I have 3 tables:
tblFunctionalArea
FAID, FAName, Active(y/n)
tblSubFunctionalArea
SubFAID, SubFAname, Active(y/n)
tblLinkFAwithSubFA
FAID, SubFAID
What I need is all possible Functional Areas listed on a form where you can click on active checkbox to activate that Functional Area.
Then on the next form I need Sub-functional Areas listed, but only those that tie back to Functional Areas that have been activated.
Is this at all possible to achieve? I really don’t know how to go about doing this. Do I need a form, or may be I need a subform? I'm at a loss.
Any help would be greatly appreciated.
Thank you.
I think that my problem is best explained by an example.
In the first field the user chooses between two options for the reporter. Field 1 - Reporter: Client OR Employee
If the user selects "Client" they have to enter an address, if they select "Employee" they don't have to enter an address.
So, what I hope is to create a form where if they select the "Employee" the address fields (address, city, state, zip) "gray out" and not accept any data entry.
I have 2 combo boxes, one Categories and Products. However I have follows a tutorial and when I select the Categories, the products do not show even though the tutorial says it does. I have attached a copy of the DB.
If I have a Form that is used to populate a Table can I make one field entry dependent upon another?
For example, if I have a field for Discipline (with values such as Mechanical, Electrical, Piping) and another field for Equipment Type (with values such as Motor, Gearbox, etc) can I set up the Form so that when I select Electrical for the Discipline, only electrical items (such as Motor) are available to select for the Equipment Type field?
Using the table below as an example, if I select Electrical for the Discipline field in my Form, when I go to select a value for the Equipment Type field the drop down shows only Motor and Fan?
Discipline Equipment Type Electrical Motor Electrical Fan Mechanical Gearbox Mechanical Pump Piping DN 150 Pipe
Or, better still, can I set it up so that if I select Motor for the Equipment Type field, the Discipline field will automatically be populated with Electrical?
I created a number of graphs on forms that graph GamesSold vs RDate. If a game has no sales, there won't be any data. Is there a way I can add a label that will automatically display "Game is not yet released" and make it dependant upon the graph having data, and invisible if it does?
I am designing a form based on specific criteria from a table. I have one table "country/region" showing: Country, Region, and then primary numeric ID. I have another table called "contacts" with more info. What I am looking to do is create two combo boxes on the form, one for country and the other for region which will pull from the "country/region" table and feed into the "contacts" table". When the user writes in the specific country, the corresponding region in the combo box next to it should update automatically.
The database I'm working on stores product records. To support the user narrow down which product they want to use, the navigation form has a listbox that looks to several combox values to filter the records it displays. As the user selects values for additional comboxes, the list of products from the listbox is refined. What I would like to do is set the comboxes up so that they also have to check the listbox to determine which records they should display.
For example:
Comboxes: Customer, Species
Starting out the listbox shows all products. The user wants to find a particular product that is sold to "Harly Quinn's Crab Imporium". They select "Harly Quinn's Crab Imporium" from the customer combobox. The listbox updates to show only products sold to Harly Quinn. The database currently has this functionality. What I want to add comes next:
The user determines that there are still too many records being displayed in the listbox, so he/she attempts to refine the search further by selecting a species from the species combobox. Currently all species from the species table are selectable from the species combobx, meaning that if the user selects a species that isn't sold to Harly Quinn, that the listbox will show no records. What I would like the combobox to do is refer first to the listbox and determine which species are still viable options based on the records available from the listbox.
I there a way to determine whether or not my checkbox within a form is ticked or not dependent on another value within a field?
I have a field called 'DaysRemaining' and another check box field called 'Expired'. I want the expired checkbox to be ticked if the value within 'DaysRemaining' is '<0' and unticked if '>=0'. Is there a way i can do this within the control source of my check box?
In my table (tbl_data) I have a field named Rating. This can be anything from 1 - 10.
On my form (frm_input) I have a textbox (created using the wizard so at the moment I'll call it txt_Rating).
What I would like to know how to do is:
If the value in the textbox is 0-5 leave the background colour of the textbox white with black font. If the value in the textbox is 6-7 turn the background colour pale yellow with black font. If the value in the textbox is greater than 7.1 turn the background colour Red with white font.
I have several Suppliers, each of whom holds several SalesEvents. At each SalesEvent I might buy none, one or more Bundles. Each Bundle then contains one or more Items. These relationships are all reflected in my Access 2013 desktop db as one-many relationships with cascaded updates.
