Date Format Issue In Where Clause
Jul 4, 2005
Dear all,
I have a WHERE clause I'd like to parametrise but I'm getting some overflow problems when I want to do this.
Original where clause (which was working ok was) :
strWhereClause = " where (((" & strTablename & ".bg_detection_date) > #8/JAN/2005#)) and (((" & strTablename & ".bg_detection_date) < #8/JUL/2005#))"
Now I wanted to parametrise the where clause so that a period of 6 months is taken, initially I used this :
strWhereClause =" where (((" & strTablename & ".bg_detection_date) > #" & DateAdd("m", -6, Date) & "#)) and (((" & strTablename & ."bg_detection_date) < #" & DateAdd("m", -6, Date)
I experienced that when I executed this it ran well but the month and date were inverted so that I had much less results than I should have got.
Therefore I started changing the syntax adding some format function, unfortunately this results in overflow errors. Eg. : this one gives an overflow :
" where (((" & strTablename & ".bg_detection_date) > #" & Format(DateAdd("m", -6, Date), d / mmm / yyyy) & "#)) and (((" & strTablename & ".bg_detection_date) < #" & Format(Date, d / mmm / yyyy) & "#))"
Can anybody advise me on how to change the syntax of this where clause in order to avoid the overflow error and get the correct results ?
Thanks !
Jan
View Replies
ADVERTISEMENT
Feb 17, 2014
I wanted to assign the field "Number of magazine" with special format based on date/time format but showing only year and month in the format: "yyyy-mm".
So in property of this field in format I put yyyy-mm and in input mask I type 0000-00;;-
I also created the form based on the table containing above field and I defined format and input mask for corresponding formant in the same way like at the table.
But if I try to type date for example 2014-01 in text box of the form it comes up with the full date 2014-01-01. Why does it do like this? What do I do incorrectly?
View 2 Replies
View Related
Jul 21, 2015
I would like to open a form to a specific date that is taken from another form. Date field format is short date and looks like yyyy.mm.dd
I have figured it out that it only works if date format is yyyy/mm/dd
I know format function can do this, but i do not know how to write the code with correct syntax.
For example i have tried:
DoCmd.OpenForm "TreatmentsTB1", , , "DOV= #"& Format(2015.01.11,"yyyy/mm/dd")&"#"
it does not work.
View 3 Replies
View Related
Jul 30, 2013
I have a list of dates in the mm/dd/yyyy format and I am looking to get it into the fiscal format of yyyyww. I am able to do this with the datepart and format functions, but I need to make it so that the fiscal month begins in January but the first week starts if there are three or more days in the week. For instance if Jan 1st is a Friday then this stands as the first fiscal week, if it is a Saturday then it does not count as the first week.
datepart and format functions have the Use the first week in the year that has at least 4 days for the firstweekofyear option but I need it where it has at least three to make it work.
View 2 Replies
View Related
Sep 20, 2013
Using access 2010; i have a form that includes a date field. Is there a way to force the user to only choose a month end date? When the user clicks the date from the popup, they may use 9/1/2013 when the mgr. want them to use only 8/31/2013. I am thinking validation field to put a msg but want to be able to force it not the option.
View 2 Replies
View Related
Mar 10, 2006
I have a date and time stamp in a Date/Time field of General Date format (3/1/2006 7:52:25 AM).
I wish to select query on the table's Date/Time field by date portion only (3/1/2006) and not include the time portion (7:52:25 AM) of the field.
Using this expression in the query's criteria - "Between [Enter Start Date: (MM/DD/YY Format)] And [End Date: (MM/DD/YY]" will not return the date ranges as desired without also typing in the full time string.
How can the date integer be parsed out and the query properly expression ed on the criteria field without using VB?
View 7 Replies
View Related
Jul 16, 2014
On my report, I want rows with expired dates to stand out by having their borders thicker. Something like:
Code:
If Me.txtDate < Date() Then
Me.txtDate.BorderWidth = 6
End If
When I do that, it ends up formatting every txtDate field in the report if one of them passes the If criteria instead of only ones that are expired.
View 7 Replies
View Related
Apr 2, 2006
The date format from one of my access tables is as follows:
11051977
9101978
and I need to amend to following formats within my select query:
11/05/1977
09/10/1978
I have tried using formula:
Date of Birth: DateValue(Mid([DOB],7,2) & "/" & Mid([DOB],5,2) & "/" & Mid([DOB],1,4))
that results in an #Error messages
Can anyone help?
