I currently have an inventory system on database and my customers can access this by clicking a link on the homepage, which in turn, pops up a search form and results table. When they enter the item number it returns the qty. available, without a problem.
The problem I am having is this; I would like to have the search form on the same page they are looking at (no pop-ups). I figure the inventory system will get used more often this way. BUT when I went ahead and tried to put the search form on the page it seemed to work out ok, except that when you click submit (to start the query) it sends me to my 404 page.
When the search form was a pop-up, it just returned the results to the same page. Is there any way that I can get the search form on the same page they would be looking at, to avoid any further windows for them to open and close??
Also, to advance this a bit, is there any way that I can have the database results posted to the page without a search form? Just posted based on the item number in the URL??
Thank you for all the help, I did a search in the forum and wasn't able to find enough information to get the job done. Hope you can help.
I have created a table with name "Main". It consists of fields ID, Author, Title, Abstract, Page and Published.
I have created a form named "MFORM" with text boxes Author, Title, Abstract, Page and Published,and then I created a search and clear parameters buttons below the text box.
Then I dragged my Search Query into the bottom of my form MFORM and named it as "All Results".
When I click on search then the results are displayed in the new tab instead of bottom of my main form in Search query.
If I enter author name as Mike and then click on search button then results should display all the details related to Mike on the bottom of my form.
All Results [At the Bottom of my page]
Should display all the details related to Mike.
I had attached my database. I just need the search results at the bottom of my main form in stead of displaying in new tab.
I have built a custom search form in a MS Access 2010 database so that users can find specific records to edit. After entering the search criteria and hitting a Search button, another form opens up that shows the search results. This second form includes a command button for generating a report of the search results.
Right now, the custom search form and the search results form are both working properly, but the search results report is showing every record in the database instead of just the search results. This is true whether I access the report via the command button in the form or the navigation pane. I'm not sure if I need to correct my VBA code or the report's properties.
I have a form that has a subform on it. The main form shows a category of furniture and has custom navigation buttons and a search text box for asset numbers and command button that runs the search. The subform shows the asset numbers associated with that furniture category, sometimes there is only one asset number, in other cases there could be 60. There is a scroll bar to scroll through the asset numbers when there are too many to see in the initial window.
The buttons all work as they should except when I search for an asset number that is part of a category that has too many asset numbers to show in the main window. When this happens the "previous" and "next" navigation buttons do not take you to the previous or next record. All of the other buttons on the form work though - you can go to the first, or the last record, and you can search for a new asset.This is the code for the search:
Code:
Private Sub cmdAssetSearch_Click() Dim rs As Object If IsNull(Me.TextAsset) Or Me.TextAsset = "" Then MsgBox "Please type in an asset number to search for.", vbOKOnly Me.TextAsset.SetFocus
[code]....
I've also attached a picture of what I mean when I say there are more asset numbers than what the window shows.
I was wondering if someone could try and connect my database to the web. I would like to view the names of the CDs in her collection over the Internet.
I have a scenario at work I need some help with. I'm just checking to make sure it is possible before I dive further into it.
We need a database for approximately 40 people to access at one time. They don't really need to access the database itself just be able to update it.
The question that was posed to me was this: Can we use an HTML page to update the database?
This will not be run through SQL or IIS or anything of that nature. It will just be an HTML page that is accessed through a users folder. On the HTML page will be the input boxes and a submit and reset button.
I made a data access page, but I really don't want the users to be able to go through the previous entries. I also wasn't sure if more than one person could be accessing the page at once.
Is a simple form page with a submit button possible not running on a web server?
I am very new to access and have a question which I think is very easy to answer. What I have is an access file with a listing of companies, their contacts and what services we provide for them. (each company/client/service is listed in a row with each new set of information on the row below it).
What I am looking to do it to create a data access page that anyone in our office can view. I want the access page to have a text box where they can type in the name of the company, then click a 'search' button. That will then display the results in a box below everything. The results would be the contact and the services (there are other columns in the datasource as well, but I didn't list them).
If anyone can shed some light onto my problem it would be most appreciated!