My form structure for data entry reflects the Relationships, in that I have a Supplier form with a SalesEvents subform. On that subform I can enter data about each of that Supplier's SalesEvents, and each SalesEvent row has a button to call up a SalesEvent form which has a Bundles subform. Then each row of that subform has a button which calls up a Bundle form containing an Items subform. That Bundle form identifies the Supplier, Sales Event and Bundle number, and within its Items subform I can then enter the data for each Item.
Problem : All used to work fine, but I've clearly changed something because now when I select the Items button on the Items subform in the Bundle form, the system gives me the data for the first record in the SalesEvents table, rather than the one selected. I have checked the raw data and that's as it should be. I have tried to undo all the steps I took since it last worked properly, but to no avail. Restoring the last backup (taken when I'm sure it worked properly) still has the problem.how do I find what data is actually being passed between forms and subforms ?
I have an unbound form on that form I want to put three sub forms one on a products table the other on a course start dates table and the link table that joins the other two together. all three are related to each other with Pk/FK links.
When I try to link them it says you cannot link items on an unbound form.
I have a main form with multiple subforms in tab view, right now the forms only open in edit mode, I would like all forms to open to new record mode. I know I can set the main form with the switchboard manager but what about the subforms?
I am attempting to create a database for my users to input new data via a main form. I have this main form where I use subforms as look up tables/queries to pull my stored data from. My problem is that I want to try and not have the subform on the main form; I want it to be its own window. Bear in mind I am new to using Microsoft access, and trying to learn as I go.
I have created all the forms with queries. I use the open form command to get me to my subform, which is a common findings form. From there I am able to search and filter, and once I find my desired record I want to be able to link certain fields back to the main form. (basically if possible use a command button to select this information and insert it on the main form). Typically, my users will have a generic finding to to record so I have inputted these findings so that they can select them and not have to type them themselves. Is this even possible for me to do this way, with a command button by writing a VBA code and linking criteria? The reason I am creating a separate form is so that the main form is not cluttered and is user friendly.
The fields I want to link are the same, however they are not from the same queries, and essentially the main form has its own since as of right now there is not data because it’s run of user input. The findings form has data. There are relationships established.
Thanks for any help, I feel like this might be confusing since I am unsure of exactly what I am trying to do, but any help would be greatly appreciated.
Okay. I am trying to build a form where I could get information like this but also editable. It can be either bound or unbound with enough information to update the records. I could do this several other ways but would prefer it just like it is below. Any ideas is greatly appreciated. Sam.
I have a complex form (in that it contains a lot of VB code and events) to display the information of various articles in my database. I would like to add some browsing options to the form (like a list of all articles on the left, and some different back/forward options), but I also need to preserve the form in its current state. Rather than make a new copy of the form (and have to maintain TWO near-identical copies of the same form), I attempted to make a new form, with just the browsing list, and insert the old article information form as a subform on the left. However, it seems that any of the code from the original form which refers to Forms!Article Information!Article_ID ("Article Information" is the name of the original form) are not able to load the correct information, as I am prompted to supply it myself. Needless to say, I don't want the user to be prompted for the article number each time they open the form :).
I'm wondering how I would go about opening the old form as a subform in such a way that I am not prompted each time. Or alternativley, if there's a better way to do what I'm trying to do, how should I do it?
I have search the forum and have found many solutions to this same problem but so far none have worked for me. I am fairly new to Access so maybe I am just not understanding properly.
I have a form with a main form and many subforms. All subforms but one are continuous and the other is a single form that does not allow additions.
1. I can tab from the main form to the first subform but can’t get the next subform. I have tried this on the exit of the first combo box in the subform
Private Sub EventInitialActionTaken_Exit(Cancel As Integer) If IsNull(Me.EventInitialActionTaken) Then Me.Parent.[frmeventFsubform].SetFocus End If End Sub
This works until I open a new record from one of the subforms and then I get an error.
2.Then, my last subform is the single form with no additions and I want it to tab to a command button on the main form. Right now it just goes in circles throughout the sub form
3.Also, if I ask to start a new record while my cursor is in one of the subforms, the new record will open with my cursor in that subform field. How do I get it to default to the first field in the main form? I tried Me.EventID.Setfocus on the On Load Event of the main form but this didn’t work.
I think that if I get the answer to question 3 then the code I previously used in question 1 might work.
Any help would be greatly appreciated. Thank you in advance.
The subform is based on a query. The two are linked on the 'week' value.
