Date Parameter In Report
Mar 29, 2007
Is there any way to avoid the error code when using the date parameters in Report header when there is no data for the specified range.
The following are the parameters being used to get the date range. They work fine as long as there are records in the date range entered.
=Reports![Toys and Adapted Equipment Centre Signed Out By Date Range]![Enter Start Date]
=[Reports]![Toys and Adapted Equipment Centre Signed Out By Date Range]![Enter Final Date]
View Replies
ADVERTISEMENT
Sep 9, 2011
How do i can apply date parameter to a report which takes starting and ending dates from a form...
View 1 Replies
View Related
Apr 28, 2006
I have a report that has an underlying query that asks for Start Date and End Date.
Is there anyway that I can get what the user inputs into the box to be put into the Page header of the report?
ie: user enters into the parameters
[Start Date] 01/01/2006
[End Date] 04/04/2006
Then when the report displays it says
Report for the period 01/01/2006 to 04/04/2006
Thank you for your time
View 4 Replies
View Related
Sep 21, 2014
I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.
Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.
View 5 Replies
View Related
Aug 4, 2006
Hello ... by problem:
Explanation:
Table has a single field (AllocAmt) that is repeated for each detail transaction. Therefore I can't put the sum of the single field on the report because it adds that sum times the count of the detail.
The solution I attempted was to create a subreport using a summarized query then divided the summarized AllocAmt by the count of the same field and got what I wanted. It worked beautifully. I named the calculated field and then created a sum of the new field (SumAllocAmt) in the subreport report footer. I ran the subreport and my totals came out fine.
Then I added the subreport to the original report and the information for each grouping came out fine.
Now my problem ... when I call the field ('=srptAllocAmt.Report!TotalSumAllocAmt") I created in the subreport report footer it does not give me the total for all groups in the original report. In fact it gives me the last record amount instead of a total. When I enter the expression "=Sum([sprtAllocAmt].[Report]![TotalSumAllocAmt])" and try to run the report a box pops up requesting a "Parameter Value" for the field sprtAllocAmt.Report!TotalSumAllocAmt. Why doesn't it recognize that I want a sum of the field contained in the subreport? I've gone to the properties box in all the subreport fields and made the data available "overall". I don't know what else to try. Any suggestions?
View 2 Replies
View Related
Aug 16, 2007
Is there a way I can display my parameter in my report? I have a report that's generated from a parameter query. In a control I want to show what the parameter values are: Between [start date] and [end date]
View 2 Replies
View Related
Jun 5, 2013
I have a report based on a query with a between two dates parameter (Begin date and end date). This parameter is fed from a form. All works well - query, form and report. My question is can the date parameter appear on the report header so users know the report was based on a start date of 1/1/2008 and an end date of 1//2009 for example?
View 4 Replies
View Related
Jun 14, 2005
Hey folks,
sorry if this is an oldy but.........!!!!!!!!!
I need to insert the parameter dates for a query into a report. I have tried all the methods I can find but none seem to work. I think its to do with the way my queries are structured.
I have a basic query (q1)! Based on this is a grouping query (q2)! Based on this grouping query is my report. I have set up a form prompting for the parameter dates. This all works ok and my report displays the correct data (between the dates entered). The problem is that I cannot get the report to show the parameter dates.
Help. Its driving me nuts.
Billsack
View 1 Replies
View Related
Jul 29, 2006
I have a report which asks for the beginning date and ending date which they want. The report is generated using this information. I want to put the information entered in the parameter request into the heading of the report. How do I recover this information to put it in.
Jerry Hughes
View 2 Replies
View Related
Oct 24, 2013
can i set a value in report as parameter in query
View 1 Replies
View Related
Mar 28, 2014
Background: Access 2003
I have a database with which I use to generate reports as pdfs to load to a website.
However when I go to save the file as a pdf it is always as the report name.I am trying to automate this by using a macro as I need to run a report 50 times for ships with a different parameter each time (name of the ship) Another report needs to be run about 30 times, this time the parameter being a date And finally two other reports, but I can live with those being the name of the reports.
Firstly can this be done?
Secondly which would be the best way?
I've tried using the macro route by I run my Report "Main_Ship" with a where clause of [ship]="wiltshire". This produces the report with the relevant ship, but I am then unsure what to use next to save it as a pdf with the name "wiltshire" using the macro route.
or
Create a VBA routine that runs the report as many times as required each with a different parameter for the name of ship or date.?
