Design Master Reverts To A Replica After Synchronization???
May 15, 2006
Hello I have a perplexing problem …
I have been using replication successfully for years. Recently the PC where my Design Master resided crashed taking the hard drive with it. No problems I thought, I used a replica to recover the design master and placed it on the new hard drive (the OS and Access was upgraded from 2000 to XP, however the Access 2000 file format was retained – there are still a couple of laptops with only W2000 software). I understand that moving the path of replicas or design masters is no no, so I proceeded to start from scratch and create a complete new batch of replicas based from the new design master.
Everything was going to plan UNTIL a replica was routinely synchronized with the design master. The design master reverted back to a replica. I recovered the design master again, everything looking fine until again a synchronization causes the design master revert to replica.
Next plan of attack to hopefully fix a potential corruption problem: create a new blank database, import all (non-system) tables, compact and repair, and create a new replica from scratch. From the design master, I created the complementing replicas and sure enough the Design Master again reverted to a Replica after a routine synchronization.
I repeated this “start from scratch” procedure, and the same results prevailed. I am at a loss especially since I verified that the hidden system MSysReplicas table had only two entries after the Design Master and Replica were first created.
I would greatly appreciate any ideas of where to go next with this problem.
Thanking you for your time.
View Replies
ADVERTISEMENT
Apr 30, 2007
Hello. i'm working with 10 replicas and a design master, but when i tried to add new tables and forms i get the message (Error 3492) " The synchronization failed because a design change could not be applied to one of the replicas" and after that, i cant synchronize anymore!!!
i don't understand what could be the problem.
thanks if anyone can help.
View 2 Replies
View Related
Apr 14, 2007
I recently was asked to update a client's BE & FE database.
It seems the client only has a replicated version of the database. I don't have the original Design Master.
Problems with negative autonumbers (it seems are due to replication), made me want to remove all need for replication from the database sets.
I attempted to modify some of the Tables in the BE and keep receiving the same error when I try to save it:
ERROR: "You cannot make changes to the design of the database at this replica"
I haven't found a solution on the forum yet. Any ideas?
I found the Replication part of this Microsoft KB article somewhat helpful: http://support.microsoft.com/kb/275561/en-us
View 6 Replies
View Related
Jun 7, 2013
I have recently created a database meant for managing inventory. I have started writing queries and building forms, and a lot of it is running smoothly, but I am having a few snags.
To give a brief background, I am currently designing a form in which a user will fill out when an incoming part comes into our company. The form NEEDS to ask the user for at least the PartNumber and the PONumber, but the way I have my relationships set up, I am not exactly sure how to design the forms (not the physical layout, but where the data goes). So when I have an incoming part, will I use the PartPOID to figure out which part number and PO number it is? I am not exactly sure how to make a form for the user that is not confusing.
Attached is a picture of my relationships and my database.
New Compressed (zipped) Folder.zip
View 14 Replies
View Related
Nov 27, 2006
I have a problem retrieving my Design Master. I regularly backup my DB onto a separate hard drive. And in doing so have lost my designing capabilities. I have tried replicating and retrieving the DM per the help section, but I receive numerous error messages telling me Error accessing file, network connection lost rollback error, etc. Any ideas would be greatly appreciated.
FT
View 1 Replies
View Related
Aug 2, 2005
I appologise but I am useless with Access but am trying to learn.
I have a datababse that we use to log calls onto, There are five members of our team and each member has thier own replica of the datababse. At the end of each day we have to re-sync our replicas to the design master.
It would be nice if we could put a button on the form we use to do the synchronization for us. Is this possible and how do you do it? bearing in mind that I am not too good with access so I need laymans terms.
TIA all
View 2 Replies
View Related
Jan 3, 2006
Hey, Happy New Year to all.
I have a replicated access database, and I want to move the design master to another computer. I have tried using the Windows 'Copy and paste' command, and the 'Save as' command, both result in creating a replicated database.
I have also tried chnging the design master status to a replicated database, but then I am unable to view any VB code behind the controls when I go to design view.
Can you help?!!!
Cheers, Adam.
View 2 Replies
View Related
Dec 19, 2007
I am trying to replicate a database for mobile working. When I attempt to 'create a replica' I get this error:
"MS Access can't convert to design master
Cannot make the Table "[TableNameHere]" object in tables container replicable."
The table in question is fairly large and has 248 columns and is linked to 3 other tables of similar size as well as 3 smaller ones. Got about 2000 or so records and set to cascade deleted and updated records. 248 columns should leave enough spare columns for replication though, shouldn't it?
