Scenario: The code below allows me to enter a date range in an unbound form which then opens another form based on the date range. If I enter only one of the dates (the beginning or the end) and not the other. I have a message box display asking for the other date to be entered.
Problem: The message box displays correctly but the secondary form still opens because my open form code is separate from the verify dates code. I can see the problem but I can't think how to fix it.
Desired Results: After the message box appears and I click OK on the message. I want the secondary form not to open at all.
***********CODE SNIPPIT************
'Build the wherecondition to use in the OpenObject method.
If Not IsNull(txtTxPrID) Then
strWhere = strWhere & " AND TxPrID = " & txtTxPrID
End If
If Not IsNull(txtSSN) Then
strWhere = strWhere & " AND SSN Like " & "'*" & txtSSN & "*'"
End If
If Not IsNull(txtAddDateBegin) And Not IsNull(txtAddDateEnd) Then
strWhere = strWhere & " AND AddDate between #" & txtAddDateBegin & "# and #" & txtAddDateEnd & "#"
Else
DoCmd.CancelEvent
Beep
MsgBox "Please enter both dates", vbInformation, "Incomplete Search Criteria"
End If
'Open Form based on the contents of strSQL.
stDocName = "empfrmTaxPayerInfo"
DoCmd.OpenForm stDocName, , , strSQL
I have a form with a subform which searches the database using multiple criteria using Text Boxes and a search button. One of which is a date range which is entered into 2 text boxes(SDTxt and EDTxt). At first glance the code works. If I enter 03/05/2015 in SDText and say 24/05/2015 in EDTxt and hit the search button(SearchBtn) the correct records are shown in the subform (Office Subform). But if I enter 05/06/2015 in SDTxt and 13/06/2015 into EDTxt not only does it show the records between the 2 dates but also all records from May. I have put on a cut down version of the code which just shows the date range search.
Code: Private Sub SearchBtn_Click() Dim strWhere As Strin If IsDate(.SDTxt.Value) And IsDate(.EDTxt.Value) Then strWhere = strWhere & _
I am building Access (2013) database for 100+ employees to keep track of their expiry dates of visa/passport/work permits, for that to work I need to be able to search between date range to generate a report to work on. please check out the image attached as it will explain better where I am stuck, with current settings access keeps giving me empty query table as I think it searches for exact same result in all 3 fields at the same time. But I want it to search between all 3 fields and display if any of the 3 fields falls into that range.
I have created a database based off of 1 table that holds all of my data. I need to create a form that queries off of the following columns from my table.
Acceptance Date
Sales Rep Name Sales Region
I want to make a form which searches between a beginning and end date range, Sales Rep Name & Sales Region that can be pulled from these 3 queried selections all from the same form.
I'm trying to create a combo list box in a form that has all 12 months (January, February......etc,) listed in rows, and depending on the selection will bring up only that particular month within a range of dates from a table. I don't want it to look at the day or the year, but only the month.
Example: I select January from the drop down list in my combo box and my form will display all records with dates that are in January regardless of month or year.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I built a custom search form that uses unbound text boxes to set the criteria for a query. For example, I have an unbound text box, LastName on my search form. Then in the query, I set the criteria to Like "*"&[Forms]![SearchForm]![LastName]&"*". This returns all records if the text box is left blank or returns those records that match the text box if it isn't.
I would like to do the same thing but instead of searching a text field, I want to search a number field. And I want to search for a range of values aka >10 instead of just a single value. I still need the query to return all records if the text box is left blank.
Is there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
I have some code that filters job raised I have 2 text box's txtdatestart and txtenddate after entering. date range between the too text boxs it shows me all job raised with in the period.i have entered what I would like is filter it again by client field using combo box cboclient so if the user enter's client name in cboclient combo box and date range in txtdatestart and txtenddate it will only show jobs raised with in the date range of the client enter in the combo box but if the combo box is empty show.
Code:
Private Sub cmdPreview_Click() 'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working. Dim strReport As String Dim strDateField As String Dim strWhere As String Dim lngView As Long Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
I am trying to filter out information for an ODBC query I have written, to obviously make it more concise. Because our data is not set up very logically, a lot of my queries are based on text...but that is another story. My current situation starts with a simple make-table query finding certain data within a date range. This is followed up by another simple make-table query to find other specific data within another specified date range. Then I have a cross-tab query between the two tables to locate all the data that shares the same unique identifiers. My problem lies with trying to only pull information from a certain date range. For example, I want information to be included if the data has the same unique identifier as well as falls within +/- 7 days of the received date (dd/mm/yyyy) also listed in one of the tables. Each record will likely have different received dates so I cannot set it as a constant.
Make sense to anyone? I am not confident enough to play around with some expressions...well it is more I haven't been successful at using them correctly.
