Table 1 contains telephone numbers and rates per minute
Table 2 also contains telephone numbers and rates per minute
I am trying to check the rates in one table against the other.
The problem I have is that the telephone numbers in each table are of differing lengths.
For example ......
Table 1 contains telephone number 01234 567890
Table 2 contains a rate for numbers starting 01234 5
I have split the numbers in Table 1 in to 0, 01, 0123, 01234, 012345, 0123456, 01234567, 012345678, 0123456789 and 01234567890 but I am stck on how I can now use this to match to data in Table 2.
In 'words' I would like the database to 'say' ...
0 in Table 1 - Is there a match in Table 2, if so what is the rate? If not then look for .....
01 in Table 1 - Is there a match in Table 2, if so what is the rate? If not then look for .....
012 in Table 1 - Is there a match in Table 2, if so what is the rate? If not then look for .....
0123 in Table 1 - Is there a match in Table 2, if so what is the rate? If not then look for .....
01234 in Table 1 - Is there a match in Table 2, if so what is the rate? If not then look for .....
012345 in Table 1 - Is there a match in Table 2, if so what is the rate? If not then look for .....
etc etc etc ....
The numbers in Table 2 are varying in length.
Can anyone provide guidance on database design and / or help with writing queries ?
Working on a database that tracks codes, descriptions etc.
One of the items they would like is a 'change' report.
On this report, they would like it too list 2 things. They would like it to list if any entries that refer to a expired edit type (determined by the end date field). Then if the code was updated to a new edit type it would display this too.
So the report would look something like this.
If the code that refers to a expired edit type, and has no update it would say code# removed <then list the edit type that expired>
or
If a new entry for that code was created with a new edit type, it would say something like
Code# Changed from <old edit type> to <new edit type>
Is this possible? I'm not even sure how to visualize it, so hard time moving forward with it.
I need to be pointed in the right direction if you don't mind. I understand underlying database structures pretty well, but I am not sure how to create a form in Access so the user can enter new data. I am tring to create a form based off of the classes table first and then go from there. I was hoping to be able to allow the end user the ability to enter all information from one form.
I have attached the relationship structure that I have setup but I am not sure where I need to go next. Should I create queries and then insert the queries to my form?
A simple personal database created by me is to be deployed on a home network having two PCs. I did splitting to FE and BE. The BE shows only tables. I would like to have the guidance of experts in this forum for the following: 1. Whether BE to be copied first in the host PC? 2. FE to be copied in the other PC? 3. After copying the Access DB how to link FE and BE between the two PCs? 4. Whether data entry, edit, search etc. possible from both the PCs? 5. If I test with dummy records, how do I delete dummy records, from BE or FE? Shall be grateful for help.
Good Morning, I am new to Access and I welcome expert guidance on the relationships of my database. The database will be used to track employee training and although I've enjoyed limited success so far I'm hoping that eventually I'll get it right.
The database has to do just a few things so it doesn't have to be very complicated. It basically has to store employee, training event, and completed training event information. The attachment shows the tables and their relationships.
The are basically two types of training that the database needs to store. The first is training that applies to everyone and the other is training that only applies to certain job specialties. These types of training are identified by the ProjectMandatoryCode and the JobCode respectively.
The ProjectMandatoryCode is a default value that is automatically entered everytime a new employee is entered into the database (EmployeeInfo table) and it is also a default value when a training event is entered into the (TrainingEventInfo table) that applies to everyone. The employee JobCode is a selection when a new employee is entered into the EmployeeInfo table.
When the user wants to enter a training event that is job specific, they are able to select a JobCode from a combo box/option group and this code is written to the record. Selecting one button from the option group writes a default value (ProjectMandatoryCode) to the TrainingEventInfo table while selecting the other button enables the combo box so that a specific JobCode can be entered against the event.
Everything works fine except... so far I've been unable to produce a report that lists every training event that pertains to the employee whether it be ProjectMandatoryCode or JobCode related. I can query and produce completed events or a list of what events are required but nothing that is complete. Ideally, I should be able to produce a complete training plan for the employee which shows all necessary events and where the employee has completed the task I should be able to show the DateCompleted.
