Default Page
Jan 17, 2007Hi there..
I have an access 2003 database. Properties are set as whenever open it a default form appears. I want this to be changed to some other form.
Please Advice.
Thanks
Danny
ADVERTISEMENT
Data Access Page-Default Value
Apr 5, 2006Hi All,
I've made a data access page which is in data entry mode. One of the fields is a date field which I have set the default value as =Date(), but it only inserts the default value when you move to a new record it doesn't put it in on the initial record.
Any ideas?
Cheers
Forms :: Labels In Page Header With Continuous Default View
Apr 8, 2015I created a form with a continuous default view and created labels in the page header of the form. When I view the form, I can see the data from the form detail, but the lables in the page header do not appear. Why can't I see the labes in the page header ?
View 3 Replies View RelatedReports :: Breaking To New Page If Subreport Cannot Fully Print On Current Page
Nov 12, 2013I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedSection Header At Bottom Of Page And Detail Lines On Next Page
Nov 22, 2004I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
Reports :: Page Header - Don't Display If No Detail Records - On Last Page
Jun 13, 2015If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Data Access Page Filter Refresh The Page
Dec 30, 2007Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
Forms :: One Page Form Printing Blank Second Page
Oct 21, 2013I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedReports :: One Page Report Showing Second Blank Page
Apr 20, 2014I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedReports :: Footer To Bottom Of Page Or Page Footer To Last Page Only
Oct 23, 2014I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
How To Continue A Form Page After Page Automatically
Jul 9, 2005to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Calendar On Page 1 Also Displaying On Page 4 Of Form
Sep 3, 2006Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
Reports :: Page Footer To Print On The 1st Page Only
May 17, 2013I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
Reports :: Generate A Blank Page After Every Page
May 23, 2013I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
Default Combo Box Based On Default Table Value
Feb 13, 2006Hi Everyone,
I hope someone can help.
I have a form with a combo boxes and a table with relevant list and additional field, fldDefaultDrive (Yes/No Field).
Currently in order to set the default value, I have used the following code for each default;
Private Sub Form_Load()
Forms!frmMediaLabeller!CboDriveName.DefaultValue = """D"""
End Sub
However, I want users to be able to go into the table and change the default value if thier CD player default Drive is anything but D: Drive. I have tried to replace the D above with an SQL statement but with no success.
Private Sub Form_Load()
Dim Drivename As String
Drivename = SELECT tblMediaDrive.fldDrivename FROM tblMediaDrive WHERE (((tblMediaDrive.fldDefaultDrive)=-1));
Forms!frmMediaLabeller!CboDriveName.DefaultValue = """Drivename"""
End Sub
This is definetly not working, can anybody help, I have a feeling it is syntax but not sure where? :confused:
Robert88
Going From Page To Page In A Tabbed Form
Oct 25, 2005I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies View RelatedReports :: Dates To Go Across The Page And Not Down The Page
Mar 11, 2014I am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
Page Numbering Multiple Reports With References To Page Numbers In Other Reports
Sep 24, 2004I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
Please Help - Web Page
Nov 30, 2005Hi, I have designing an internal works database to hold projects. My question is this; I want to display data on a web page, for example to list the projects directly from the database tables (so other people can view the projects that are outstanding).
Does anyway know where I can find an example of this or do you know of a website that shows you a walkthrough on how to do this.
Thanks.
Page Set Up
Jun 13, 2006I made a couple of reports.But when I want to view or print them,default page set up is for Portrait,I want Landscape.Each time I open database i have to go to Page set up and change it .Is there a properties where I can change it pernamently??
View 1 Replies View RelatedWeb Page Instead Of Form
Apr 24, 2006Hi
Does anyone know a basic and quick way to write to a table in a database using a web page instead of a form? the webpage is stored locally as is the database
Thanks
Ben
Page / Sub Form
May 5, 2005hi
have a page with all my main fields, now i would like to create a sub form and put some of these fields on it.
i tried copy and pasting but a few of the scripts show errors.
im not sure hoe i can transfer exsisting fields onto a subform,
im guessing ive done this the wrong way round should have designed a sub form and then put the fields on
Opening A Web Page
Dec 26, 2005Hi,
I have made an application in access 2000. So what I have, 2 text fields and one button. I would like that when I click the button that access visits a site like this:
http://website.com/test.php?ID=5&NUM=23
where 5 and 23 are values from my fields in my form.
Any ideas.
regards
Web Page On Access
Feb 7, 2007Can anyone explain me what is the use of a web page on access so for me to take advantage of it?
Thanks in advance
Switching To A New Page Using TAB Key
Aug 27, 2007Hi all, is there a way to make the TAB key switching to the next page of a tab control? Thanks!
View 3 Replies View RelatedWeb Page On A Form
Apr 11, 2005hi folks,
How do I open html based help file from an access form? I've looked at access help, but it only shows how to put the control on the page, and not how to link the control to the webpage? I'm missing somehting here if someone could help please?