I am trying to work out the time span in days between the day I archived a record and the current date. In simple terms it would look like this:
Me.TimeSpan = Now() - Me.ArchiveDate
Now I know this isnt right, cause I tied it! Can someone put me in the right direction please.
Hi there. I'm just jumping into Access and have the following question. In my Purchase Order Table, I have a date field calcualated as text, i.e. "01/12/04". I need to convert this to a date format in my queries so I can do calculations, i.e. 01/12/04 - 01/05/04 = 7 days. Can someone help me with how to convert this text date to a date format. Sorry if this is an easy question. - AJS
View 4 Replies View RelatedHi
I would like to manipulate some date information. I have a start date field and an end date field and I would like to draw up a schedule for payment where the Acess takes the finished date and the start date to get total days appart then devides this by a value set by the operator. say If the operator wanted 6 paymes then my total days would be devided by 6 giving me the number of days to add on to the start date. Then with these dates a schedule is made up and the code I have tried looks something like this.
Dim valuation1 As Date
Dim valuation2 As Date
Dim valuation3 As Date
Dim valuation4 As Date
Dim valuation5 As Date
Dim valuation6 As Date
Dim valuation7 As Date
Dim valuation8 As Date
Dim valuation9 As Date
Dim valuation10 As Date
Dim valuation11 As Date
Dim valuation12 As Date
Dim startdate As Double
Dim findate As Double
Dim valcounter As Double
'retrieve start date and end date
startdate = CDbl(Me.Start_Date)
findate = CDbl(Me.Completion_Date)
'calculate evaluation periods
Dim valCount As Double
Dim valDays As Double
valCount = CDbl(Me.Valuation)
valDays = (startdate + ((findate - startdate) / valCount))
'Work on entering valuation dates
Do While valcounter < valCount
Select Case valcounter
Case "1"
Me.valuation1 = startdate
Case "2"
Me.valuation2 = startdate
Case "3"
Me.valuation3 = startdate
Case "4"
Me.valuation4 = startdate
Case "5"
Me.valuation5 = startdate
Case "6"
Me.valuation6 = startdate
Case "7"
Me.valuation7 = startdate
Case "8"
Me.valuation8 = startdate
Case "9"
Me.valuation9 = startdate
Case "10"
Me.valuation10 = startdate
Case "11"
Me.valuation11 = startdate
Case "12"
Me.valuation12 = startdate
End Select
valcounter = valcounter + 1
startdate = startdate + valDays
Loop
' this value is to test the interval period
Me.tdays = valDays
I am new to vb and so ths code is not going to be the best or anywhere near but any help would be great.
Thanks
Hi
I was wondering if somebody could help with a problem I have come across. I am currently developing a database for a small charity that I work for. The aim of the database is to record when staff undertake counselling.
I have created a query that calculates the current age of a client in the database uing the following expresion:
Age: Date()-[Date of Birth]
The Date of Birth is formated as a Short Date
In the query I have set the format of the column in the query to 'yy'. This then just displays the age of a client. This work fine apart from ages which are less than 30. If the age is less than 30 e.g. 29 it displays the date as 1929.
Does anybody know how I might be able to solve this or an alternative way in which to calculate dates and display it as 'yy'. (Its been a few years since I last work with access so skills a little rusty)
The reason behind the yy is that the monthly & yearly stats have to group by age ranges.
I am using Access XP (2002) SP2.
Many thanks in advance
Tony
Hi
I have a field for 'deadline' date and I need to show all records where the deadline date is within 7 days of todays date. (Obviously todays date will change daily...)
I have tried subtracting the date from todays date but it doesnt work.
All help appreciated, thanks
Martin N.
Hi Guys,
Just a quick request for a bit of help.
Tries a few things but didnt work.
I have a form which has an employee start date.
What I need to do is work out the holiday entitlement of each emplyee.
The math behine this is, if they have been here less than a year,
we do the following.
20 Days holiday entitlement per year, Divided by 52, then multiplyed by the ammount of weeks remaining in the financial year.
eg, (20 / 52 = 0.384615384) * 31 = 11.92
So they would have 12 Days holiday entitlement.
But if they have been here for 12 months or more, they are entitled to the full 20 days holiday.
How would I express this as an expression or query or VBA to calculate this.
I just cant figure it out, especially the if been here 12 months or more.
I have the start date, in a tbl called tbl_employees if that helps. ( also in the form frm_employee_details )
Our financial Year runs from the 1st December - 31st November
Thanks in advance for any help / advice
Max
Several questions here, trying to lead up to the easiest code...
First is I have a table with some dates, and I need to do some date calculations, but one of the dates I need will vary. So I was thinking of having a parameter ask for it. Is this the best method?