This failure has led me to doubt my table relationships since all my efforts at various query joins have failed. Is there anyone who could enlighten me so that I could learn from this, complete this task, and apply this new knowledge to future databases? To the person with the answer, thank you in advance for your assistance. Respectfully, Dale Gagnon
Hey everyone, I'm new to access, I have been using Excel for quite a while and I am familiar with VB and macros.
I have never been much of a book learner, mostly hands on, which means a lot of reverse engineering to figure out why/how things work.
I have a scenario, and found a DB that had some functionality that I liked and I had reverse engineered it to do a lot of what I want.
Where I need some guidance:
1. on my opening form (Clients) I would like to be able to type in Client Number and have it return the correct info.
2. in my Who Has It is there a way to do data validation (or dropdown box) I mean I only want them to be able to enter valid names not crazy stuff like MickeyMouse.
First off sorry for jumping in and asking questions on my first post. I have been searching the net templates and answers and while it has got me so far I still cant find specifics I'm stuck on and would appreciate any help.
I have an access design project to do for uni. To give you some background I've done some VBA programming in excel and have a good grasp of office and windows but haven't really used access before.
I have got Ms Access Inside out (bit over my head) and Ms Access Step by Step and have been working through their tutorials which have helped my understanding of access but dont arnt really specific enough to my project (or maybe i'm missing something)
The Brief is as follows:
"You have been instructed to design and develop and information system to capture students module choices for the business school. The system will run on MS Access and be supported by programs written in visual basic. Spec is as follows:
The system should be designed so that students can automatically select their options for semester 1 and 2 from a screen which will indicate to them whether they have broken any of the following constraints: -> choose 30 credits in both first and second semester -> business 2 cannot be selected unless Business 1 is -> Programming 2 cannot be selected unless programming 1 is -> Decision making and Data analysis share topics so students cant do both -> Bus Finance and Corp Finance share topics so students cant do both
There is a table with 7 module options for each semester and their credit weight, either 10 or 20. The outline is deliberately vague, 20% of marks will be for supplementary features that will enhance the systems functionality and usability.
------------------ Based on the examples I have worked through, I see it like a basic ordering system:
I need a database that will let me input customer information (that I can do)
Then allow me to Create an order for the customer Using a form that lists the products available from the products table
When Creating the order, with the form, rules need to be enforced to ensure the order is valid (ie certain products are not chosen together, the products value adds up to 30 for semester 1 and 2).
Once the order is complete a report is generated to show the products ordered (modules chosen)
Is this the right way to look at the database design?
I see the module choice form as having all the modules listed and tick boxes, however the only order forms I have managed to find have drop downs, any pointers here?
Am I right in thinking it would be VBA that will allow me to set and enforce the rules on module selection? If so any pointers on how?
Is there a way to get VBA to validate the inputs on the order form in real time, eg grey out one selection if another is selected, not allow more module to be ticked than 30 credits. I guess the code can be looped to do this? or is it easier to check the inputs after ok is pressed then give a warning box if its incorrect.
Again apologies for coming in on my first post and asking a torrent of probably basic questions, but I have tried my books and the net and would appreciate any guidance
I'm kinda lost in here so I'd appreciate some help in pointing me in the right direction please. I've no doubt the answers are out there but I'm having trouble finding what I need, probably because I don't know how to frame my questions!
Basically the story is this - there are three guys covering various aspects of the business, they each visit three separate locations - all guys visit all locations. We have made a "big plan" that has 14 key deliverables in the locations as a "region" .
For each Key Deliverable there will be Actions, some Actions will be done in all locations, some might only be needed in one location. Each owner will describe the Action and link it to the Key Deliverable it supports.
What we want to do are things like Take Location 1 and Guy A and show all the things he is doing to support Key Deliverable X.
or
Show all the Actions in Location 2 that are being done to deliver Key Deliverable Y by all Guys.
