I have a table that stores records by "return date". I would like to create a delete query that removes all records that fall outside of the date range entered on a specific form (frmMainMenu).
I can deleted the records that match the form criteria, however that is not what I need. The criteria used to delete the records was:
Between [Forms]![frmMainMenu]![from date] And [Forms]![frmMainMenu]![to date]
Let's say that the frmMainMenu contain the date range of 8/1/05 to 8/10/05, however the table contained data from 6/1/05-8/14/05, I would like for the query to delete all records that have a date 6/1/05-07/31/05 and 08/11/05-08/14/05.
Any assistance would be greatly appreciated. Thanks in advance for your help![/SIZE]
I want to delete certain records based on the selected date. However, I come across with this is error - Run time error '3464' (Data type mismatch in criteria expression).This part is highlighted in yellow. I even used the debug.print to test out if the sql statement is executed properly.
Code: DoCmd.RunSQL DelSummarySQL
Here is my full code
Code: Private Sub cmd_Delete_Click() Dim DelSummarySQL As String Dim StartRange As Date
I am trying to create a delete query that, for a given person, deletes records in Table B that do not have a corresponding record in Table A.
Here are the relevant tables:
tblStates holds StateID, StateName, and RegionID (RegionID is a FK to tblRegions). tblPeopleStates is a junction table between tblPeople and tblStates.
It lists states assigned to people. It has 3 fields: PersonStateID, PersonID, StateID.
tblPeopleRegions is a junction table between tblPeople and tblRegions.
It lists regions assigned to people. It has 3 fields: PersonRegionID, PersonID, RegionID.
For a given PersonID, I need to delete records (i.e., states) in tblPeopleStates whose RegionID is *not* in tblPeopleRegions.
For example, pretend that tblStates shows that State IDs 1, 5, and 6 are all in Region ID (i.e., all have a RegionID = 10).
If Joe (PersonID = 200) has StateIDs 1, 5, and 6 in tblPeopleStates, but doesn't have a record for RegionID = 10 in tblPeopleRegions, I need to delete his three records in tblPeopleStates (i.e., the ones where StateID = 1, 5, and 6).
PersonID will be found on [Forms]![frmMain]![subform1].[Form]![subform2].Form]![PersonID]
I need developing a new delete query criteria to add onto existing delete duplicate queries for deleting duplicate values. I need the new delete duplicate query to take precedent over the other two so that those values retained in the first query are kept retained after going through the second and third delete queries. Attached is a document laying out the request.
Dim dbs As DAO.Database, sql As String, rCount As Integer Set dbs = CurrentDb sql = "DELETE * dbo_InvPrice Inner Join (dbo_InvPrice Inner Join UpdatedPricing on dbo_InvPrice.StockCode = UpdatedPricing.StockCode ) ON on dbo_INvPrice.PriceCode = UpdatedPricing.PriceCode " dbs.Execute sql, dbFailOnError
I would like to create a query that will delete records that match several fields from another table. This is complicated by the fact that one of the fields will be in one of 3 columns.I have attached a test database (no real details), all Sheet2 entries need to be deleted from Sheet1.
What I need to do is delete records that have the same 'Surname' and 'DPS' value but also the same 'Line5' value from Sheet2 in 'Line3' or 'Line4' or 'Line5' in Sheet1.The 'Surname' and 'DPS' are no problem, it's the variable position of the third field. I think I could do it in three separate queries but it would definitely be better in one.
I have a form Delete which contains four fields i.e. Date, City, Depots and Vendor, which has combobox.
I am trying to delete a record from table "Sheet1" based on the combobox, for which i have written the following code, but getting an error at the lines highlighted in red :
Private Sub Command30_Click() On Error GoTo Err_delete_Click Dim stDocName As String Dim intResponse As Integer intResponse = MsgBox("Are you sure you want to delete this record?", vbYesNo + vbExclamation, "Cash Management Team") Select Case intResponse Case vbYes CurrentDb.Execute _
I want to Delete all records from the Table Named "CustomerWiseRotaryTillerRates" (Given Below) if the State in the State Filed in found in the "Customer_Master" Table (attached Herewith). What will be the correct procedure ?
I followed the steps referred in page no. 67 & 68 in the Book "Microsoft Access 2007 Data Analysis" by Mr. Michel Alexender.
Customer Name State Product_Code Product_Name Price_perunit
TSI Engineering Indutries (P) Ltd. Assam P_05 1500_Rotary_Tiller_220_RPM Rs. 63,722.00
Kishan Krishi Engineering Works Jharkhand P_05 1500_Rotary_Tiller_220_RPM Rs. 62,997.00
TSI Engineering Indutries (P) Ltd. Assam P_06 1750_Rotary_Tiller_220_RPM Rs. 66,663.00
I have a form to add, edit, and delete Records from a table. I am using the following VBA
Private Sub cmdEdit_Click() If Not (Me.frmlEmpDetailsSub.Form.Recordset.EOF And Me.frmlEmpDetailsSub.Form.Recordset.BOF) Then With Me.frmlEmpDetailsSub.Form.Recordset Me.txtAddEditname = .Fields("Name") Me.cboRoster = .Fields("Roster") Me.cboPermFctn = .Fields("PermFctn") End With End If End Sub
Instead of referring to the Subform to load the data i would like to refer to a combobox:
cboSearchName
Its not an issue but This Combobox contains 5 columns...
I have a parent form and connected to it is a subform. On the parent form I have a checkbox which enables and disables fields on the parent form and also hides the subform.
What I want to do is when the user unchecks the checkbox, this action also deletes the associated subform records, if there are any.I'm sure that this can be done with an SQL Delete query in VBA.
I am not sure if this possible, the methods I have looked up on the Internet take ages for the query to open but I'll give it a shot.
What I need to do is count (and increment) how many records are returned in a query for each person.
So if 1 person returns 4 unique records, in these records it shows 1,2,3,4 in each record.
The way i have tried is by using DLookup to check the next record and evaluate it using IIF but this takes about 25 seconds to return circa 50 records.
FTA # Date Attended Last name First name assigned person......
Each week I need to generate a report that shows the people that attended for that week, grouped by the assigned person. I only want to show the data for a specific "date attended" (i.e. that days date). I figured I first need to generate a query that only returns the data for that specific date in the "date attended" column. I did that but it is manuel by using the criteria field.
Is there an easy way to type in the date that I want the query to use as the criteria?
Below is the SQL I have on a Union Query. Each Query is based on a date range. The first Query date is Planned Immplementation Date. The second Query date is Revised Planned Implementation Date. If the Date in the Revised Planned Implementation Date is higher than the EndDateTxt Date Range I do not want the results to appear for that ECN. Any suggestions on how to accomplish this?
SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process] FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID] WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes")) ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number] UNION SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process] FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID] WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Revised Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes")) ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number];
I have a form in which I want to capture today's date when another field on that form is changed from active to Closed. In excel I would write an IF statement but can't get my head round what I would do in Access to achieve the same result. basically it's if (field name 'status')=(criteria 'closed') then populate field (date closed with 'today's date').
I don't know what it would be called or even how to start doing it in access other than it requires a criteria here is what I'm trying to make happen with access
name date yes/no criteria would be set to date > 180 days then it would equal value of No < 180 days then equal value Yes
If i set a today's date value on the database and then criteria is based of the value in the date box with the above information how would this be done.
I would like to do a search for my records based on 2 different criterias. If found, the function should just return a boolean value so that I can act further based on the boolean value.
The reason I'm doing this is that I have 2 similar tables that contains EventID and AttendeeID and these 2 tables cannot have the same EventID and AttendeeID. So before I can allow a record to be inserted in the 1st table, it must check that there is no record in the 2nd table that has the same EventID and AttendeID. If there is, then i cannot allow the record to be inserted in the 1st table.
The same thing applies when I want to insert a record in the 2nd table. It must now check the first table.
Recordset.find seems to be only catering to 1 criteria, not 2.
I'm having some difficulty obtaining the answers I want from my query. I'd have been more comfortable using filters in excel to find the answers, but my dataset is too large in this instance.
I devised a query which I thought should achieve the results, but based on a subset analysed in Excel the answers are significantly different.
My table has about thirty fields, the query I've produced is this: SELECT AH_orphans.Product, AH_orphans.Comments, AH_orphans.ESP, AH_orphans.[ESP Parts], <snip, all other fields in table> FROM AH_orphans WHERE (((AH_orphans.ESP)="n") AND ((AH_orphans.FRU)="y") AND ((AH_orphans.EntitlementName) Like "*uptime*") AND ((AH_orphans.Account) Like "nation*") AND ((AH_orphans.Type) Like "Primar*") AND ((AH_orphans.[Is a parent?])="#n/a")) OR (((AH_orphans.ESP) Is Null) AND ((AH_orphans.FRU) Is Null) AND ((AH_orphans.EntitlementName) Like "*uptime*") AND ((AH_orphans.Account) Like "nation*") AND ((AH_orphans.Type) Like "Primar*") AND ((AH_orphans.[Is a parent?])="#n/a"));
What I'm hoping for is the subset which match the following conditions: - ESP field is not "Y". Possible values Y, N, null - FRU field is not "N". Possible values Y, N, null - Only those records from EntitlementName which include the substring 'uptime' - Only those records from Account which start with the subtring nation - Only those records from Type which include the substring primar - Only those records from [Is a parent?] which equal #N/A.
Asking the same questions in Excel I get around 1.5k records. If I use the quoted query on the same dataset in Access I get precisely 11.
Thanks for reading this far! If anyone can spot the flaw/s in my query, or indeed advise that I'm going at it completely the wrong way I'd be very grateful of some advice.
i am querying a single table that contains card numbers and corresponding transaction codes (amongst other things). a single card number can have multiple transaction codes.
i want to select all card numbers that have both 0100 and 0802 transaction codes.
if i use a select query with ="0100" Or "0802"as the criteria, it returns all card numbers that have either 0100 or 0802 transaction types. if i then change the query to crosstab and group by card number, it is clear that some cards have both transaction types.
when i try to change the criteria to ="0100" And "0802" it returns nothing at all.
i'm sure the solution is something really simple - any idea what i'm doing wrong?