[URL]
View 6 Replies
View Related
Mar 14, 2006
I created a combo box that runs a parameter query based on the name entered in the box.
Is there some way to return the results as a report instead of in datasheet view?
I'm wondering if inserting some sort of code into the event procedure of the "OK" button (which launches the query) would work.
Would greatly appreciate help---
View 4 Replies
View Related
Nov 9, 2006
Ok I saw this posted up in the forum but it was not explained.
I have a Query which asks for a parameter before giving an output.
I have a report that uses this query to display the information.
Ok what I am trying to do is create a form that has a textbox and I enter the parameter's information in that textbox or textbox. How do I send the information to the query?
The reason for such a thing is people tend to not follow the set guidelines for putting stuff in a parameter box. So what I decided to do was set up a calendar form which a person has to physically choose the date from the calendar and this leaves no room for real error. My problem is I can get the calendar information to the textbox or textboxes but can't figure out how to code the button to send the textbox information to the query & parameters & report, etc...
Can someone please help me out of this situation? or point me to a starting point?
View 4 Replies
View Related
Dec 5, 2013
I am trying to add another parameter to a report to only get those specific records. I did not write the code and am very confused on how it works. Right now it is getting records in the Access database between the 2 dates entered. But NOW I need to add a parameter to select only records between those dates AND with the AccountNumber LIKE acctltr (this is the field from the form). They can either put in an "X" or an "P X". The AccountNumber needs to end in which ever one they enter.
Here is the code that is currently existing and supposedly works. At least it gets all the records between the dates even tho it still prints records with a ZERO balance.
Code:
Private Sub cmdprint_Click()
On Error GoTo exit_cmdprint
'mysql = "SELECT * from InvoiceTable " & _
' " WHERE ((not InvoiceTable.InvoicePrintDate1 Is Null) AND (not InvoiceTable.InvoicePrintDate2 Is Null) AND (InvoiceTable.InvoicePrintDate3 Is Null) AND (InvoiceTable.InvoiceDate Between #" & dtefrom & "# And #" & dteto & "#))"
'Me.RecordSource = mysql
[code]...
View 5 Replies
View Related
Mar 11, 2015
So I have a report that opens via Parameter. The SQL behind the query that runs the report is (I took out alot of lines that aren't necessary to answer the question)
PARAMETERS [Enter Your Box Id] Short;
SELECT DocumentsTable.OrganizationalID,
.
.
.
DocumentsTable.Status
FROM DepartmentsTable INNER JOIN (Year1 INNER JOIN DocumentsTable ON Year1.ID = DocumentsTable.RecordDateYearID) ON DepartmentsTable.ID = DocumentsTable.DepartmentID
WHERE (((DocumentsTable.Voided)<>'Y' Or (DocumentsTable.Voided) Is Null) AND ((DocumentsTable.ID)=[Enter Your Box ID]));
So if I click on the report, I get a little popup that says "Enter Your Box ID", and when I do, the report works just as expected.
However, I also want to be able to open this report via link from another report, and pass the Box ID #. I just can't get the syntax right. I would have thought it was this:
Private Sub ID_Click()
DoCmd.OpenReport "Find A Box", acViewReport, , "[Enter Your Box Id]=" & Me.ID
End Sub
However when that execute, I still get the pop up asking for "Enter Your Box ID"
View 4 Replies
View Related
Apr 16, 2014
I have a report that pulls data from a crosstab query. The report works perfectly and prompts for a "StartDate" when it is run.I need a form with a date field that can be selected. Then a command button which when pressed opens the report with the selected date passed as the parameter.the code I have so far is in the on click event of the button:
DoCmd.OpenReport "rpt_12MonthlyInvoices", acViewPreview, , "StartDate=" & Me.txtStartDate
I was hoping that this would pass the txt.startDate field on the form to the report's "StartDate" when it is opened, but it is still prompting for the parameter when the report loads.Should I be using openArgs rather than the where clause? Or do I need to configure something in the "on load" event of the report also?
View 1 Replies
View Related
Apr 25, 2014
I have parameters set in a query. This query generates a report. I want to have the parameter field the user enters show in the report. Example: I have Region set up as a parameter. The criteria in the query is Like "*" & [Region] & "*" The problem I'm having is in the report it only returns what the user enters in the parameter prompt.
