Hi, I have a form to which I update the information and hit a command button. Now this data has to be transfered to another form and get deleted from the original form. To acheive this I used Append and Delete Query(Both working). I have no problems assigning Append Query to a command, but I couldnt assign a delete query to a command button. I cannot see Delete query while trying to assign using a command button wizard. I even tried with an Build event while designing but its of no use. Can anyone help me with this issue????
All I am trying to do is insert to have a form with a "Delete Record" button on it. The problem is I don't want anyone to be able to delete a record, I would like someone to have to insert a password to confirm the delete.
HI there, can anyone tell me hy I can't access/view a delete query when using the the wizard while putting a command button on a form? The delete query is working fine i application mode. thaks in advnace Chris
I have another delete query that I wish to run from the form but when I edit the QueryName to be the name of the query it doesn't run and if I use the wizard to select the query from the list the delete queries do not appear. The query runs fine when executed separately - i.e. not from the form.
Is there an alternate syntax to the above to run delete queries or something that I need to change in the delete query itself so that it can be run from my form?
I have a continuous form with a button(delete). on click event I want to delete a record on another table. I though about doing this via a delete query. The sql is below:
I have a query based on two tables, joined on one field (this field is the primary key in Table A. Table B doesn't have a primary key). When working inside this query, it gives me the option to delete records. However, when I try, the row disappears from the query but then if I save and close and either re-open table A or the resulting query, that record is back. It doesn't actually delete. If I go to table A directly and delete it, it's gone for good.
How can I make it so that when I delete the record inside the query it actually deletes? And if that's not an option, can I make it so that it doesn't seem like I can delete records inside the query so that people don't make the mistake?
I have two simple tables. I want to delete the records from Table1 that are on Table2. I've created a select query that gives me what I want but when I change to a delete query, I get this message: "Unable to delete from specified tables"
I think my problem has something to do with security but I can't figure out what to change.
I am wondering if there is a quicker way to export a query to excel then have the data in that query removed from the original table. (effectively cutting the data from the table and exporting to excel)
I understand that this can be done by exporting the query to excel then running the same query as a delete query to remove the data but I just wondered if this is the most efficient way.
I have experience of VB in excel but currently only use the basic macro builder in Access though if Access VB is more efficient I can easily learn.
I am using Access 95. Lately when I make a new Form it works for a few tries then I get this error message "The Form Name you entered in either the property sheet or a macro is missed spelled or refers to a Form that does not exits. " Well I know the form exits because I just made it and I can see it. Then when I try to delete it to start over it says it’s deleting the form but still remains in the database. Any help would be greatly appreciated. Thanks.
I have a form in Access 97 which contains embedded charts.
When I try to open the from I get this message..
"282 error when you loaded the form or report. You loaded a form or report that has controls or properties that Microsoft Access does not recognise and will ignore."
If I try to open the form in design view from the main database window I get the following...
"The microsoft jet databse engine stopped the process because you and another user are attempting to change the same data at the same time." -this happens when I am the only user in the database.
and then
"A problem occurred while microsoft access was communicating with the OLE server."
When I try to delete the form Microsoft Access closes down.
i have created, from scratch, the form again which workd fine but I can't get rid of the old one.
DELETE dbo_MP_Audit.*, dbo_CAD_SINV_HEADER.SIN_CANCELLED_YNF FROM dbo_MP_Audit INNER JOIN dbo_CAD_SINV_HEADER ON (dbo_MP_Audit.Usr = dbo_CAD_SINV_HEADER.USR_CODE) AND (dbo_MP_Audit.Sin_DocNum = dbo_CAD_SINV_HEADER.SIN_NUMBER) AND (dbo_MP_Audit.company = dbo_CAD_SINV_HEADER.CMP_CODE) WHERE (((dbo_CAD_SINV_HEADER.SIN_CANCELLED_YNF)=1));
but receiving error message: "could not delete from specified tables".
I have a table that has records listed more than one time. Some of these multiple records have in the score field a zero for the score. I would like to remove all records that are in the table more than once that have a zero for the score in the score field. Any help is greatly appreciated!
i have set up a delete query to delete items ticked on a query. the form related to the query only shows the items with a "False" value in the criteria. anything set as "true" ( ticked ) is reserved for deleting. the delete query looks at the query and selects all items set to true. it works ok but i dont know how to get this work automatically without going trough the access prompts of deleting.
can this be done with code behind a button whereas if clicked, it runs the query and deletes all of the true items?
I have created a query that append all the records to another table3 that are older than two years. But at the same time delete from the original table1.
However it will be moving several records at a time any ideas?
Secondly Table1 has a 1toMany Relationship with the table2, how can i move the records from table2 to table 4 at the same time. Will the data keep its relationship?
How can I automatically bypass the messages "You are about to run a delete query that will modify data in your table."? I don't want an end user to see that message, I just want the delete query to run. Is there a way to get rid of that message without supressing all the messages in the entire database?
Dim db As DAO.Database Set db = currentdb db.execute delete master.* FROM master WHERE workitem=" " and corpid=" "
Please tell me how should i write this code( whcih should execute when a form is loaded)... i want to delete all records where workitem is blank and corpid is blank.
I'm trying to delete records from Table1 where the field "Name" is equal to the field "Name" in Table2. Please see below what I tried and is not working, any ideas?
DELETE table1.* FROM table1 INNER JOIN table2 ON table1.Name = table2.Name;
I'm trying to delete some records out of a table. I have a query that acts as a filter and is linked to two fields of the table that I want to delete from. I have put the * field from the table in the query and set the "Unique Values" property to "Yes". Access tells me "You cannot delete from the specified table".
The filter query is not an aggregate one, and if I remove it and simply have the table I want to delete from (i.e. delete all records) it will let me. I have done this loads of times before but this time it won't budge.
I have two tables. tbl_Job_Master w/ Job_No, and other fields tbl_Job_Desc w/Job_No, Status and other fields
The Select query seems to work fine
I have tried. Right Join, Left Join, Inner Join
All with no luck. If I go to datasheet view I see records returned but if I try to run it 'Could not delete from specified tables'.
DELETE tbl_Job_Master.*, tbl_Job_Desc.Status FROM tbl_Job_Master RIGHT JOIN tbl_Job_Desc ON tbl_Job_Master.Job_No = tbl_Job_Desc.Job_No WHERE (((tbl_Job_Desc.Status)=0));
I could realy use help on this. If anyone has any idea I would appreciate it.
I have now have another problem doing the same thing. I made a nested query like you said below, then I wanted to delete those records - so I changed it to a delete query. when I tried to run it, it says "Specify the table containing the records you want to delete". I tried playing with it, but I can't seem to get it right.
Basically, I have a table and a sub-table, and I want to delete all records from BOTH tables where data matches a certain criteria in the sub-table. Specifically, I have a table of patients, and a sub-table of their test results. If any of the test results are positive, I want to delete that patient and all of his/her test results.
is there any way that i can delete records from two different tables using the same delete query as i have them linked in the relationships using Member ID and if i try to delete from one of the tables then and error message appears stating that key violation has occurred. Thanks
I have two tables. The first table EES has the list of employees that I need and their information. The second table EPAY has even more employees and each employee may have duplicate rows.
I am wanting to delete any employee on EPAY that does not exist on EES.
I tried creating a delete table with the join from EPAY to EES, where a field on EES is null and then added the table fields from EPAY to be deleted. When I "view", it is showing all the rows that should be deleted, however, when I run, it is giving me the error that it "could not delete from specified tables".
Is there a way to do this? I'm not that familiar with delete queries, even though this seems to 'make sense' to me.:confused:
