I want to verify that the [#Closed Date#] is not less than the [#Initial Date#] in a Form.
=IIf([#Close Date# <#Initial Date#],"Error in Date",[#Close Date#]) This does not work. What do I need to do to prevent this kind of input error?
Basically i have a booking system and on certain days i need to allow an "extension", to do this i am using a yes/no and a check box. I need to creat a validation rule so that the box is only tickable if my Event_date field is a friday or saturday.
Do i need to use something like Weekday(Date()) = ?
Hi guys
i had developed report which, pops up form to pass on info to generate report.
in that pop up box i have StartDate and EndDate.
The start date should not be Null
The end date should not be Null and greater than start date.
otherwise through message.
Can anyone help me
Thank you
I am a doctor working in Sri lanka wanting to use access to make our clinic work faster. Only fields required are clinic number (Unique), patient name and last clinic date. What i want is
1. In the form when i enter the clinic number the name should come up where i need to confirm to proceed.
2. Once a patient has come to the clinic that clinic number cannot be entered till 4 weeks are past!
I tried and tried to write macros or vb...(i'm a novice in these) but failed.
This looks simple though. Can anyone help? any suggestion welcome.
ps:- this is a charity work. i'm not earning money from making this database!
I'm sure this is on the forum somewhere but have searched and searched... and had no luck.
I want my date feild to be set to enter a date no more than 2months in advance but a minium of a week in advance.
I have done this lol
week(1)<"">month(2)
I don;t actually have a clue, do you use "" to represent the value? also how do i do this date verify thing :P.
Thanks in advance
I have code in a BeforeUpdate subroutine of a text box to validate the date. The user can choose to keep or discard the value but the warning only appears if the date is in the future or at least a month old. This is my code:
Private Sub txtDate_BeforeUpdate(Cancel As Integer)
Dim dtCurrent As Date
Dim objResult As VbMsgBoxResult
If (Trim(txtDate) = "" Or IsNull(txtDate)) Then
Exit Sub
End If
objResult = vbYes
dtCurrent = CDate(txtDate)
If (dtCurrent > DateTime.Date) Then
objResult = MsgBox("This date is in the future. Are you sure you wish to leave this value?", vbYesNo, "Warning")
ElseIf (DateDiff("m", dtCurrent, DateTime.Date) > 1) Then
objResult = MsgBox("This date is at least one month old. Are you sure you wish to leave this value?", vbYesNo, "Warning")
End If
If (objResult = vbNo) Then
Cancel = True
End If
End Sub
It works fine when I answer "Yes" but if I hit "No" I get this message: The value in the field or record violates the validation rule for the record or field.
This control doesn't have a validation rule. In fact, there are no validation rules in any of the controls on this form nor on any of the attributes in the control source (table). The date is a required attribute of the table though. I can't hide this extra error message by turning off warnings because it happens after I exit the subroutine, so I wouldn't be able to turn the warnings back on. I also can't trap this error because it occurs after the subroutine ends.
If possible I would want the text box to be cleared and be focused if the user selects "No" to discard the date.
I have a date field in a table which is Short Date with an input mask of 99/00/000;0;_
I do not want (for reasons too complicated to go into here) to put this as a required field even though it is a required field (makes sense from my end!).
If I set Required Field to "No" what format can I put in the validation rule field so a message (from my validation text field) comes up if the field is left blank??
I have a table with 2 field:
1. StartDate (format : Short Date)
2. EndDate (format : Short Date)
How can I validate for field EndDate must occur after StartDate using Validation Rule?
I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"
This rule works when the data type is set to text, but not on Date/Time with short date set as format
How to get a Date/Time type to accept only one from these four values.
Basically, i have a field where the expiry date of a credit card is input, but i want to set an input mask so that it loks something like this:
MM/YY but i cant find a way of doing this!
I then have validation text which makes sure that this value is either equal to or more than todays date! this looks like this:
>=int(now())
So the input mask has to accept this validation...
If you could help, i would be very greatful!
Cheers
I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"
This rule works when the data type is set to text, but not on Date/Time with short date set as format
get a Date/Time type to accept only one from these four values.
