i have 2 tables.. 1 with bookings and 1 with a BonusPeriod range.
in the Bookings table there is a field called [ServiceDate]
in the bonus table i have a field called [Period] which is text i also have 2 dates, [StartDate] And [EndDate] i need to Dlookup the Bonus table to return the value of the period table based on where the [ServiceDate] falls.
i dont want to use VBA (i really need it to work within a query that inserts it's data into another table)
i've tried everything but had no joy
Expr1: DLookUp("[Period]","BonusPeriods","[ServiceDate]" Between "#[StartDate]#" And "#[EndDate]#")
Expr1: DLookUp("[Period]","BonusPeriods","[Staff_BookingsAndQuotes_Master].[ServiceDate]" Between "#[StartDate]#" And "#[EndDate]#")
Expr1: DLookUp("[Period]","BonusPeriods","(FormatDateTime([ServiceDate]),"yyyy-mm-dd") Between (FormatDateTime([BonusPeriods]![StartDate]),"yyyy-mm-dd") and (FormatDateTime([BonusPeriods]![EndDate],"yyyy-mm-dd"))))
im looking at doing a query to check records for absense
the 1st will be checking if the person has been absense for 4 weeks (28days) so i will have to check from absense date to today does that equal or greater than 28 days but lesss than 91 days (13 weeks) and is the return to work date blank
Hello, I have a form on which I have places a textbox named txtDOB which stored a date of birth. I have then another text box which has the following function:
Hello, I am having problems creating a Exp to show the difference in time. I am currently using :Expr1:DateDiff("n",[TimeReported],[TimeDefectGiven]) which is returning a figure in decimal. If the answer was to be 90 minutes i need it to return the figure as 1.50 instead.
I have looked on the site using Date Diff and Time without success
I have a date field, I am trying to have my query only pull the records that have a date entry that is within and up to 90 days from today or Now. For this query all other records are irrelevant.
THis is what I have found so far
=(Abs(DateDiff("y",Now(),[ls_Exp Date])))
Can someone show me how to add the 90 days in there?
I'm using the date diff .... DateDiff("h",[Start time],[End time]) in a query and then I report the results in a report. I have run into a problem for the first time. I had a start time of 7:00pm, and an end time of 7:00am. This was calculated in the query as (-12) which is messing up my cost formula.
I have a problem with a date diff calculation: On my form I have placed two controls, a text box and a check box.
The textbox contains is a date field (mm/dd/yyyy). What I need is a code that checks the checkbox if the date in the textbox is within the last 12 months. This is the code I am using but not working:
If DateDiff("yyyy", textbox, Now()) >= 1 Then Me.check1 = "yes" End If
Hi I have two fields one which represents the time participants went to sleep, one when they woke up however I dont have any dates - it refers to what they do usually. Is it possible to minus sleeptime from waketime to determine duration of time in bed without dates? Or do I assign dummy dates to use date diff function?
I am having a problem with a datediff expression.I have a query that pulls the first date and the last date out of a list but are put in seperate fields. I thought I could build an expression for datediff to calculate the number of dates between them. I can't just put in the dates because they are constently changing.The expression I have is:
[datediff("d",[min/max edging unit #2]![firstofupdate/time by month],[min/max edging unit #2]![lastofupdate/time by month])]
I'm using the following function to calculate date diff in network days (excluding weekends)
Public Function NetWorkdays(dteStart As Date, dteEnd As Date) As Integer Dim intGrossDays As Integer Dim dteCurrDate As Date Dim i As Integer intGrossDays = DateDiff("d", dteStart, dteEnd) NetWorkdays = 0
[Code] ....
So when using this function in a query to get number of networkdays between 2 date columns ...it works fine but throws a #Error where there is blank entries in either of 2 date columns...
I need to find a way to display Null instead of #Error...
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I'm trying to get my "IncidentDate" field to autopopulate two other date fields to a few days from the "IncidentDate". The other two date fields are "ContainDueDate" and "RootDueDate". I'm trying to accomplish this on my "Test CAP Form"
I tried using the following in the BeforeUpdate of "ContainDueDate" and received a complier error: expected =
Code : DateAdd(d,2,[IncidentDate])
so I removed the parenthesis and nothing happened
Code : DateAdd d,2,[IncidentDate]
I even tried redoing it in the AfterUpdate of "IncidentDate" and nothing happened either
Code : DateAdd d,2,[ContainDueDate]
I'm not sure if I'm even using the right function to get what I want.