Now, this is what I want to do:
The user must not be able to edit data in the subform (so should I use a report instead... but then will I be able to do 2...). Selecting a row in the subform should cause the whole form to go to that record so that the user can then modify info in the fields of the main form.
I don't know VB - the only code I've used is gleened from searching these forums (a great resource, so I'm learning slowly), so I'll need a bit more than 'Do a wrzmitchigob on the bleedlethrop'!
Please Help I have a form that has pages of subforms in it. i have a number of fields in various subforms. i need the user to be able to filter the form by any or all of the fields? how should i go about doing this?? I"m a newb at this so please talk slow
I need a form with 2 subforms. the main form is for an indidual. the first subform is a list of characteristics. the second subform is sort of a calendar function, produced for date scheduled, results, next meeting date.
I have tried the form wizard, but it produces a jumble of the mixed fields. Can I create a subform or 2 before I create the main form, and then link them somehow?
I'm using access 2007 and I have a form with six subforms on it. When the form is completely load the subforms DO NOT have scrolls bars (for up and down) on the right side even though the data (rows) far exeeds the number of rows displayed. I have checked all the properties and all appear to be set up correctly. If I refresh a subform with VB on load of the main form the subforms scroll bar will show. The problem with doing this for all six subforms is the amount of time it is taking. Is there something I might have overlooked, is this a bug with Access?
I want to create a form with two subforms. I create a form with one subform without problems but i would like to know how i can link the two subforms, so when i select a row in first subform display records in second subform.
is it possible to have 3 subforms in a form?if so how would i go about this i have created the form and the 3 subforms however it only allows me to link one into the form.
:confused: Hi everybody. I have started trying to be a little more creative and making my systems a little more what the big boss where I work would like to see. I have set up an Access Data Page, with one form on it where the user would enter some required information, which is saved into a table for me to monitor (date, time, unit, spec reviewed, name etc). What I was hoping to do, was have on teh same Page, a subform or another form, where the user would reference that other form, when doing their entry. Basically, they are entering that they looked at a certain spec so if they produce the wrong item, or use the wrong materials, we can say well, you looked at this spec, or so you say.....Does anybody have any suggestions on how this can work? Or even if it is at all a possibility. Thanks!
Hi Everyone! Bear with me, I'm new to Access and I may not understand or use all the terminology correctly.
Background: I'm creating a database to track the inspections of many businesses. Each business will have many inspections throughout the year and each inspection has many items. I have a form set up which includes Business info and Inspection info (#items inspected, subtotal for inspection) on the main form, and Items in error listed on a subform (no error=no items listed).
Problem 1: I need to make a count of all items that are listed. I can do this in the subform, with no problem (in one of the footers #Discrep:count([item])) but now I need to report and use that value on the main form to calculate the percent error for the entire inspection. I don't know how to pull in onto the main form to set up my calculation. :confused:
Problem 2: This one is related and is probably the same fix. I have PriceCharged and PostedPrice for each item. I need to calculate the net error and then, using the subtotal on the main form, calculate the % dollar error.
Any suggestions, oh great and powerful gurus of the Access world? I hope I explained that clearly enough for you. Thank you very much in advance! ~Lith
I am in the process of trying to build a template in forms for my boss to quickly enter information and construct a PowerPoint presentation from this information.
Basically, I have a form that he can enter information, but it needs to look professional (not datasheet view). Is there a way that I can make a subform and frame it, so that I can copy the entire form (not just the data) and paste it onto powerpoint? I need the formatting to be consistent and appealing!
I have searched this site and tried several things over the last 3 days and am getting frustrated. All of my forms are built from existing tables. I have a main form (frmevent) with the primary key being EventID. I have many "continuous" subforms e.g. event type, initial action taken, initial outcome that the user can enter more then one record. My Event Type continuous subform has a cascading combo box. One combo box displays the Event Category and the other combo box displays the Event Types. I have the cascading combo working so that when the category is selected on those types that apply to it show up. If the user tabs to the next record and doesn't enter anything in it I want it to tab to the next sub form. I tried (please note that EventInitialActionTaken is the first field in the form) Private Sub EventInitialActionTaken_LostFocus() If IsNull(Me.EventInitialActionTaken) Then Me.Parent.[frmeventFsubform].SetFocus End If End Sub I am getting a run-time error on the form '2452' The expression you entered has an invalid reference to the Parent property. What does this mean and can anyone help. Thank you in advance.
