked_Invoices form for Credit Sales invoice also with the same trick. Because I don’t want to create another same form and write code that help to increase size of db.
Can it be done just by changing record source of form F_Count_Unlocked_Invoices? Or what is the way to do it?
With kind regards,
Ashfaque
View 2 Replies
View Related
May 17, 2005
Heya. I hate posting yet another cascading query but I just poured through the first 40 bits and couldn't find something similar.
Basically, I seem to have an errored idea in how to effectively used cascading boxes on a larger form-wide scale.
Basically I have a form with an unbound combobox in the form header: cboSchool
The detail section should only have two fields, StudentID (txtStudentID) and a boolean (bolOT) both of which exist in a specific table source (tblStudents). StudentID is a locked field.
What I would like to do is only have the StudentID's available that are valid for the school. I attempted using a query in the record source that would reference cboSchool but I keep ending up with blank forms. (There's a string of queries that link the schools found in cboSchools to StudentID)
Any ideas?
~Chad
View 5 Replies
View Related
Jan 10, 2006
Hello,
I'm having a strange problem and was wondering if anyone can help me out. I have a form that is for inputting and modifying data in one table. It used to work when you opened the form you would see x amount of records. Now it's opening to 1 blank record. If you hit filter it fliters like 1700 records and then when you unclick it, you get the entire 10000 records. I thought it had something to do with the Record Source in the properties but when I fixed that it still didn't work. Any ideas?
Thank you!
View 2 Replies
View Related
Aug 31, 2004
I have 2 forms. On form1, the record source is a query. From form2, I need to iterate through the recordset from form1 and perform some action. How do I access the recordset from form1?
Thanks in Advance,
-jnoody
View 1 Replies
View Related
Jun 19, 2014
This code loads a new subform in the frame. It then scopies a value to an input field but then i need to set the record source and display the data. This latest pasrt does not work.I've been trying for some time now by changing the part before recordsource but no luck.
Code:
gekozenwo = Me.Keuzelijst0
Forms!switchboard.subfrmWindow.SourceObject = "frmInformation"
Dim frm As Form
Set frm = Forms!switchboard.subfrmWindow.Form
frm.DataEntry = True
Forms!switchboard.subfrmWindow.Form!Tekst33 = gekozenwo
MsgBox gekozenwo
frm.RecordSource = "SELECT * , [orders_maint_detail]![woisnr] & ' / ' & [orders_maint_detail]![Ordernummer] AS Expr1 " _
& "FROM orders_maint_detail " _
& "WHERE (((orders_maint_detail.woisnr)='" & gekozenwo & "'));"
Me.Requery
wonr = gekozenwo
View 2 Replies
View Related
Sep 19, 2005
I have an unbound form with three tabs. On each tab there is a sub form. Each tab is a search form and each sub is a results returned. I have made everything unbound and set the sub form recordsource and its controls control souce on afterupdate of the main form search criteria. Works fine except for after some use the db decides the sub forms are not unbound and sets the record source and control sources.
I'm trying to do a
Me.PollingPlacesResults.Form.RecordSource = ""
Me!PollingPlacesResults!PollID.ControlSource = ""
but this does not seem to work in actualy removeing the record source and control source.
View 14 Replies
View Related
Dec 20, 2006
I am attempting my first access database which tracks blood components in our medical facility. When a component is issued to a patient there is a button to push which links to a report that runs a query. The user must enter the unique key for the component at a promt, which ensures the report generated will be for that component only. My question is if there is a way to cpture and use that key automatically when pressing the button. If I need to clarify something, please let me know--I may not have the Access developer lingo down yet...
View 2 Replies
View Related
Aug 6, 2014
I have a main form titled "projects" with a subform titled "inventory". They are linked by two fields "project" and "fiscal year" with a one to many relationship. These fields are also the primary keys in the main form. I also have the referential integrity option activated.
Whenever data is entered in the subform inventory, it duplicates the main form and all the other subforms linked to the main form. (I have about 11 other subforms linked to the main form). So if I enter 2 records in the inventory tab, there will be 2 records for the same project and fiscal year in the subform and all the other linked subforms with the same data, so it is almost like it is seeing the inventory subform as the main form. I have tried deleting the duplicate record from the main form, then it deletes the 2nd entry of the subform. I have attached a pdf with a print screen of the 2 duplicate records with the same fiscal year and project name.
I have another form called Notes that has a similar relationship, but doesn't have this problem. I think it might have something to do with the conversion. I originally created the database with Access 97 and we are now using Access 2007. Am I missing something that needs to be done in Access 2007 to link the 2 forms, so I can enter records in the subform without duplications?
Also, the database is split so there is a back end and front end. I have all the tables and relationships set in the back end.
View 5 Replies
View Related
Jan 17, 2015
I want to check if data entered in a form field is existed
The form is bounded to a table
I used this code
If DLookup("Telegram_Number", "tbl_Violation_Of_Building", "Telegram_Number Like " & Forms!frm_Add_Violation_Building!Telegram_Number) Then
MsgBox ("number existed")
Me.Telegram_Number = ""
Else
End If
everything is ok but if the data is existed the database show the message and clear the field but i'm getting a Run-time error
'-2147352567(80020009)': the macro or function set to the beforeupdate or validationRule property for this field is preventing [ISF] from saving the data in the field
I guess the problem because the form is bounded to a table so he will save automatically
My solution is to unbound the fields and save the data via vba but is there any solution with a bounded form???
View 3 Replies
View Related
Feb 23, 2005
I have Form A that has a combo box and a "Submit" button. When the user clicks on the Submit button it needs to open Form B. Recordsource of this Form B is "Query B"
Item selected on the combo box becomes the criteria for "Query B and Form B needs to be opened based on that criteria.
What is the easiest and fastest way (no dlookups please!) to do this?
If an illustration is possible through an example that will be wonderful.
Thanks in Advance.
View 1 Replies
View Related
Mar 26, 2005
I am making a master form for three tables which ultimately form a hierarchy. I am getting all the fields from each table onto one form. By default the record source would be made up of an INNER JOIN such as below
SELECT PERSON.first_name, PERSON.country, PERSON.last_name, PERSON.street, PERSON.area, PERSON.city, PERSON.telephone, CONTRIBUTOR.registration_date, CONTRIBUTOR.fav_category, MUJAHED.profession FROM (PERSON INNER JOIN CONTRIBUTOR ON PERSON.id=CONTRIBUTOR.id) INNER JOIN MUJAHED ON CONTRIBUTOR.id=MUJAHED.id;
I'm trying to change the record source to match using the where clause instead. However the following allows me to view but not add a new record
SELECT PERSON.first_name, PERSON.country, PERSON.last_name, PERSON.street, PERSON.area, PERSON.city, PERSON.telephone, CONTRIBUTOR.registration_date, CONTRIBUTOR.fav_category, MUJAHED.profession
FROM PERSON, CONTRIBUTOR, MUJAHED
WHERE (PERSON.id = CONTRIBUTOR.id) AND (CONTRIBUTOR.id = MUJAHED.id);
A tip or guideline on how I can correct this will be appreciated.
Regards
View 1 Replies
View Related
Sep 22, 2005
I'm looking to change the record source of a report and then print the report depending on what button the user clicks on.
Is there some way to do this?
View 8 Replies
View Related