I Have a table that I collect data for numerous ID's. One ID may have 5 dates that is was serviced. It is due to be serviced at set intervals which is calculated from the most recent service date. I'm calculating the next service date in a text box with the DateAdd func. =(DateAdd('m',[Cal Freq],[MaxCalDate])) with the MaxCalDate being a Max func in a different text box for selecting the most recent sevice date. I'm trying to update the [Next Due] field in the [Master Asset] table with the calculated next service date so I can do queries on items that are due service within a date range. If I do an Nex Due Expr1: in the queries to calc the next due service date then do a criteria on that Expr1: such as >=[Start Date] And <=[End Date] it states datatype mismatch? Is there a way to select a requested data range on a calculated type date/time? Or How can I update the [Next Due] filed in a different table?
I'm trying to figure out how I can set a parameter on my query to search for any activity that occurs within a month, that falls within a date range. Specifically:
Criteria TextBox: 4/2006
Activity Start: 3/6/2006 Activity End: 5/5/2006
I want this activity to show in my query because the time between start and end occurs during the month of April. It's no problem setting this up for a specific date, ie 4/1/2006, but I don't know how to do it for an activity that occurs all days between 4/1/2006 and 4/30/2006..or for one that starts 4/12/2006 and ends 4/18/2006, or starts 4/12/2006 and ends 5/9/2006. etc.
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506 dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
I have two tables: tblClasses & tblSchedule. There are joined by ClassID. For each class in the tblClasses there are several records with date field in the tblSchedule. (So each class stored in tblClasses happens on multiple dates stored in tblSchedule).
I want to create a query (SQL view) that would take two date inputs from a form(date range): datefrom & dateto, and return any class of which FIRST day of classes falls in between those dates.
(Or: how can I add a field to my query called [First day of class] that would basically have the value of the first date from the tblSchedule for the joined classID?)
I need to get records between two dates. Here is my query:
SELECT WGMAHIST_TIMEDTY.TDYPT, WGMAHIST_TIMEDTY.TDYCO, WGMAHIST_TIMEDTY.TDYSSN, WGMAHIST_TIMEDTY.TDYFND FROM WGMAHIST_TIMEDTY WHERE WGMAHIST_TIMEDTY.TDYSSN = 464299266 AND WGMAHIST_TIMEDTY.TDYEDT >= #06/29/2007# AND WGMAHIST_TIMEDTY.TDYEDT <= #09/21/2007# AND WGMAHIST_TIMEDTY.TDYPT = 1 AND WGMAHIST_TIMEDTY.TDYCO = 8
I am obviously doing it wrong because I keep getting an error that complains about the key work BETWEEN.
How can I make this work? I am using MS Access 2007.
I have a form with a combo box containing the names of the Months. What I want to do is then pass the Month name to a query as a date range. For example, select "May" from cboMonth and the query will check the date field for "between 05/01/2008 And 05/31/2008"
Here is what I have in my query but it does not show any records when I run it:
IIf([Forms]![Form1]![cboMonth]="May",Between #5/1/2008# And #5/31/2008#)
Is it even possible to use this type of an expression in the query?
Hello - I am trying to create a FOrm that will allow the user to type in two dates. From these dates a table will be created and displayed in a List Box.
Does anyone have a very simple example of the code
1. I am trying to write two input boxes to variables. 2. On click I am displaying a message box that repeates the values of these two variables 3. When they hit OK I want the records to appear in the ListBox. 4. From this point I will want to get the data to a report of some kind.
I am very new to this and am trying to see if someone has any code examples....
This is the code I have so far.....Actually I cant get passed #2 above. It shows the message box and the text but not the values of the variables...
I dont think I am using the variables right......I dont understand the syntax needed to write an input box value to a variable......
Please Help....
THanks
CODE:
Option Compare Database
Private Sub BeginingDate_BeforeUpdate(Cancel As Integer)
Dim BD As String
BD = BeginingDate.txt
End Sub
Private Sub EndDate_BeforeUpdate(Cancel As Integer)
Dim ED As String
ED = EndDate.txt
End Sub
Private Sub Command5_Click()
Dim var_BeginingDate Dim var_EndDate
var_BeginingDate = BD var_EndDate = ED
MsgBox "The Variable is " & var_BeginingDate & " and " & var_EndDate, vbInformation + vbOKOnly
I am working with a linked table that has a field [Originated Date]
I have created a query for this table and on the criteria for [Originated Date] I put the following:
Between [Forms]![Date Input]![StartDate] and [Forms]![Date Input]![EndDate]
I am using a pop up calendar to populate [StartDate] and [EndDate] fields on the form.
The format of the Date field in the linked table is "Text" not sure if this is the root of my problem ?