Thanks
View 8 Replies
View Related
Nov 1, 2006
Hello
Can someone help format the date correctly? I'm currently linking a flat file in access and then creating a table afterwards. The date comes in the following format below:
i.e. 30102006 - txt type
I wanted the date to look like - mm/dd/yy. Thanks for the help.
View 6 Replies
View Related
Feb 24, 2007
I have a date field in my table and my computer date is set as a custom long date, if I enter 24/2/07 in my date field when I press enter and move to the next field it is displayed as Saturday 24 February 2007 but when I select the date field again it reverts back to 24/2/07. I include the date field in a merge with a word document and would like the date displayed as Saturday 24 February 2007, but the merge is displayed as 24/2/07. Can anyone help with how to merge the date as Saturday 24 February 2007?
View 4 Replies
View Related
Aug 30, 2007
Hello,
I have two pc's, both with Windows XP SP2 and Office 2003 SP2 (dutch) and the same input locales. I made a program in Access (connected to a MS SQL Server) where dates are stored. Now I want to built a report with a daterange. Because of the dateformat in SQL I made a function to convert the date because they enter it in Dutch format. The function is:
Function DatumSQL(datDatum As Date) As String
DatumSQL = "#" & Format(datDatum, "mm") & "-" & Format(datDatum, "dd") & "-" & Format(datDatum, "yyyy") & "#"
End Function
This works great on computer 1. But not on computer 2. On the second computer the date is converted again. When I don't use the function it works fine on computer 2 but not anymore on computer 1.
I searched for differences and found that on computer 1 the files in the map C:Program FilesCommon filesSystemado are from 3-8-2004 and on computer 2 they are from 2-3-2006.
How can this happen? And what is the solution?
I hope someone can help me.
Thanks in advance.
Benno
View 4 Replies
View Related
Apr 4, 2008
I have a date field with a format of 'Short - dd/mm/yyyy'. All of the data stored in that field is in that format.
I have a listbox that displays all those dates. I select a date, then click on a button to filter the form by the date selected. Here is my code that fires on the cmd_Click event:
Forms!frmPondSampling.Filter = "RPID = " & Me.cboPondID & " AND Date = #" & Me.lstDate & "#"
Forms!frmPondSampling.FilterOn = True
This works for dates where the dd is more than 12, but it wo't work when the dd is less than 12. I'm assuming it is getting the dd and mm mixed up, but all my data is correct and matches the field type.
View 3 Replies
View Related
Dec 21, 2006
I am trying to find a date format and superised that MS doean't offer this feature. The format I am trying to set setup is this: 01/01/2006. Right now, all I can do is to set it up by the befault setting of 1/1/2006 and is not what I am looking for. Is there a way that this format can be modified?
View 11 Replies
View Related
Mar 14, 2006
I am trying to run a query that someone already established/saved. It asks for beginning date and end date. I have tried a few different formats but I cannot get the query to run. I have tried the date as 1998,01,01 for beginning and 2006,03,14 for end. i have tried also 01-01-98 and 01-01-1998 etc. I keep getting the same error that the date is too complex or something. Can anyone help me?
View 7 Replies
View Related
Jan 13, 2008
Using MS Access I have the following SQL for a selection query:
SELECT qryOfferteAfdruk.pkOfferte, qryOfferteAfdruk.Nummer, qryOfferteAfdruk.Datum, qryOfferteAfdruk.Bedrijfsnaam FROM qryOfferteAfdruk WHERE [qryOfferteAfdruk.Datum] Between #08-01-2008# And #12-01-2008# ORDER BY qryOfferteAfdruk.pkOfferte DESC
The problem is that the 'between' dates should have dd-mm-yyyy format, but once the query is executed the format is mm-dd-yyyy. I do not understand why, because in the control panel of Windows I selected dd-mm-yyyy and in MS Access I selected the standard date format, being dd-mm-yyyy.:confused:
View 3 Replies
View Related
Nov 17, 2005
Hello,
This is problably a very simple question; however, I can't find the way to do it.
I have a field in a form that its default value is today's date: Default value: Date().
As you know, it always appears as dd/mm/yyyy. Is there a way to change it and instead to appear as mm/dd/yyyy ? I am sending this field to some reports and an error is appearing as in the database dates are stored as mm/dd/yyyy
Thank you!
View 2 Replies
View Related
Dec 2, 2006
I using a auto date in a table and want it to display differently in a form.
How do i do it?
