I am using a yes/no field to select a number of records for a report. Is it possible to deselect and turn them all back to no at one time when finished with the report. It would be nice if I did not need to deselect all of them individually.
View RepliesI have a button when you click it, it runs a append query to change all true check boxes back to false
my problem is after it runs the append query the user see a long error message, then to see the check boxes change .....you have to go back and click the button again.....not very pretty
here is what I have
Private Sub btnDeselectAll_Click()
DoCmd.OpenQuery "qupdNotificationSelectionNo"
Me.Form.Refresh
End Sub
Thanks in advance
Hi there,
I have several check boxes, that are however categorised, in my form. I was now wondering, in order to save some time, how could I make a check box that marks/unmarks all the boxes under that specific category ??
Cheers,
Pekka
i am very new to access and even vba. I have a form called FrmAgent. Here there are 5 check boxes [CheckBob] [CheckJim] [CheckNikita] [CheckNoe] [CheckKyle]. I have one button named "RecieveData". I have one table named "Agent" and a query called "QryAgent". in the same column there are five people Bob Jim Nikita Noe and kyle. What i need is to have the button when its clicked run my query to produce the data. However, if multiple boxs are checked i need the data for those people. As of right now if i click the button (doesnt matter how many boxs are checked) it gives me data for all five people. Is there a way i can do this where i can receive the data only for the people that their boxs are marked?
View 2 Replies View RelatedI have a table and in that table I have multiple columns one being check boxes and another is the description. There are others but these are the relevant ones. I filter under description for HR Payroll but this description is not uniform. After HR Payroll it could vary so the description is not always the same. I want to select all check boxes under this description and was told use a query no clue how to do that though.
View 3 Replies View RelatedI have a form that has three checkboxes (IDDocument, DrivingLicence and Certification) on it. What the form is looking to do is based on the selection it will open a scanned document of the requested documents. There are 5 permutations that could be selected (either first on only, second one only, third one only, first and second and first and third). How do I code the IF Statement this so that the system will look at the different options and then do certain things accordingly.The code I have at the moment is:
Public Sub ProcessRequest_Click()
Dim Form1 As String
Dim Form2 As String
Path = "Staff" & Me!EmployeeName & ""
If Me!IDDocument = True And Me!DrivingLicence = False And Me!Certification = False Then
Do one thing
ElseIf Me!IDDocument = False And Me!DrivingLicence = True And Me!Certification = False Then
Do a second thing
ElseIf Me!IDDocument = False And Me!DrivingLicence = False And Me!Certification = True Then
Do a thrid thing
ElseIf Me!IDDocument = True And Me!DrivingLicence = True And Me!Certification = False Then
Do a forth thing
ElseIf Me!IDDocument = True And Me!DrivingLicence = False And Me!Certification = True Then
Do a final thing
End If
End Sub
All the bits work (the form stuff) but my IF statements are not working. It seems that access is seeing the checkboxes as null and so the IF is not working when i check box 1 and leave the other two unchecked.
I have a form named Member, this form has field named hobbies, this field has multiple values selection i.e. a user could select football, cricket, listening to music and etc. these values are stored in another table and i have looked up the values in my form named member, i know access has multiple value option in combo box while we look up values from another table, but i don't want that the check boxes appear in combo box, they should be listed right in form so that i can see them without going inside the combo box and at the same time the values of these populated check boxes should be stored in a single field.
View 14 Replies View RelatedI have a table of data regarding companies (contact info, etc). The company I work for provides these companies with up to 10 different products. On my input form, I have created 10 check boxes (and thus, 10 columns of Yes/No data in the corresponding table).
Each company has at least 1 product checked off, and up to all 10.
I would like to create a combo box that lists all 10 products, and upon selecting one, a list box then populates with the names of the companies (primary key) that use that specific product.
So, for example,
Company A buys CATS and DOGS from us
Company B buys DOGS
Company C buys CATS and ELEPHANTS
Combo box options: CATS, DOGS, ELEPHANTS
If I choose DOGS, then a list box gets populated with:
Company A
Company B
and when I click either of these, the record should be brought up for the respective company.
All of this should take place in the header of the form, while the form itself can be updated based on search selections.
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies View RelatedI am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
Hi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View RelatedI'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
Hi
In my tables I have set a field to Yes/No and the format to be True/False.
