Date() Function With SQL Script
Aug 4, 2006
Whenever I try to do an insert using the Date() function the date always shows up in the field wrong. It shows up as a time (12:00:09 AM) instead of the date. I have the field setup as a Short Date and I have tried many other formats.
What am I doing wrong?
See script below.
"INSERT INTO tblOneTimeJobs ( CustomerID, OTJobDescription, CreateDate, CreatedBy ) " & _
"SELECT tblCustomers.CustomerID, '" & Me.txtOTJobDescription & "', " & Date & ", " & CurrentID() & " " & _
"FROM tblCustomers " & _
"WHERE (((tblCustomers.CustomerType)='2'))"
View Replies
ADVERTISEMENT
Jun 9, 2005
We have a date function that converts a text date format. Can someone help me with time function to do the same thing? We want military time. The field is like this now: txt fields.
160037
213137
224356
235716
235800
12341
21708
22732
Here is the date function we use:
Function f2Date(strDateOld As String)
Dim strDate As String, strMonth As String, strYear As String
strMonth = Mid(strDateOld, 5, 2)
strDate = Right(strDateOld, 2)
strYear = Left(strDateOld, 4)
f2Date = strMonth & "-" & strDate & "-" & strYear
f2Date = CDate(f2Date)
f2Date = Format(f2Date, "mmmm d yyyy")
End Function
View 9 Replies
View Related
May 25, 2006
Hi all,
I need a little help. In my DB, I have a command button set up (I was tired of typing in dates) for date, but I used the Now function, which also gives me the time.
Now I have over 3000 subrecords of the main ones. I now need to queries transaction for that specific date, but it also retrieves the time.
I tried to go back and change the NOW to DATE in VB, but the code does not run.
How do I change all records that have date and time (using NOW function) and only click that command button to show only the date (mm/dd/yyyy)?
Thanks in advance.
View 1 Replies
View Related
Jul 26, 2005
Hi Folks,
I know this is possible, just not sure how to proceed or what function to use ... I have a normalized database of unique identifiers, admit data, and discharge date. I am attempted to count only the dates within a certain range between admit and discharge dates for each record. For example, I would like to compute the number of days someone was in admission between #07/01/03# and #06/30/04# only, not counting any days outside of that range.
So if a record has an admit date of 5/3/00 and discharge date of 12/7/03, the value returned would be 159 days, because that is the number of days between #07/01/03# and #06/30/04# the record was enrolled. If a records admit date is 01/01/01 and discharge is 07/26/05, the value returned would be 365 days.
Any ideas?
Thanks,
Joe
View 2 Replies
View Related
Aug 2, 2007
Here is what I'm trying to do.
I need a function which takes the current day and finds the date of that weeks Sunday.
Then I need to take that date (of the Sunday) and subtract 13 weeks from it.
This is for the criteria in a query so that the only data displayed will be the previous 13 weeks worth.
Not quite sure how to go about this. TIA for the help.
View 3 Replies
View Related
May 18, 2005
Should this work? If not is there a way I can achive it! I think its fairly self explanetry :confused:
Private Sub Form_Open(Cancel As Integer)
Me.Date2 = Now()
If Me.Date1 < Me.Date2 Then
Me.Check8 = False
End If
If Me.Date1 > Me.Date2 Then
Me.Check8 = True
End If
End Sub
View 10 Replies
View Related
May 23, 2006
Hi Guys,
Does anybody know the formula for validating a date in a DOB field.
I want it to only allow dates where the age is at least 18years old.
Something like '<Date()-18' (But a formula that works!)
Thanks in advance!
View 7 Replies
View Related
Jul 31, 2005
I made a program for litle hotel registration. It worked enoudh good for me but after changing a comuter function Date() isn't work
In Build-In-Functios Date() persist but every try to use it cose massage "The function you entered can't be used in this expression"
In some queries I change Date() with Now() but can't do this in all.
HELP
View 3 Replies
View Related
Dec 30, 2005
Since I use Access2000 my Date() function returns always the error "#name". Is there a fix for that?
I switched to using now() which is working, but it stores the date and time in the fields. Then the date searching is not accurate since the attached time increases the date by one day when I search for dates. I have to get the date() function back to work since I am also unable to format now() in a way that it kills the time portion of it. Any Ideas?
View 14 Replies
View Related
Dec 15, 2006
This function gets the last working day (Mon-Fri Are Deamed Working Days For Invoicing purposes) of a month adds it to a table then gets the next until it has done the Number indecated In "txtMonths", It works with a UK Date Format but not with a USA Date Format.