If a new record is created, insert date only if customerID is not null
Private Sub Form_Current()
If "CustomerID", "TblDietPlan" = <> 0 Then
If Me.NewRecord Then Me.MealDate = DMax("MealDate", "TblDietPlan")
End Sub
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
I'm trying to get my "IncidentDate" field to autopopulate two other date fields to a few days from the "IncidentDate". The other two date fields are "ContainDueDate" and "RootDueDate". I'm trying to accomplish this on my "Test CAP Form"
I tried using the following in the BeforeUpdate of "ContainDueDate" and received a complier error: expected =
Code : DateAdd(d,2,[IncidentDate])
so I removed the parenthesis and nothing happened
Code : DateAdd d,2,[IncidentDate]
I even tried redoing it in the AfterUpdate of "IncidentDate" and nothing happened either
Code : DateAdd d,2,[ContainDueDate]
I'm not sure if I'm even using the right function to get what I want.
how can i validate a field so that the data entered must be between the values of 1 and 10?
thanks in advance
I have a table called Inspection, there are two fields:
- Damage To Property // data type is Yes/No
- Damage Comments // data type is text
How would i go about setting the validation - if Damage To Property is data type "No", disable the "Damage Comments" field. (ie grey it out).
any help would be greatly appreciated..
Hello!
Can someone tell me how to do a validation. The one I am trying to do is check Track No is not duplicated.
I have added my database if you may need it.
Can someone help me please!
Thanks
Hey peeps,
I have a problem. I want my field to become "[field], An " etc. when I type "An [field]" For example, if I type "The Hundred Years War" for the field, it automatically updates to "Hundred Years War, The". I would be happy with a simple validation rule that prohibits the use of "The, A or An" in the beginning of the field but i don't think that is posibble. If this requires VB, I don't know how to use the language and never worked with it. I am completely a novice in VB, but would still love to learn how to make it. :) If you could start me out then, I would appreciate it greatly. :D
Hi im new round here but am working on a database and sum of the validation rules are confusing me now.
Ok i got a couple of things to ask:
1) What rule do i use to make sure only text is entered into the field, i cant use input masks as the size of the text put into the field will vary, as its names of people.
2) Is there a way to check that all the fields on a form have been entered? So if there not all entered an error appears?
3) Finally, is there a way to reset Autonumbers? or do i have to delete all the records and start frm scratch as my autonumbers have gone abiit crazy as sum records have been deleted so my table looks rather strange.
Thank you, help greatly appreciated :)
Need a a validation rule to allow only "a" or "p" to be entered as data into the relevant fields, can someone help?
View 2 Replies View RelatedIs it posible to use a iif statment in a validation statment ?
i have one table project and i want to check the occurens.
IIF ([ProjectStatus] = 1 ,[ProjectCompletedDate] = NULL, [ProjectCompletedDate]<> NULL)
when the projectstatus is 1, the date cant be filled in.
is this possible in access ?
or can it only be done form based?
thanks for the reply :)
I have 2 fields called confirmed and paid.
I want to have a validation which will only allow confirmed to be clicked when paid is selected. I put this validation "Confirmed"<"Paid" in the properties part of the table but it doesnt work.
Can anyone help?
Hello,
For my Year 12 Computing course, I need to develop a database which will take bookings for a village hall. The database consists of a Bookings Table, a Customer Data Table and a Hiring Cost Table. It is in the Bookings Table that I am having the most trouble.
I believe I have already solved my double booking dilemma by making the Date of Event and Type of Event fields in the Bookings Table into a composite key, thereby prohibiting the entering of data where Date of Event and Type of Event are the same, making them unique.
Here is my main problem at the moment, I need a validation rule on the Date of Event or perhaps the Date of Booking field which means a booking must be made at least a week, and no more than two months in advance of the date of event. The thing is this validation rule is only needed for occasional bookings. Present, again on the bookings table is a Booking Type field which has a lookup consisting of the following “Regular” and “Occasional”, regular meaning bookings that are made at the start of the year, for the whole year.
Ideally, I would like to have it so that when the booking type field is set to regular, the validation rule for the date isn’t needed, and when the booking type field is set to occasional, the validation rule for the date is needed/present.
Could anyone help me with this? As any help would be much appreciated.
Many thanks
Daniel
If anyone would like any screenshots of the Bookings Table, email me at daniel_goodman@hotmail.com
How can I set validation for a text field where I restrict the number of characters? For example, if I only want the user to be able to input 12 characters or less, and more than one. >=1 And <=12 would that be correct?
View 1 Replies View RelatedHello!
I'm really new to Access and need help with a validation rule
Right, i have a 'Date of Birth' field and what would the validation rule be if i only want people over the age of 12 to be able to go any further?
I've tried various other rules found online but some just don't work...
Any help would be great!
Thanks
Hi all, Very new to using ACCESS. I am trying to set a validation criteria to ensure that a postcode is imported correctly. An example of a UK post code is SP10 3PB - it may be entered as SP103PB. I need to set a validation criteria to allow either two. What is the format of the criteria to achieve this? Any clues please. Thanks Mike
Are there any useful sites that set out examples of validation criteria?