View 2 Replies
View Related
Sep 27, 2004
I have control sources set up in a report as follows:
=DateAdd("d",0", Forms!frmDates!txtEnd
=DateAdd("d",1", Forms!frmDates!txtEnd
=DateAdd("d",2", Forms!frmDates!txtEnd
=DateAdd("d",3", Forms!frmDates!txtEnd
=DateAdd("d",4", Forms!frmDates!txtEnd
...etc...
They are coming up with a mmddyyyy format. I'd like to only show the dd part. Is there a way to do this in the report, or do I need to go back into my SQL query to do it?...
View 3 Replies
View Related
Jun 6, 2005
I have a form where i am inputting dates.
The short date format is MM/DD/YYYY, but i can't find a way to put it DD/MM/YYYY
Can you please help?
View 2 Replies
View Related
Jun 6, 2007
Hi, I want to make a default value for the date when a record is inserted. I don't want to use Now() or Date(), I want to use one that only displays the month eg: "June" and that is all. Any ideas? Many thanks.
View 1 Replies
View Related
May 3, 2005
Hi All,
The following code is supposed to insert a date formatted as dd/mm/yyyy into a table, when i view the mySQL string in the debug window it shows the correct format, however when i open the table it displays the date as mm/dd/yyyy.
The table's date field userdate is formatted as a short date field with an input mask of dd/mm/yyyy.
My computers date settings are set up as dd/mm/yyyy as well
Any ideas on hows to correct this?
Thanks in advance. :)
Public Function Test()
Dim mySQL As String
Dim dtDate As Date
Dim db As Database
Dim qdf As QueryDef
Set db = CurrentDb()
dtDate = Format(Now(), "dd/mm/yy")
mySQL = "INSERT INTO tblCurrentUser( userdate ) values (" & "#" & dtDate & "#" & ");"
Debug.Print mySQL
'*The debugger shows* INSERT INTO tblCurrentUser( userdate ) values (#04/05/2005#);
' However the value in my table tblCurrentUser is05/04/2005 is in mm/dd/yyyy format
Set qdf = db.CreateQueryDef("", mySQL)
qdf.Execute
End Function
View 3 Replies
View Related
May 10, 2005
date in database is change position for month and day (mm/dd/yy---dd/mm/yy).
So when i try to read data and calculate date i have problem becouse some of date (until day is less then 12) mm/dd/yy, and when day is more then 12 format is dd/mm/yy.
What to doo?
I use access database with .asp for web application...
:confused:
View 4 Replies
View Related
Oct 20, 2005
Hello,
I have a column with a dateformat as follows: 01-Jun-05 or 01-Aug-05.
Now, I would like this date to be shown as Jun-05 or Aug-05, but still as a dateformat.
Can you please advise how to do this?
Thanks!!
Frank
View 1 Replies
View Related
Jul 15, 2006
Dear all,
Question for you all.
My Microsoft Access have:-
Contract start date
Contract end date
Status of combo box - Active, Expired
I would like the combo box can automate base on contract end date. Question here. The combo box only auto change to "Expired" once month end reached.
Example:
Contract start date 01 Jul 06, Contract end date 25 Jul 06. From here, I do not want the combo box base on system date to change it to "Expired". Only when the month end reached, system will auto change it. For your information, not only 1 record, I have 100++ of records & start from different contract date.
Appreciate your help.
Angie
View 1 Replies
View Related
Feb 14, 2007
Hi,
I am creating a data entry program for data being collected from Bangalore, India. My problem is the date formats in India are "DD/MM/YYYY" as opposed to the US format of "MM/DD/YYYY". When I apply the dd/mm/yyyy format to my table design and also to the text box on the form, the format works except for say May 2, 2006, which would be entered as 02/05/2006. As soon as I move to another control Access flips the days and months to 05/02/2006. If I modify the format to dd/mmm/yyyy Access tells me the date is 05/Feb/2006. How can I get Access to stop 'helping' me and only take the data as it is entered and formatted, short of splitting the date fields.
Sidebar-Personally, I always feel that dates should be entered with a three character month, because of confusion that can be generated when using strictly two digit days and two digit months when both values are 12 or less.
View 8 Replies
View Related
Feb 19, 2007
I saw a thread once that explained how to format a date or phone number field after you've entered the data, but I can't find it again.You do it so that you don't have the __/__/__ or the ___-___-____ pop up in the field and don't have to worry about inadvertently starting typing the data in the middle of the field instead of the beginning.Anybody know where that thread is at, or know how to do that?
View 2 Replies
View Related