When I run the Query Manually and input the [StartDate] as yyyy/mm/dd and the [EndDate] as yyyy/mm/dd the query returns the desired results; However when I run the query with from the form It does not return the desired results.
It is driving me crazy not sure where the discrepency is ?
I have a query which requires date parameters, which the user enters into a form. The form enters the parameters into 4 different queries then runs them to produce a report.
This all works fine EXCEPT for one query.
If I enter my desired date range into the query (in this case it is between 01/11/2004 and 30/04/2005) it returns no results. As the only values in the date fields of the table are 01/03/2005 and 01/04/2005 it should return all the records.
However if I enter the date range between 01/01/2005 and 30/04/2005 it works fine. It also works if I enter 01/01/2000 and 31/05/2005 - it just doesn't seem to like the year 2004!!!
The problem occurs whether I enter the parameters from the form or simply type them into the criteria of the query. Any ideas, it's driving me nuts!!
I'm a beginner to Microsoft Access, and I just started working on a project for a marketing company I work for. I have to build them a pretty straightforward database which has tables including Clients, Contacts, Vendors, Employees, Timesheets, etc. The point is to have any employee be able to work with the database and enter any piece of information they have into it. Again, it's a pretty straightforward database. Right now, I am working on a search form for specific jobs. For example, if they need to design a website for a particular company, that specific website job will be entered into the jobs table. I am working on the search form right now so that they can search for specific jobs and they will come up.
One of the sections of the form is a date range, for date received. For example, this would apply if they wanted to search for all jobs that they received between 1/1/05 and 7/10/05. In the query that I am designing for this form, I have the table entry "Date Received" apply to both of the two boxes in the form (I titled them "What Date Received 1" and "What Date Received 2"... my boss advised me to title the boxes in the search forms "What ___" to not get them confused with the forms displaying the information). In the query, the code I am using right now for Date Received is this:
Between [Forms]![Search Jobs]![What Date Received 1] And [Forms]![Search Jobs]![What Date Received 2]
I've also tried this code:
(Between [Forms]![Search Jobs]![What Date Received 1] And [Forms]![Search Jobs]![What Date Received 2]) Or IsNull([Forms]![Search Jobs]![What Date Received 1]) Or IsNull([Forms]![Search Jobs]![What Date Received 2])
The first code works if I have things entered into these boxes. However, if I try to search and leave these blank, I never get any results. I tried playing around with some "IfEmpty" statements, but none of those worked. The second code doesn't work either. Does anybody know how I should modify this statement so that if the "Date Received" boxes are empty, it just ignores it? Thanks a lot.
I am wanting to use a query to find dates within a range, like a quarter. Within the criteria I put "[Enter Date:]". I ran the query and tried the "Between..And.." operator and even "<=9/1/05 and >=12/31/05". All I get is an error message saying incorrect syntax or structure. Any questions on how I could set this up so I could perform this search, that would be great.
I am trying to run a query on a table [tblMain]. I have an input form where the user enters a date range. I would like to count the Month to Date Sales. The month would be that of the end date (forms!frmflash!enddate). How could I count the number of sales between the first of the month and the end date? Each record has a salesdate1, salesdate2, salesdate3, salesdate4, salesdate5, and salesdate6. I need to look in each of these fields and count the sale if it is between the 1st of the month and the enddate.
Can someone please help me with this? I have an Events form which has some date fields setupdate and enddate. There is a linked events calendar subform attached. I have attached the database for you to see.
If you open the events form and go to the events date tab, I want to be able to type in the dates in the setup and end date fields, and then run a query which populates the events calendar subform. I created a date table (dates) with a list of dates and tried to create an append query (Query3) with those fields as criteria which didn't work as it wasn't recognising the parameters (but i'm guessing that is because it wasn't attached to the Events Form). However after entering the dates, I was able to append them to the events calendar only after including the EventsID field to the dates table and the query. This however means that the records aren't linked to the Events table as the EventsID field is blank (the EventsID is what links the E.Calendar subform to the Events Form). Therefore though the records were reflected in the events calendar form, it wasn't showing up on the events form.
I dont know if this makes much sense but what I basically want to do is a series of functions. Create a query which extracts a set of dates based on criteria entered into the main form, and appends them to a datasheet subform which is linked to the main Events form via the EventsID, then copies the Event ID for all the recordsets that have been added.
Is this possible? Thanks for your help in advance.
I was wondering if anybody could help me out with a query problem I've been having. I've been trying to use a query to display a list of available cars for a given start and end date entered by the users. I have found some guidance to make an attempt but it isn't working. The text in the Input boxes isn't what I'd like. Also the query is displaying all the cars in my database even when I deliberately trying to exclude some. I'd really appreciate any help As this is my first database and Im really struggling with the use of criteria. I've included a screen grab including my formulas
