I have a field called "TimeStamp" What I would like is that if someone modifiys or make any change in the form that the "TimeStamp" will record the time and date of change.
How can this be achieved?
sandrao
i want to be able to create an On Click Event when pushing a command button that will run an Update query to update a record and after it has been updated that specific record will pop up on a Form and be displayed. i know a different way is to run the Update query and then have it displayed in a Select query but i want it to be displayed on a Form instead. is it possible?
View 4 Replies View RelatedI am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
How move to next record (without enter) after fill mask in first record in access form?
View 4 Replies View RelatedI would like to highlight record when user will click Record Selector in the continuous form. How to do it?
View 1 Replies View RelatedIs it possible to open a form to add a child record related to the highlighted record in the subform?
View 2 Replies View RelatedPROCESS AS DESIGNED: The user logs in and is given a form displaying existing records that are coded (by userid) for that user to update. From that list, the user selects a record and continues to a second form (the first form closes) which displays all the fields of the selected record which should/can be edited by the user (plus a few non-editable key fields). There is nothing tricky to how the records are selected for display. A simple query behind the first form selects data records using the userID number. The second form does a simple record select using the active record ID number on the first form. Nothing tricky -- no modules just queries, tables, forms and simple macros to string it all together.
The user can open/close these two forms as often as necessary and the record will continue to show up until a value is entered into a "completion date" field. When that field is no longer blank, the record will no longer be displayed for use.
PROBLEM: About 90% of the time, things work as expected. But 10-15% of the time, somewhere between opening the record in the second form and closing the second form, the edited record totally disappears (as if it were never opened, it isn't even system date stamped) and the input information is inserted instead into a brand new record.
Users can sometimes tell when the edit record is dropped during processing, because key fields displaying previously entered data go blank and the displayed recordID (autonumber) is changed. p>
ERROR PATTERN: NONE! It can happen as the edit record is first opening, in the middle of editing the form, or at the end when closing the form. It will happen on a specific PC 2 times in a row and the third time be fine. It has happened at multiple locations but not for all people and not consistently for the same person/same pc. The same record that failed can be re-selected and work just fine the next time.
I cannot reproduce the error myself. I have tested everything I can think of without causing the error. I can lose changes and avoid a system date stamp if I abort my Access sesssion, but that doesn't create/insert a new record with my new input. It just loses everything.
I have wondered if a momentary break in the network/communications could break the connection to the application to just enough that the form remains on the screen, but selected record is discarded. Input into the empty form would/does insert a new record.
I have asked the IT Operations group to investigate if a network/communication problem could be the culprit, but they haven't gotten far on this. I have never seen this happen before and am totally stumped but am desperate to resolve it before user confidence is damaged.
After I enter data into one field in a record I would like the form to save the record when I move to another field in the same record. It seems that the record is only saved when I exit it entirely. Is there a way to save a record when moving between fields in that record? Can this be done without using an Event Procedure for each field?
View 8 Replies View RelatedI have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.
Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.
I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.
However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.
In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.
Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?
I have a continuous form for which the recordsource is a query that retrieves dates from 10 days in the past to 10 days in the present. I want the record with today's date to be at the top of the form. The record with the oldest date is always on top. Is this a scrolling issue? How can I get the record with today's date to appear on top?
View 5 Replies View RelatedI created a search form that searches for Customer Number, Part Number, and Revision Number. The results are displayed in a List Box.
I want the user to be able to make a selection on the List Box and click an "Open Selected" button that launches that record in another form. How is this possible?
I have a table called tblFinishedGoods. There are 3 fields in the table:Serial Number, Model Number and Location.
I would like to have a form that will take input from my barcode reader and input the data for the 3 fields, if the serial number is not already in the table.(I have this already working).
But now I would like the same form to also check the table for any serial number that is scanned in...and if it is in the table already, have it bring up the model number and location for that record.
I'm thinking maybe there is something I can do with Serial Number afterupdate. Basically I'm looking for a way to not require the user to input anything via a mouse or keyboard.
If the 1 form could accept the 3 scans:Serial Number,Model Number and Location, and either 1)enter a new record if that serial number isnt in the table or 2)find that the serial number already exists and overwrite the model number and location with whatever the next 2 scans are.
Thanks
I have form call frmmasksetup which holds records of the types of masks I have and this contains serial numbers from the masks ETC...
I have another form called frmemployee that hold all my employee's detail's name,last ETC now my problem on the frmmasksetup page I have combo box to select employee but can't get it to Assign the mask to the employee and on my employee form I have subform to display which mask is assigned to which employee.
Iam very new to ACCESS. So please do forgive me for
believing that the "SAVE AS" function in ACCESS is as easy as
something similar we do in Microsoft Word.
After searching this forum and others I realise that there is no easy way
and it is considered as some thing for serious users.
(with additional coding not available in ACCESS)
Perhaps there are easier ways that I am not aware of.
I would like to open a record in a FORM which has one Combo Box
for text data, several text and Numeric fields.
I then need to change a few items and save the record as a New
Record
Only a few (mostly numeric fields) and some date entries will be changed
as well as a couple of calculated fields in the NEW RECORD.
I shall appreciate any suggestion as to how to do this.
I have a bound form which is from tblEmployee, I'd like to have a dataset below (like a splitform but not a split as they have limits) so when i search in the box it gives me say all the smiths - i select for example david smith and it displays his information in the form objects above so they can be edited?