Is there A Better way of doing this or does anybody have an idear as to how I could correct it for UK and US Date Formats
Y = Year(Me![txtStartDate]) 'Get Added Year
M = Month(Me![txtStartDate]) 'Get Added month To Keep Track Of year Change
D = Weekday(Me![txtStartDate], vbMonday) 'Get Day of week and set to monday
On Error Resume Next
For C = 1 To Me![txtMonths]
DDt = CDate(1 & "/" & M & "/" & Y) 'Set to first of the month
Ld = LastOfMonth(DDt)
Nd = CDate(Ld & "/" & M & "/" & Y)
'StrSch = Ld & "/" & M & "/" & Y
CWd = Weekday(CDate(Ld & "/" & M & "/" & Y), vbMonday)
'Now If the date falls on a sat or sunday move the day back to friday
If CWd > 5 Then
If CWd = 6 Then D = 1
If CWd = 7 Then D = 2
Nd = CDate(Ld & "/" & M & "/" & Y) - D
End If
AddSchedule Nd
'Debug.Print C & " | " & StrSch & " | " & CWd & " | " & Nd & " | " & D
M = M + 1
If M > 12 Then
M = 1 'Only 12 Months in a year
Y = Y + 1 'Gotta be a new year Happy New Year
End If
Next C
Edit: Function used to get the last day of a given month
Function LastOfMonth(InputDate As Date) As Integer
' Return a date that is the last day of the month of the date passed
Dim D As Integer, M As Integer, Y As Integer
If IsNull(InputDate) Then
LastOfMonth = Null
Else
D = Day(InputDate)
M = Month(InputDate)
Y = Year(InputDate)
'find the first day of next month, then back up one day
LastOfMonth = Day(DateAdd("m", 1, DateSerial(Y, M, 1)) - 1)
End If
End Function
View 6 Replies
View Related
Aug 12, 2005
I don't get it!!!! I use it all the time. <=Date() should get all rows with no future dates...but I get this error on some of my queries...I've never got this error before... :mad: :mad: :mad: :mad:
Sorry about the poor image quality.
View 1 Replies
View Related
Mar 23, 2007
Does anyone know of a function that will change the date format from yyyymmdd to mmddyyyy? I have a linked table to a data repository, I'm using a date field in a query and would like to use the dateadd function to return a certain date range from 7 days prior. I can't get it to run, I thought this might be due to the date format.
here is what i have in the date field as the criteria: <DateAdd("d",-7,Now())
the date field is formated to yyyymmdd
Any suggestions?
View 11 Replies
View Related
Dec 7, 2004
On loading a form is it possible to Go To a record which is within 10 days of today's date?
DoCmd,GoToRecord,acDataForm,"frmClinics",?????????
View 1 Replies
View Related
Apr 2, 2008
Must admit I have always had problems getting my mind around the Nz function and where to stick it in an expression. have googled this one (as I know it is not a common problem) but to no avail
If i have a calculated field
=DateAdd("d",7,[DateSubmitted]) then how do I deal with the possibility that [DateSubmitted] may be blank??
View 1 Replies
View Related
Jun 23, 2006
Hello,
I would like to add a control on my form (textbox) that by default will always show the last day of the previous year with the format mm/dd/yyyy (ex. 12/31/2005). This should then update every new year always showing the last day of previous year (ex. next new year it should show 12/31/2006).
Any help? Thanks.
View 2 Replies
View Related
Aug 13, 2004
I have a date field (WhitesDue) that I want automatically filled in when information in another field (Conditions) in another table is entered. The field Conditions is a number field and depending on the number of conditions determines when the whites are due.
I saw the other thread, Automatic Date Function, and was wondering if it was possible to put an if then code in to have the date updated with different dates depending on the number of conditions and the date that the information is put in. For example if someone is putting information in today and they have 4 conditions then I want the date to be automatically filled in with 8/17/04 (is it possible to factor weekends in too?).
Does that make sense? Can anyone help me out here?
Okay I stepped through some code that I have in the Conditions after update event. It works, it puts the date in the code like it is supposed to. Now, how do I get it to put the date into a field on another form?
If [Conditions] > 3 And [Conditions] < 5 Then
[Whites] = Now + 2
ElseIf [Conditions] > 5 Then
[Whites] = Now + 4
Else
[Whites] = Now + 1
End If
learnasugo
View 9 Replies
View Related
Feb 14, 2008
Hi,
I'm Italian and I started playing (I don't work on it) with access to create an Airline Simulator for MS Flight Simulator. My "program" read data imported in an Access table by a secondary program, and work on it. :cool:
One or Two of my Beta testers found this problems:
1) function "date()" is not recognized in Access 2003 and 2007. in 2003 is read as "date"; in access 2007 is read "date(". The one with Access 2007 resolved the problem reinstalling the Office Suite 3 times. The third was working. nothing else changed. :mad:
2) Access request the OFFOWC.DLL, in an Access2003 version. But only one user... and that .dll is from Access 2007!! :confused:
I wrote the database in Access 2007 and in Access 2003, the file is obviosly Access 2003 format.
I attach it here, for someone that wanna try if he has the same problem. PS due to size of the file, it's a zip containing a .rar file, that contains the .mdb (zip only was 660 Kb)
Do you have some indications!? Thanks a LOT!! :)
Lorenzo.