This seem to be simple for single criteria but i am not able to do it multiple. I want to restrict user to customer list they r able to see in form combo box drop down list.
users are in employee TBL employee group criteria is in tbl_Groups which contains value Admin,Read Only, manager etc employee r grouped through tbl_AssignUsersToGroups. customer r grouped in customerType TBL. i.e class1, class2 etc created EmployeesClassTypeRestriction TBL to store restrictions for employees
Restrictions criteria:
1-employee can view only specific class which includes all customers in that class 2- employee can view only specif customers in a class only. 3-employee can view only specif customers in a ANY class. 4- No criteria No restrictions and can view all customers in all classes( For Admin )
Tried to used Tempvar criteria in customer combo box qry but it works for above point 1 only.
Please except apologies if I sound a bit ignorant with this but I'm complete novice with Access...
Basically I have a table with the fields Name - Date - Location I need to extract info from the table based on the location field.
i.e. return Name if a specified location exists and another specified location does not. This was real pain in itself and in the end I had to run two seperate queries which returned NAmes where each of the chosen locations exist. I've then created an additional query which compares the two sub-queries and iliminates Names that appear in sub query 2.
I do hope this make's sense I'm starting to confuse myself.....
Anyway, my problem is with the date field... I have to specify a date in order to get the correct info as the results may change on a daily basis... i.e. somebody may use both locations one day, but just the one location the next. However the eventual report which I need to generate is based on criteria over the previous 7 days, although if I use this criteria in my query in completely messes up the results.
So, what I was hoping that I could do is somehow automate my query to run 7 times (once for each of the previous 7 days) and then to combine the results of the 7 queries into a single query or report...
Failing that, could anybody think of any simple way of achieving this... or will be a case of having settle for a seperate report for each day?
Any help would be hugely appreciated... once again apologies for the explaination... It porobably makes no sense at all.
I have a report that I am trying to complete based on several queries. I am trying to count the number of records based on certain criteria and using the following DCount.
=DCount("[Calculated time]","IPG1","[Calculated Time] <= 0.04" And [Ship-to party] In ("SN00207PJZ","SN09162XXX","SN09324XXX"))
I want to count the number of IPG1 records that are under .04 and have the Ship-to party of the ones listed. I have tried everything that I can think of to get it to work but can's seem to get it to. I figure it's something easy but I don't see it.
I have a table with Zip CODE field. I uploaded my information to this table form an excel file. There were over 120K rows of data so no way i could do this in excel.
So I found that some of the ZIP codes are either blank or have less than 5 digits.
Can I build a a query with the ZIP code field that will return all zip code records with less than 5 characters or blank. I'd like to repair these zip codes and a update query will be my next step.
I repeat excel is not an option because when I try to sort by the Zip Code column my computer explodes (okay not literally) ....
I am currently working on a project to develop an access database to manage a roster of calls to clients on a daily basis based on two general criteria:
1. Pre-determined days selected by the client. (e.g. Call Mon, Wed, Fri only. This can change as client requirements change.)
2. Ad-hoc changes based on the client’s circumstances. (e.g. No call from 27/7/2015 to 29/7/ 2015)
I have managed to successfully deal with the second of these with the following expression in a query:
CallToday?: IIf((Date()>=[NoCallFrom] And Date()<=[NoCallTo]),"No","Yes")
However dealing with the first is a little more difficult to work out. I have tried a multivalue lookup field with multiple days selectable, but constructing an IIF query to deal with these multiple values is proving quite a challenge.
I am thinking of using a table with days of the week and a junction table to allow the multi-selection, but I may need constructing the relationships and the query here.
I have a drawing register database which notes the revisions for all drawings issued. One drawing can be revised several times so I have a details table which notes the revision letter, date issued and the notes for each revision. Using this table I created a max date query to show the latest issue date and revision for each drawing. This query is used for a transmittal form for issuing drawings. Both the form and report is working perfectly.
The TBLTransmittal consists of the following fields ContractName IssueDate SubSup DwgNo (multi-value checkbox)
Using the TBLDwgRegisterDtls or the query QRYDtldDwgReg (which includes the drawing titles) I would like to create a query that would look up the latest revision at the date of issue and show the revision letter.
I started a query combining TBLTransmittal and TBLDwgRegisterDtls and in the criteria for DateIssued of the TBLSDwgRegisterDtls (which is when the drawing was issued by the architect to the contractor) I put "Not > [IssueDate]". This is filtering the information to show revisions issued up to the date we (the contractor) issued the drawing to our sub-contractor but I need now to pull the max revision only from this information.
Before I go I will give you an example of what I want from the end result
Drawing BK2-02 rev. D was issued by the architect to the contractor on July 17th. This drawing was in-turn issued to our sub-contractor (Sub "A") this Saturday, August 9th. The same drawing was revised this morning and rev. E was issued to Sub "A" today, August 11th.
I want the end report to show that Sub A received Rev. D on 09-08-14 and Rev. E on 11-08-14.
I'm wondering if another max date query on this new query would work? I'll try and see what happens.