Any suggestions as to what I should look for to fix this?
View 7 Replies
View Related
Mar 27, 2008
I have an application that when in design master shuts down when I attempt to open a certain form. I have traced the problem to a linked field from another table, by creating a new form and ommitting the said field, problem is its a required field!
If I copy the database (Backup) and run it as a replica it does not happen, if I then convert the replica to design master it happens.
Any suggestions please??
Steve
View 1 Replies
View Related
Jan 25, 2008
I am using Access 2003. I have developed a split (front and back ends), replicable database. As I make changes to the design master, I want to either keep old copies of the design master or ideally, maintain the design master under source code control (e.g.:CVS). This would allow me to be able to retrieve older versions of the database. The problem occurs what I make a copy of the design master, or when I try to pull out of my source code control system (CVS) an older version of the design master. When I open any of these copies, Access thinks this database is a replica and will not let me make any changes to the design.
Is there a way around this problem?
Or am I trying to do something in Access that does not make sense?
Thank you for the help.
David
View 2 Replies
View Related
Oct 14, 2013
How to structure some MS Access 2007 Forms for the following scenario.
My table structure is as follows:
Product
++++++
ID (pk)
ProductName
...
Tag
++++
ID (pk)
TagName
ProductTag
+++++++++
ProductID (fk)
TagID (fk)
I want to have a main form that allows me to search for and displays a list of all products (and the dozen or so attributes for each product) that meet that criteria (I'm thinking a continuous form view of products).
So far so good. No problems.
Now I want a "tagging" form to the right of my continuous forms product list that is linked to the product which currently has focus. The tag panel should always show a complete list of all Tags. I want a checkbox next to each tag that I can switch on and off whether that tag applies to the currently selected Product. I also want to be able to add tags on the fly (without leaving the main form).
I think I have three forms in play :
Main Form
Product Form (subform to Main) my product search criteria is probably on this form header.
Tag Form (also subform to Main)
But with this approach I'm have trouble linking the two sub forms to each other. Actually, I'm having huge trouble figuring out how to display the list of all tags with a check box that when checked on and off creates / deletes a record in the ProductTag table and I really want Access to do as much of the CRUD as possible. I would prefer to avoid writing screeds of SQL INSERTS/DELETES on events. Am I asking too much of Access?
View 1 Replies
View Related
Jan 14, 2006
Hi All,
With the help of many people on this forum, my database is coming along well (Thank you!). My DB will end up on a server where it will be accessed. My question is; should I use the replica function, or back up the file every day or so.
The database I am replacing has been a replica and it always looses data. I am not sure it is because its a replica or not.
Any thoughts?
Bones
View 8 Replies
View Related
Jul 21, 2005
I am still new to Access and am loving the learning process. I am stuck on a problem though. I have serached the forums here and various other places and haven't found the info I am looking for. I was wondering if there is a way to have a relpica (or a seperate database that can syncronize) that has a modied design. I want the main one to have everything on it, reports/forms/ add/delete/ect, but I want another one that is simply a data entry form, with only the option to input data. I would love to do this and avoid system security measures with usernames and passwords. From my reading it doesn't seem like I can do this, but I still hold in my heart a glimmer of hope. Please help, and if you can explain the process to me, all the better (its how I'm learning).
View 1 Replies
View Related
Feb 4, 2008
Hi
Am using a replica set in order to distribute a school reporting system around teaching staff.
Everything works fine apart from one thing. A marking system (basically 1 to 6 list) is stored in a linked table. Before replication this appears in the correct order. Once the database has been replicated however the list is placed in a random order and I cannot rectify this.
With only 6 items this is not much of a problem but I also want to use a much longer list and the same problem appears.
Can anyone explain why this happens and if there is a simple way to get around it?
Am really only an Access novice and I really appreciate any help that you could give me.
Cheers
Mike
View 9 Replies
View Related
Jan 25, 2008
Is there any way in access 2003 or 07 to track when a database was last synchronized with any one of it's replicas?
It would be useful to know and be able to store this in a table.
View 4 Replies
View Related
Nov 13, 2004
Hi
I'm totally stuck creating a form because I don't know how to set up my combo boxes. The database is about tiles and the forms for data entry to create an invoice with one combo box to hold the tile range eg: White, blue, etc. I want the second combo box to hold the details on the tile names of the range chosen in the first combo box. eg: if 'white' is selcted in the tile range combo box, then only the names of the white tiles should appear to be selected from in the 'tile name' combo box.I then have a separate field to display the price of the tile depending on the range chosen.