View 1 Replies View RelatedCan I look up and verify data on a "second" form based on a selected record from first (still open) form.
I am trying to allow users to select a User Name from a combo box list and then open "Change Password" form when they select "Change Password" for that selected user name.
My problem is that I can't figure out how to associate and verify the data tied to the user name selected on the previous (Login) form ( I am trying to validate the old password tied to that selected record).
I have the first login form created, and it's working just fine. I also have the change password form created (and it's displaying the user name selected from the first form using:
Code:
Private Sub Form_Load()
With Forms![frmLogin]![cboUserName]
Me.txtPwdChgUserID = .Column(2, .ListIndex)
End With
EndSub
I also have the code written to validate and confirm old password, new password and validate new password (when the save button is clicked). I have yet to update the password with the new password (still trying to figure that out).
Attached zip file has screen shots of the two forms.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
I have a split form that's like a list of pending tasks. The data source is a linked SharePoint 2013 list where users submit requests. The user takes the information from each record and performs an action. When it is done, the user presses a button and the task status changes from "Pending" to "Processed". The form record source is based on a query that finds only records with a status of "Pending" so when the user changes the status of the task, it is removed from the list. It works fine except when there is only one task left in the work list. If the user processes the last task, the form refreshes and it goes to a new empty record and I get an error message that says I must enter a value into one of the required fields. I tried making the field non-required but it just creates an empty record in the table.
View 3 Replies View RelatedI am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....
I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".
I have a main form[frmResearchNotes] with combo box controls that filters a query populating [subfrmNotelist] containing several records from the filtered query. From there, I double click on a field within one of the remaining records, [CompanyName] for example, and it opens the new form[frmNoteDetail]. The problem is that second form is not displaying that selected record. The second form's record source has been set to the same query so when it loads, it displays the same info but it's displaying the 1st record out of the entire filtered list, not the record I clicked on in that list.
I figured I could use the strWhere function to copy the record I selected in the event procedure and then open the new form with those details. Not sure how to actually do this with VBA or if it's even the correct approach.
I have three objects a Main_Table , ClientDataForm and a MapForm all three share a common ClientID number
From that Main_Table I have created a ClientDataForm form which I enter all Data
From ClientDataForm I wish to create a button on it which runs a Macro that Saves ClientDataForm Record and then populates another form named MapForm with whatever record is currently open in Form One whether a newly created one or previous record.
How would I write this code for that button? Also why I would write it that way?
I'm not sure how to search on this, even in the advanced search. If this has been answered, could you point me in the right direction?
I have a main form AddNewCompany (the infamous tab control that now works - thanks to your combined efforts). On it I have a command button that pops up a form of continuous forms with all the companies in the table (the query calls the CompanyID and CompanyName fields only). I have attached an image of the interface.
This means the user can see if the company already exists and doesn't enter it again. (I'm sure there are more effecient ways of doing this, but this is simple and it works. I also know key fields should be autonumbers instead of text, but I have reasons for doing it this way).
What I would like to be able to do is click on the CompanyID field and have the companies information show up in the main form.
Can anyone see what I am doing wrong?
I have a main form that has a tab control on it. The main form is called frm_AddNewCompanyContacts. It is opened in edit mode. To see if a company exists I use a command button to call a popup form with a list of all companies' IDs and names. I then want the user to be able to click on a commad button on the popup form to take the main form to that record. After an intial post, and subsequent search, I found the appropriate code. This is what I am using for the onclick event of the command button on the popup form:
Private Sub cmdGoToCompany_Click()
Dim rst As Recordset
Set rst = Forms![frm_AddNewCompanyContacts].RecordsetClone
rst.FindFirst "[CompanyID]='" & Me![CompanyID] & "'"
If rst.NoMatch = False Then
Forms![frm_AddNewCompanyContacts].Bookmark = rst.Bookmark
End If
End Sub
When I click on the command button I get an error message:
"The expression On Click you entered as the even property setting produced the following error: A problem occurred while Microsoft Office Access was communication with OLE server or ActiveX Control (I don't have an ActiveX Control).
*The expression may not result in the name of a macro, the name of a user-defined function, or [Even Procedure].
*There may have ben an error evaluating the function, event or macro."
I have code for a button click event. Essentially I have a main table form that I use to enter customer data and info. I also have a button that I use to add that customer to a separate table that I use for special Customers. My code copies all the data I need copied to my other table, so I wont waste space here typing my code that actually copies the data to the new table. What I will list are the two commands I am using after that code, to close the current form (the one with the button) and open the form for entering special customer information (the form to edit data on my other table). It works flawlessly, but when it opens the other form, it opens to the first record. I want to know how to make it open to the record which I was viewing when I clicked the button to copy the data.
DoCmd.OpenForm "Special Customer Data Entry", , , Number = Me.Number
DoCmd.Close acForm, "Customer Data"
I have a database with three tables
table 1 (form1)
reference (PK) auto number
table 2 (form2)
Reference (fK)
workbook reference (PK) auto number
Table 3 (sub form within in form2)
Reference (FK)
workbook reference (fK)
data Reference (pk) auto number
Each table is a form that is linked via the keys. On form 1 i have a button that is to open the form2, which it does but every time i open the form a new record is added. Why and how do i prevent this.
Then what i want to do is add a button for a new form on table 2 form but use the same reference as the record as presently displayed. How do i add new record using the same Reference but new workbook Reference?
Thanks is advance