Second, then once I have this date in, I'll need to have it subtract from another dated reference in the table to figure out the numbers of days difference. e.g. 05/31/06 - 05/01/06 = 30 Can you get two dates to subtract like that and come up with a general number field? If so, then will the dates have to be text, converted to numbers, or can stay as dates?
I've tried several methods and have been quite unsuccessful in each attempt.
Thanks
Hi,
In MS Access i'm trying to calculate the difference between one date time to another. for example
26/04/2007 09:00 am
07/03/2007 10:30 am (Current date time)
This should work out the:
days
hours
minutes
seconds
I did want this to be shown on a form
Thanks
Hi there
I need to perform a query that works out how far in advance people book holidays. I have the arrival date and also the booking date, and I think I should be using DateDiff. However, I tried to put it in an existing query and it hasn't worked:
SELECT Bookinfx.[Park Name], Bookinfx.[Accom Type], Year([Start Date]) AS FilterYear, Count(Bookinfx.[Park Name]) AS Bookings, DateDiff("d", [Booking Date], [Arrive])
FROM Bookinfx
GROUP BY Bookinfx.[Park Name], Bookinfx.[Accom Type], Year([Start Date])
HAVING (((Year([Start Date]))=2004));
Any help most gratefully received!
I am trying to write a query that will return all records whose field expiration_date meets my criteria. The criteria is
If expiration_date - 5 years < today's date then.... do you subtract the total days? months? Any help would be appreciated.
Thanks in advance,
Mark
I am building a database and in it I need to do date calculations. Without too much detail I input a date based on the built in calender from the date/time field and based on that date I need to have the following data returned into other individual fields: 6 months from that date, the days until that date, 2 months from the date input, 4 months from the date input, 5 months from the date input, 60 days from the end date, 45 days from the end date, 30 days from the end date, and 15 days from the end date.
Example: I input "Sep 10, 2015" and I would get "Mar 10, 2016", "181 Days", "Nov 10, 2015", "Jan 10, 2016", "Feb 10, 2016", "Jan 10, 2016", "Jan 25, 2016", "Feb 9, 2016", "Feb 24, 2016".
I have read through websites regarding date calculations within Access but I cannot find the specifics for the application that I need.
I tried this Between (Date()+7) And Date()
But was wondering how do I write this in an IIF statement.
I want to get a text field going for example:
IIF Between (Date()+7) And Date() THEN "Certification Alert"
I need to calculate (in a query) the Actual Time of a job. I have the start date, start time, end date & end time (all separate fields). This seems to works ok by subtracting the start from the end.
Then I need to calculate the Estimated Time (time it should have taken). This is done by taking the Quantiy divided by the Rate-Per-Hour. This seems to work out ok in the Query, e.g., 101000 / 15000 = 6.66667 hours. But when I display this result in a report as a "Short Time", I get 16:00 instead of 6:40. How can I get the correct display?
The other problem is that I need to divide the Estimated Time by the Actual Time. This also gives me wierd results - I suppose because one is a decimal format time and the other is a "Short Time" format. How can I get the correct answer?
I need a query that will relate values to given date ranges. For Example:
Table: TaxTypeRange
Values:
TaxType; FromDate; ToDate; Contact
W2; 1/1/15; 3/31/15; Tom
1099; 4/1/15; 6/30/15; Tom
W2; 7/1/15; 12/31/15; Tom
Table: Bills
Values:
Contact; BillAmount; BillDate
Tom; 1000; 3/31/15
Tom; 1100; 4/30/15
Tom; 1200; 5/31/15
Tom; 1300; 6/30/15
Tom; 1400; 7/31/15
Requirement: For every period where the TaxType = W2 the query should multiply the Bill amount by 1.20, so the result should be something like this:
Query: BillsAndTax
Values:
Contact; BillAmount; BillDate; TotalBill
Tom; 1000; 3/31/15; 1200 (TaxType = W2 so 1000* 1.2)
Tom; 1100; 4/30/15; 1100 (TaxType = 1099 does not apply 1.20)
Tom; 1200; 5/31/15; 1200 (TaxType = 1099 does not apply 1.20)
Tom; 1300; 6/30/15; 1300 (TaxType = 1099 does not apply 1.20)
Tom; 1400; 7/31/15; 1680 (TaxType = W2 so 1400 * 1.2)
Not sure how to set this up the right way.
I have solved the problems getting values on the subform. I have not in getting values on the subform.For instance, on the one titled phone use the formula in the tutorial is:
=[sbfCustomerRoomUse].[Form]![txtTotalPhoneUse]
#Error results when the doc is put into a form mode.
Now when I input each value in the equation above separately.I still get no entry.
For " = sbfCustomerRoomUse" , I get #Error;
and for "= txtTotalPhoneUse", I get #Name.