This is for some exam coursework and the guidelines specify that I'm not allowed to use VB or other code. Could someone please tell me how exactly I can sort this out so that the three are linked (2 combo boxes and the price field)?(queries?adjusting form properties?) All the details on tiles are stored in one table. Any guidance is greatly appreciated.Thank you so much.
-Camryn
View 2 Replies
View Related
Apr 21, 2006
I know how to setup a Replica's Priority, but where do I go if I want to change it afterwards? I have searched everywhere, or am I just supposed to create another replica and set it then?
View 2 Replies
View Related
Mar 14, 2008
I need the same database as managed and unmanaged in repl manager, I think.
My replica set got scrwd up and now I need to re add an unmanaged replica.
Previously the map displayed a scheduled synchronization line to the replica not managed by synchronizer.
I can add the unmanaged replica, but how do I add the synchronization line?
Do I need the same replica added to the map 2x? 1 managed and the other unmanaged?
i tried uploading 2 bmp files to show the way it was and is now but i dont see them, how do u add bmps to post?
View 1 Replies
View Related
Aug 16, 2005
We are running Access 2002 on Win2k. The database has been split into front and back ends, and synchronization occurs directly over LAN with 7 replicas. During synchronization I received a failure message "The search key was not found in any record. (Error 3709)."
I have tried several things found on Microsoft KB and other forums-- Compact and repair, removing indexes from memo fields, updated Jet and Microsoft Data Access Components-- but nothing has worked. Does anyone have any ideas on this one?
Thanks,
James
View 1 Replies
View Related
May 23, 2007
I have an Access 2002 database (about 120mb) which was replicated using Replication Manager (version unknown). It is set up to use Internet Synchronization. We use it on state government LAN and WAN as well as the Internet. It works well in most cases, but on a few computers we get the error "Http address not found" when synchronization is attempted. The address is indeed visible to those computers. We have determined that reloading Windows (XP Pro) will usually solve the problem at least for a while but when GIS mapping software is installed it reappears. More worrisome is that some brand new laptops with factory-installed Windows are showing the same problem, which means it could get worse as we upgrade equipment.
Has anyone else encountered this error?
View 5 Replies
View Related
May 22, 2012
MS Outlook contacts to MS Access database table to get in,MS Outlook contacts to an Access database?
View 12 Replies
View Related
Aug 4, 2005
Love this forum! It orginally helped me build a database to manage customers back in 2002 (using Access 2002). Becuase of our slow server, I was forced to spilt the database and it's been great for years (some glitches). Recently one of the users upgraded to Access 2003. When he sync's to the master file, the master has problems. "...contains a missing or broken reference to the file 'OWC10.DLL' version 1.1" I reviewed the references and it's looking for Microsoft Outlook 11, instead of 10. When other users sync, everyone now inherits this problem. Do you have any ideas for a solution so I don't have to fix reference problems? All users will eventually be on Access 2003 so having him stop using it would only be a temporary solution. Is there a patch or upgrade to fix this problem? Any help? thanks in advance....
View 1 Replies
View Related
Nov 28, 2005
I currently have a database thats A Replica which I need to Convert Back to a Normal Data file, Is there a simple way of doing this other than creating a new db with tables then using Querys to add the data from the replica.
I'm using 2002 and the replica if sized around 470Mb with over 200 Tables.
also does anybody know if the file size for assess 2002 was incresed from access 2000's 2Gb.
thanks
mick
View 2 Replies
View Related
May 2, 2008
I am getting this error on a access 97 database that we have been using for years. the message just started popping. use are still able to access the database, yet this message will not got away.
this member of the replica set has expired because it hasn't been syncronized with another m ember of the replica set.
View 3 Replies
View Related
Aug 21, 2013
Using access 2003 my replica set tables in both the master and replicas seems to have lost the key field! The data and field itself are simply missing from every table. When I look at the data in the tables the key field called 'UID' is not visible but I can still see it in the relationships view and in certain forms and queries. If I try to re join any of the two tables the UID field comes up as an option to join the two with but it's still not visible in any of the tables.
View 1 Replies
View Related
Nov 7, 2007
Trying to sync between a back end database and one of the replicas we use. Getting the error "The search key was not found in any record" Error 3709 while peroforming ISAM Seek.
Does anyone know how to find the offending record that is causing the problem? It's not related to an indexed memo field either. The only field that is indexed is the AutoNumber Primary Key field.
The only other option I see is to bring up both tables, manually input the differences, and create a new replica.
Thanks!
View 1 Replies
View Related