That sort of thing - progress reporting and identifying where we have nothing happening to support a Key Deliverable or too many actions in one Location etc
We have all our plans in Excel spreadsheets at the moment, each guy fills in a sheet and at present the idea is that we copy and paste it into the mother of all spreadsheets to present to the Gods - it's not happened yet because it's clumsy and well, it's my job to present it and I thought "there's gotta be a better way!" I can import the sheets into Access but then it all gets a little tricky and I run out of tallent.
OK so if you've read this far you're wondering if I have any idea what I'm talking about when it comes to Access! Well I am pretty much self taught and rusty but I can see that Access could help us get organised and
My limitations - I'm using standard Access 2007, I doubt corportate IT security would allow me to add in any useful plug ins or upgrades etc.
Am I using the right tools? I'm limited to MS Office really so I mean should I stick to Excel or carry on pursuing an Access solution?
I've got this problem and im 95% sure its going to need a query in order to achieve this answer im looking for.
I'm creating a Software Licensing Management db and its all working lovely. However my only problem remains is the graphical representation (text box within one of the forms) of howmany licenses are/aren't(doesnt matter if this number is a +/- number) available.
In order to achieve this answer I dont think you'l need the table structure of any of my tables other than these two:
However I would like to add a column to either of these tables named 'Availability' or something similar which will show the licenses available.
I've tried a number of Update/Append queries but all have failed. I want this Available running variable held within the table due to it not changing to much of the current db design as i baisically finished the project and they asked for it! any ideas of how to efficiently achieve this will be much appreciated!
I am currently in the midst of conversation over at utteraccess.com about a large database project I am working on.
I will post the most recent updates here, but if you want to download the database for your own review, you'll have to go over to the other forum. By the way, this is NOT an advertisement. I am a real person with a real, significant, and immediate need of as much assistance as possible for this project.
Before I go on, a few things about me. Though I am in the legal profession, my technological background is very strong, including a high level of proficiency with MS Office apps with the exception of Access. I know my way around the program (the result of its homogeneity with the rest of Office), but have not made a real database in the past. I also do not know any programming languages.
I have recently indulged in an Access crash course of sorts, including some book and online study on things like planning, design, and normalization, but I am still having difficulty wrapping my head around making it work.
That said, the link to the other discussion is: [W W W DOT]utteraccess.[ADD DOT COM]/forums/showflat.php?Cat=&Number=1590364&page=0&view=collapsed&sb=5&o=&fpart=all&vc=1
Feel free to gloss over it to see how things have progressed. Below is a paste of my most recent substantive post. Any help anyone can give me is of great value to me and I really, really appreciate it. _____________________
Hi Everyone,
Attached is the most updated version of my database project for your review. I have also attached a sample of the output we would like to have for each product. This sample is not based on actual data, but it clearly shows what we are trying to achieve via a form of some sort. More on this in a minute.
The following changes have been made to the DB:
-Changed tblTrustProspectusVersion to include the appropriate data, based on our business model. -Added descriptions to all non-PK fields. -Created relationships to illustrate how things fit together. Note that these are NOT the actual relationships, but are for illustrative purposes to help everyone here (including myself) further understand how things fit together.
Our Business:
I am part of my company's legal department. Our team handles a number of different things primarily associated with Securities and Exchange Commission (SEC). filings. We have two major product lines. Everything that happens with one in this DB happens with the other as well.
Each product within a product line has certain features and other necessary information we need to see when doing our filings (see the attached sample output). These features and necessities include, but are not limited to, various statuses, various numbers associated with the SEC, various important dates, etc.
In addition, each product has a certain "fund lineup" associated with it. These funds are made up of two components: the name of the fund (aka "portfolio") and the name of the subadvisor to that fund.
Futher, each of these funds is associated with a certain Trust. The SEC requires us to send prospectuses to clients based on these Trusts, which, as I mentioned, are comprised of the said funds.
Basically, we need to be able to select a product from a drop-down list and have all of the aforementioned information populate instantly.