When I activate the table it shows the field as a checkbox, however when I create a List Box on a form to that table it displays the fields as True/False, how can I get the list box to also display the field as a checkbox.
dave
I want to sum together the number of check boxes checked. The problem is that Sum gives a negative number. What shuold I do?
View 2 Replies View RelatedThis seems like an easy question.
I created a check box on a form. The problem is once the box is checked, it cannot be unchecked. Seems like there should be some validation running in the background that checks the state of the check box.
I have the value of the check box to equal 1.
If the field is null, then clicking on the check box assigns the value and turns on the check mark.
If the field is already 1, then clicking on the check box deletes the value and unchecks the box.
Can someone provide me with the vba code that makes the check box operate correctly? I appreciate your help.
Thanks,
Jeff
Is there a way to make sure that one of two box is checked. And if one is checked the other could not be. For example. If I have a check box called Father and one called mother. If father was checked Mother could not be checked, and visversa.
Thank You
J
If a check box is true/checked, how do I make it invisible on a report?
Any help is greatly appreciated.
Filipina
I have 4 check boxes represent 4 grade levels. When I click on a grade I have a query run for me a list of all 9th graders or 10th graders or both together.
When I run the form for the first time, all four boxes are check, when I unclick all of them and I click which ones I want the form does not work. But if I leave them click the report will work. Basically what is happening is when I unclick them, the lose their value.
I have the check box set up with a Default Value as "09" or "10" base on what Grade Level there is.
So my two questions are, how do I keep the value of the check boxes after I unclick and click again and Secondly, is there a way to have the boxes unchecked when I run the program?
I have a column which are check boxes to indicate whether plants are available for sale or not. The problem is how do i put code or symbol in to check all boxes or to uncheck all boxes.
View 4 Replies View RelatedI have a table that contains the following fields:
township
male - yes/no
female - yes/no
number of kids
I need to create a query that will give me the count of males and females and sum of number of kids - all grouped by township.
I have created 3 separate queries that calculate each part and they work. My question is how do I display the results of all these queries in one report, all grouped by townships?
Or if there's a way to create one query that will add all of this up? when I tried to create one query, the check boxes were not calculated properly, because Access did not distinguish between filled and empty checkboxes and would just count them all...
Any ideas or suggestions would be really appreciated.
I was just wondering if there is any way that I can create a query to find all of the records which have a tick box checked.
There is a tick box on each form and I want to know what I type in the 'Criteria' box is Query Design so that I can quickly and easily search for all those which are checked.
I know that in a normal query, to search for a particular object you can type it in (e.g. 'Mugs' - will find all the records under the name of 'Mugs' when typed under the right heading) but i'm unsure of what to type in under the 'Target' heading to make it find all those which are checked.
Any ideas. . .
I have a form I am creating from a query that has numerous yes/no checkboxes. I have been able to enter over 2/3rds of the yes/no boxes. However, I'm trying to enter the last of these into the form, and they suddenly change to text boxes. When I go back and check the query, they have also changed to text boxes there as well. I've checked and re-entered the data from the table to the query and finally to the form again. Same thing happens everytime. Any idea what's going on here?
Thank you ~
hi guys
i have 2 questions
1.
how can i count selected or not selected checkbox fields (yes/No) in a tex box ?!
( for example we have a 2 yes/no fields that are Male and another Female , and i want to make a form that shows number of males and number of females that selected in a text box )
2.
how can i make a search form that when i chose check boxes and then Search button it will show me the list of selected checkbox that selected in main form
( for example if we have 3 checkboxes 1.(low) 2.(mid) 3.(high) in main database and form , and if i want to make a search form that shows me list of enterees that is (Mid) )
thanks alot
Good Day Everyone :)
I appologize that this may be a very remedial question, and that many previous threads pertained to the general topic of check boxes, but as I am new to the world of access, I did not find any threads which i could apply to my following question.
I would greatly appreciate any help and guidance :)
What I am trying to accomplish is to set up a subform in which each record is linked to a check box. The check box would be used to select unique records for an upcomming search.
My problem: the check box which i have added to the subform (from the toolbox) is linked to all of the records. That is to say that when I check one box it checks all of the all boxes as well. :eek:
Is there any SQL language which i should be applying here?
Suggestions are much appreciated :)
Thanks a million in advance,
~ N' Take care ~ :)