View 1 Replies
View Related
Jun 12, 2014
How to amend the below, so that instead of doing 4 days, it does 4 working days?
<=DateAdd("d",4,Date())
View 5 Replies
View Related
Dec 8, 2012
I've been using between function with two dates in query and also have put event. There is no mater to display it's event at the start and end date, but if the different date more than one day, for example:
Query 1:
Start Date
End Date
Event
Amount Days
24/04/2012
27/04/2012
Leadership Course
4
the report only display the first and last date with it's event but not display date to 2, 3 and 4. While actually what I want to do in the query when I key in even at the start and end date, the result in a report should display every single date with it's event automatically.
View 1 Replies
View Related
Jun 13, 2007
Let's see if I can explain this situation effectively...
I've been handed a database that is set up to track tutoring sessions of students. The original creator designed the database for 1 semester. I am trying to make it functional for x number of semesters. So here's my dilemma: I have several reports that are based on queries. I would like for the user to be able to run the report and it prompt for them to enter a date range, which would then output desired results for that range (I thought this would be more efficient than setting up the db to run reports by semester, so that the user would be able to narrow their results).
So in corresponding queries, I am adding the following criteria to the "Date" field:
Between [Enter Beginning Date] And [Enter Ending Date]. The query produces the right results, just not exactly in the way I would like to see them. This is because the query tracks the number of hours per mentor (the person giving the tutoring) and does a sum.
So in my results, it is summing the hours for every change in date occurrence. For example, the results should look like this (on the report):
Student 1
Mentor A xtotal hours
Student 2
Mentor A xtotal hours
Mentor B xtotal hours
Instead what I'm getting is a sum of hours for every different date, as follows:
Student 1
Mentor A xtotal hours
Mentor A xtotal hours
Mentor A xtotal hours
Student 2
Mentor A xtotal hours
Mentor A xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
And so on...
Maybe I'm approaching this is the wrong fashion? I haven't had much luck searching google or access help... maybe I'm searching with the wrong strings. :)
Any advice would be greatly appreciated.
View 6 Replies
View Related
Sep 25, 2014
I m using Access 2010.I m Facing a problem in the undermentioned expression,
OPB: 1*Nz(DSum("[Trans]","LogDetail","[LocationID]='" & [LocationID] & "' AND [ProductID]='" & [ProductID] & "' AND [LogDate]<#" & Format([FromDt],"dd-mm-yy") & "#"),0)
when i run the query it gives "Undefined Function 'Format' in Expression" ?
View 3 Replies
View Related
Aug 7, 2014
I'm using the following function to calculate date diff in network days (excluding weekends)
Public Function NetWorkdays(dteStart As Date, dteEnd As Date) As Integer
Dim intGrossDays As Integer
Dim dteCurrDate As Date
Dim i As Integer
intGrossDays = DateDiff("d", dteStart, dteEnd)
NetWorkdays = 0
[Code] ....
So when using this function in a query to get number of networkdays between 2 date columns ...it works fine but throws a #Error where there is blank entries in either of 2 date columns...
I need to find a way to display Null instead of #Error...
I have tried this expression but no luck...
IIf(IsError(NetWorkdays([Date1],[Date2])),"",NetWorkdays([Date1],[Date2]))
View 7 Replies
View Related
Jan 10, 2013
I have created user defined function for lastdayofweek, lastdayofmonth, and firstdayofmonth. When I apply this function to an expression in my query, it returns a julian date. How do I apply the format for the calendar date?
Maybe I am not calling my function correctly. Here's my functions below as well as my expression..
Function LastDayThisMonth()
LastDayThisMonth = DateSerial(Year(Date), Month(Date) + 1, 0)
End Function
Function FirstDayThisMonth()
FirstDayThisMonth = DateSerial(Year(Date), Month(Date), 1)
End Function
[Code] ....
View 3 Replies
View Related
Jan 20, 2014
Looking to have a count function which calculate data in sense like if records found on 1-jan-2014 the it give answer as 1, same as records for 2-jan-2014 it should return 2 and so on .. in short the criteria must look and give same number for same dates starting from 1
View 8 Replies
View Related
Jun 5, 2014
Is there a function I could use to find the date listed in the "date created" property of an Access file?
View 4 Replies
View Related
May 31, 2014
I have a table with only two fields and one record: BegDate and EndDate (beginning and end date of the reporting period respectively). I also made a function with variables that look up those values for use as a date parameter in a query.
Here is the code:
Option Compare Database
Option Explicit
Public Function getCurrentRepDates() As Date
Dim dtBegDate As Date
dtBegDate = DLookup("BegDate", "tblCurrentRepDates")
[Code] ....
I am getting a syntax error for the line marked red. How can I use "Between" function in VBA code? Access 2010
View 5 Replies
View Related