CustomerRoomUse and txtTotalPhoneuse are from the subform that was dropped into the customer form in a previous step. It shows that explicitly when designed sbfCustomerRoomUse on the main that CustomerRoomUse come from a subform. This does not seem to need to be done with txtTotalPhoneuse, and I am not sure why. Neither one gives me a desired calculation result.
I have an odd problem that has stumped me for several days. I'm working on a form that contains a chart. The chart is based on a query, which is based on another query, which is based on a table. In the top query, I need to put some calculated fields that operate on other fields. But when I try to multiply two fields together, I get Null. I'm pretty confident that the fields I'm operating on are numerical.
The fields of the query should be:
MaxOfEverInSchool
MaxOfSurvivalToGrade
MaxOfEverInSchool
With these being the calculated fields:
MaxOfSurvivalToGradeCum: MaxOfEverInSchool*MaxOfSurvivalToGrade/100
MaxOfCanReadCum: MaxOfEverInSchool*MaxOfSurvivalToGrade*MaxOfCanRea dCum/10000
Any insight would be greatly appreciated--I just can't understand why Access would suddenly refuse to do math.
Hi ive made a query but instead of calculating the total at the end of each line I want it to add up the total quantity at the end.
For example:
ID Description Quantity
ID Description Quantity
ID Description Quantity
ID Description Quantity
ID Description Quantity
How do i get the query to add up all of those quantities?
I'm hoping this is a no brainer...I am a complete newbie and self taught so apologies for not knowing the correct techie terms!!
I have a db with products...
Each product has a price (to customer) and cost (to me the seller)
What I want to work out is the margin i.e. price minus cost divided by proce multiplied by 100 to give a margin in percentage terms.
The data is held in a table with a record per product with the price and cost..
I want to build in another fieled per record that calculates the margin...
Thanks very much
Jessica
(I would also like to be able to work out decreasing margins if I was to extend say a 10% or 20% discount to the customer but I guess I shoudl walk before I run!!)
Hi, I have a database and on one table I have dates stored for certain jobs. I was wondering if anyone knew how to automatically calculate an end date if the start date and duration is entered!
Do I use a certain query?
Hope you can help, Tobi :)
Hello all,
I'm after some advice. Access is not one of my strong points (even though I use it alot in work!)
Anyway, is it possible to create calculations in access similar to those in excel????
Ok I'm really new at using access so go easy on me. I am trying to write a database to keep 30 measurements of a part grouped by lot number and then calculate the standard deviation, mean and a few other calculations, however I am unsure about how to do the calculations in access.
I would like the database operator to be able to enter the data then print out a report per lot, with the entries and the calculated answers.
I'm just unsure where and how to do the calculations... any help or suggestions?
Thanks in advance!
Hi,
I've read plenty of advice warning against performing calculations in tables. What is the best way for me to achieve this.
I need to calculate the product of a number of fields.
Field1 * Field2 * Field3 * Field 4 = Value
Field1 and Field 2 change periodically
Field3 and Field4 change less frequently
I want to be able to perform filter queries using the resulting value
i.e return all items with a value greater than 100
Thanks in advance.
Al
I'm having a problem with this age formula in the query :
AGE: DateDiff("yyyy",[birth_date],Date()) & " " & " years" & " " & "and" & " " & DateDiff("m",[birth_date],Date()) Mod 12 & " " & "months"
Need your help guys in 2 probs :
1. age calculated is not right.
2. need to compute what w'd be age on the sep 1st 2008 - how do I do it?
Appreciate your help.
Thanks.
Hi,
I'm trying to a create a report to list results for a running club based on series-to-date. To do this, I allocate points to the first 100 runners to cross the line in each race. The winner gets 100, second place 99, and so on with the 100th person getting 1.
In the database i have 1 table holding member details, then one table holding races. I also have a table linking the 2 called race_entry so i know what members have entered for which races. I have one other table called race_result that links the runner to a race and holds the position they finished in the race.
How could i use the data in the race results table to add up all the points they earned by looking at their finishing position in the races they run and then listing the points in order in a report.
I assumed it wouldnt be necessary to have a point field in the table as its deriveable.
Any help urgently needed!!!
This is more than likely simple for a lot of people out there but it has me stumped. I have a form that has a two combo boxes with dates in both ( so the user to pick from and to dates) now I am always going to be adding more dates as time progresses. I need the next form to add the info with the dates no mater what the user picks.
For example I am going to (once a week) be adding new info to the table.The end user is going to pick 06/24 (to indicate the end of the week) in both forms or 06/24 in the from box and 07/01 in the to box. In all situations I need the next form to add the data together.
Sorry for the long post but didn't know how to state it any simpler.
Hi everyone!
I am a beginner with Access and was wondering if someone would be so kind to give me some pointers
I have created a form where the user can select which dates they require a hotel for the evening. I was looking for some advice on how I can go about putting an area on the same form which calculates a sub price for the days they have selected. If I am not being clear then ask for more details.
Thanks