I want to create a main menu page for my database. I have tried the Navigation form and obviously I am doing something wrong....because the tabs won't open the forms. We have Access 2010 at work and I would like to create something similar to this:
Cardinal Rap - Main Menu
[button] Input Monthly data This button would take me to another screen that would list the tables for appropriation, expenditures and revenue, each with their own respective button
[button] Reports This button would take me to another screen that would would list the reports available each with their own respective button
[button] Monthly reconciliations
This button would take me to another screen that would list the tables necessary for my monthly reconciliations each with their own respective button that open that table.
The tabs in the Navigation form don't seem to do anything.
***Updated*** Search/Email Results has been solved....Working out some bugs and trying to add a Print Address Labels option to the search. The post at Date Nov. 5, 11:4x is the new post with updated info. Thanks! ***Updated***
I have read a ton in the last hour or so on this subject and gained a little insite, but since I have no Access programing experience I am still pretty lost. However, I have programing experience in other areas, so if it requires some macros, I shouldn't have too much trouble. /crossfingers
I have put together a database for the business I work for that contains around 3,000 contacts. I am trying to figure out a way to do a search that will search out specific contacts and email them a newsletter. Their email address is included in their contact information. So I assume I need a way to search for a specific criteria, grab their email address, and then email them with either an attached document, a prior written email, or have included the newsletter in the body of the code to add into the created email.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.?? (Actually I would also like any State that continues to a next page to not just have the state name but something like " Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska Ancorage Prudo Bay
California Whittier Anaheim
Colorado ------------------------Page Break --------------------------------- Denver Pueblo Colorado Springs
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Call me lazy... I'm using FrontPage Database results wizards to retrieve data from Access. I have a cookie containing a number I'd like to insert in a custom query. Whenever the page opens, I want the query to run using the value in the cookie. I haven't been able to figure out how to transfer the cookie value into somewthing the FP webbot will accept in the query. Any ideas??
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
I am building a prototype database and currently has two records in it (I know for certain they are not duplicates). Attached is the relationship and below is the query. The query keeps returning the correct results but twice. (Duplicate results.)
SELECT DISTINCT WeekdayName([Weekdaynumber],False,1) AS Weekday, [Master Data].Date, [Master Data].Machine, [Master Data].Shift, [Master Data Query].[Master Data_Product Code], [Master Data Query].[Cases/Pallet], [Master Data].[Expected Pallets to Produce], [Master Data].[Actual Pallets Produced], [Master Data].[Damage (Units)],
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer) If Page = Pages Then Me.[TextBoxName].Visible = True Else Me.[TextBoxName].Visible = False End If End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer) Me.PageFooterSection.Visible = (Me.[Page] = 1) End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have a question where I need to effectively invert the results of a select query.
I have multiple tables in the database, but the 2 I'm looking at are TBL.Trip and TBL.TripDiary
A trip is logged in the trip table, and then an operator logs a diary entry against the trip. One of the options that the operator selects is when they receive an email back from the traveller, this is logged as a diary entry.
I need the query to look at the DIARY_Action field and select all records in the TBL.Trip that DO NOT CONTAIN an entry for Diary Action "4".
I can produce a select query that gives me the results to see all trips that HAVE had a response, with a simple IS LIKE "4" query in the action field.
If I change this to IS NOT LIKE "4", I get the results that I need, but duplication due to the various other "diary" entries in the table".
I simply need the inverse of the IS LIKE query but cannot see how to remove the duplicates?
I have a Inventory DB and i want to integrate scanning. So far i have a table called StockInfo, this table holds information about bar codes (device type, make, model). I have a form called Scan_Barcode, on this form I want to be able to scan a bar code into a text box (text0) and use a afterupdate and requery function to display the results onto a form called EnterInventory.
Not only just the results but I want certain columns from the query to display in certain text boxes on this form. I have a query called FindProduct. that filters the criteria by whats entered on the Scan_Barcode text box (text0). So when i scan a certain bar code i can get the query to display certain product information for the bar code. I just cant get the results onto the HarwareStock form.