Can someone tell me how to get year to date totals, month to date totals, week to dates in a query? I need to get all three for three different fields.
I was not able to get the totals with the formulas given. I received the totals for each day instead. Are there any other suggestions? I am trying to different formulas, but they are not working either. I did try doing different queries with the formulas to see if that would work.
I am creating an online post, similar to a guestbook. When a user submits an entry, I am storing the date and time in a column titled "Timestamp", which is formatted 8/4/2005 9:16:58 ("General Date"). I am running the table through a query which is then posted on the web.
What I would like to do is this: I would like to use Timestamp to display the date that the entry was submitted, but not the time (basically, "Short Date"). Can I exclude the time using a query without changing the actual data stored in each record of the table? I understand that the time stored is completely different than the time displayed, even in the table. How can I do this?
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code: Private Sub Update_DOD() Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset Dim DOD As String rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code: CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
Using access 2010; i have a form that includes a date field. Is there a way to force the user to only choose a month end date? When the user clicks the date from the popup, they may use 9/1/2013 when the mgr. want them to use only 8/31/2013. I am thinking validation field to put a msg but want to be able to force it not the option.
I have a report that displays simple date fields. One of the fields is "lease execution". On the report, I want "lease execution" to display differently depending on the date the report was run.
So:
- If the "lease execution" date is more than 120 days away from today, I want it to display as Q YYYY. - If the "lease execution" date is between 120 and 90 days away from today, I want it to display as MM/YYYY - If the "lease execution" date is 90 days or less away, I want it to display the normal date MM/DD/YYYY
I was thinking I would need to do DateDiff() to figure out an amount of days that's between Now() and [Lease_Execution]. Then based on that amount make the report show it differently. Pseudocode would be: if DateDiff() = 40, then display [lease_execution] as MM/DD/YYYY
Table 1 has all the items I am trying to sell with sell by date after which I cannot sell this item. Then in Table 2 I have forecasted sales. So now I am trying to calculate stock consumption to see if I will be left with any stock that I cannot sell.
So now somehow I need to deduct sales forecast from my stock holding but it needs to go by date i.e. consume all stock for Item 1 with date 16/09 before moving to Item 1 with sale by date 23/09.
So based on the attached example, I can see that on 16/09 I will consume only 5 cases from sell by date 16/09 and another sale is 18/09. So that would give me information that I will be left with 95 items dated 16/09, which I cannot sell because they will be out of date.
Ideally I would like also to include the logic that if Item is out of date it would move to the next sell by date.
So in this case sale of Item 1 forecasted for 18/09 (94) would consume the whole stock (50) with date 23/09 and another 44 from date 01/10
For Item 2 I can see that units with Sell by date 30/09 will be consumed on 25/09 and I will start taking stock from next sell by date which is 14/10.
I create a database through ms access and there have a birth date box and admission date. Another box for Age.I want to see the age in month or year figure in to the age box when I go next field. Which will be calculate from admission date to birth date.
I am creating a repayment schedule (as a report) and I want to display a series of fields as a column which return (show) a date one month after the date in the field above.
The first repayment date field (Line 1) will show a date one month after the loan was paid out. the Next field below will show the date one month later.
I can't simply insert the "Date + 30" because that would get out of since over the year. If the loan was issued on say the 15th of January, I need the first field to display 15th February and the next would be .... 15th March.... Yes - You've got it!
Now I could do that in Excel, but I don't know how to get Access to do it.
I'm reworking a db to make it web compatible. Right now I'm working on my Price and Sales tables.There are about 900 Sales records, 450 Price records (for about 45 Items).
I have re-done my Price table with an Autonumber Key field. (It had a multi-key which I understand web db does not support.) Each autonumber key represents a Date with new Price for a Company/Item. The Price change Dates are random.
I have put a Foreign Field in my Sales table for the Price key field.
My dilemma is matching the Sales with the Prices.
When the Price Date and Sales Date do not match (at least half of them don't match), I need to look back in the Price table to the max Date BEFORE the Sales Date in the Sales table for that Company/Item in order to select the correct Price key.
I am building a database to track contract of employees so that I can know which contracts are valid and which are expired.
My table has the following fields:
ID (Primary key) Employee ID (Foreign key to link to the employee table) Start_Date End_Date Status (Either valid or expired) Challenge
I want when I enter the end date, the system checks the end date against the current date and fills in the status field with either valid or expired as appropriate. For instance if the contract end date is March 10,2016, the status must be filled in the word valid.