For Example: If I type south it only shows south rather than south east or south central (which is the whole field), etc. on the report. It shows in the table generated by the query but not on the report. If I leave the parameter prompt blank it brings back all the records like it should but again leaves the "region" field on the report blank.
View 4 Replies
View Related
Jul 12, 2014
I have a query that I use to populate a report.
The query has a parameter box that opens and asks the user to enter a date.
I would like to display this date in the Report heading.
Is there any way that I can grab the value entered into the parameter query and display it on my report heading?
View 1 Replies
View Related
Nov 21, 2011
I would like to display the value of my parameter query into the title of the report.How could I do this on Access 2007?So far I have made another field in the query and called it ParaDate: [JobDate]
Then in the report title I wrote:
=Limousines booked for&" "&[JobDate]
But it's not working.
View 1 Replies
View Related
Jan 4, 2013
I have a couple of questions which are sort of related. They both revolve around Parameters with a Query/Report.
Here is a bit of background. The source Table is formatted in a way similar to this:
Code--Account#--Expense Description--Jan--Feb...
When running the Query, and associated Report, the user is prompted to input an Account# via a Parameter that I set up. The dialog box pops up with the word "Account#" and a box for the user to enter by what account that they want to restrict the Report. [Question 1] - Is there a way to make this dialog box contain a drop-down box with a list of predetermined accounts instead of the aforementioned entering of an account number? If not via this dialog box, is there another way?
Also, multiple accounts roll up into a single P&L line item. For example, let's say that accounts 1234 and 5678 both make up "Equipment". [Question 2] - Is there a way to run the Report in such a way to return all accounts which roll into a line item? I want to have the ability to run by either an individual account or the P&L line in total.
View 14 Replies
View Related
Jan 9, 2006
Hi everybody,
I have a report that is based on an underlying query.At the query level,I
want to define parameters of date data type so that records to be displayed
should fall between DateA and DateB. ie Between[Enter Date A:] And [Enter Date B:].
I want the DAteA and DateB to be only days and Months of a year.
Say my DateA = 01 Jan 06 and my DateB = 31 Dec. 06
But I want only the Parameter to be Between[Enter day and Month A:] And [Enter day and Month B:].
How can I write a query with the two parameter values?
Thank you
dfuas
View 1 Replies
View Related
Apr 6, 2007
I have a query which prompts for two dates in the format of -
BETWEEN [Enter the start date] AND [Enter the end date]
How do I provide a default date for one or both of the dates?
Robert
View 2 Replies
View Related
Apr 16, 2007
I am trying to run a parameter qry that pulls all values under the specified range. My problem is that table 'VPS Sales Validated' is in long date format. I have tried reformatting that table using =Format([time],"Short Date") but that isn't working because I only get returns where the value didn't already include the hours and minutes. So Can someone tell me what I need to do in either the qry below or how to reformat the date in main table?
SELECT Sum([VPS Sales Validated].[Master VPS Table_Amount]) AS [SumOfMaster VPS Table_Amount], Sum([VPS Sales Validated].Time) AS SumOfTime
FROM [VPS Sales Validated]
WHERE ((([VPS Sales Validated].[Batch ID])<>0))
HAVING (((Sum([VPS Sales Validated].Time)) Between [Enter Start Date:] And [Enter End Date:]));
View 3 Replies
View Related
Aug 3, 2007
I have an EndTerm field (this is a calculated field); I want to set up a parameter query that enables me to type in a date which will retrieve any records BEFORE that date. I've used < [Enter date] and results were not right. i.e., I entered 1/1/2007 in the parameter and the results came back with records dated 1/1/yyyy instead of anything before 2007.
View 7 Replies
View Related
Jun 19, 2013
My table has one date of service field. In my query, I have a criteria to query a range, e.g., Between 03/01/2013 and 05/31/2013. Is there a way to put this in a parameter box so when users click the query they will get a parameter box to enter date range? I know how this works for a single date, not sure if it can be done with a range.
View 14 Replies
View Related
Nov 10, 2005
Hi,
Need advise on how to display on my report the criteria that i had specified in the parameter query even if the result is nil.
How can this be done??
Thanks!
View 5 Replies
View Related