Before I close, one question with respect to my "tblProductFeatures". Like I mentioned, each product has a certain set of features associated with it. Each feature has a certain fee associated with it. These features come in four basic categories: Living Benefits + fees, Death Benefits + fees; Maintenance fees (just short list of the possible fees); and 12b-1 fees (another short list of fees).
Since the features can be so easily broken down, should I add them to their own tables?
Please consider this as you give your advice on how to acheive my desired goal.
I hope this makes sense.
And again, thank you all so very much for your help thus far.
I'm looking for a keyboard shortcut to expand the columns in "design view" of a query.
What I mean by this is rather than selecting all of the columns and double clicking to see the entire text, I'd like to be able to a shortcut.
The entire process as I see it involves 3 steps so I will need thesolution to the 3rd step.
(1) [ctrl+spacebar] to select initial column (2) [shift+arrows] to select all of the columns I need (3) [keyboard shortcut] will expand all of the columns "field" names to the size of the column heading
Alternatively, if you know of a shortcut that will expand the columns without having to select them first I'll take it!!
I now understand that when opening and saving crosstab queries Access (2010) runs that query to ascertain the column names. Unless you hard-code them. Running the query takes at least 20 minutes. I have hard-coded where I can, but one report takes arbitrary dates so I can't hard-code them.
I believe that turning off AutoCorrect might make a difference to whether the query runs - but I don't want to turn it off.
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
I have a sub form in DataSheet view and I would like to lock the design so that the User should not change the layout
Even when I set the property of the Datasheet “Allow Design Changes: Design View Only” users are able to unhide the hidden columns and they can also change the size of the column by dragging the column end line
Does any one know how to lock the design of datasheet ( I am using this sub form datasheet for data entry but do not want users to change the layout)
From this table, I can determine which employees have taken which courses. But how do I determine which employees have not taken a particular course (prompt for course code).
**Note: There is no table that contains a list of courses, since there will be over 2000. The courses are simply entered for an employee as they are taken.
Hello,I am attempting to create a database for a charity organisation, the database will hold information about there volunteers, roles, languages, building, and shifts.One of the main problems I have at the moment is how would I cater for the shifts. Open Sunday - Monday 6 Shifts at present different days are open for different shiftsAny help pointers greatly appriciated.
Design Query : by two criteria I have a table by tow field : 1- name : for insert name of book 2- date : for insert date And I have a Query by two criteria 1- name 2- date (Between [Enter Start Date and [Enter End Date]) In my query I have tried the following formatting 1-Criteria: Like "*" & [forms]![bank].[Text0] & "*" 2-Criteria: Between [Forms]![bank]![Text2] And [Forms]![bank]![Text8] Open Form “Bank” and try : 1- report by name (means report only of name Field) 2- report by date (means report only date between date Field) 3- report by name and date (means all complete fields in “bank” Form) But ; I'm not sure how to do that for two criteria in queries Please enter criteria in query
I have written a query to calculate how many hours we have worked for our clients. This has a number of sub-queries which sum to make different columns in the main query ie: Hours invoiced so far, Hours to be invoiced, Hours remaining from their allocation, etc. I am refreshing the queries due to a design change and now have a question..
Which is the better design:
To have those sub-queries with selection criteria from a join to the same table in each (to filter out records at a lower level) OR To have that same selection criteria and join just once in the main query? (which of course means its processing many more records but the join to the selection criteria is specified once)
Hi All, I am currently in the process of writing a manual for one of our access database systems (it's written in a modified version of access). Unfortunately this database was not written by me and has many different queries which in the end returns a number of export files... Obviously I could look through each query one by one and copy the details down into a table in word or whatever.
I am just wandering is there any way to export the design of the query itself or even print it out, as obviously I could then complete a Visio like diagram and include that in the appendix of the manual.
Searched google and the access help and what not but I can't seem to come up with anything :(
i'd like some initial help with how best to set-up my tables for a database i need to create. if anyone could give me a synopsis of what i need to do it would be great and then i can try and piece it together.
here are the requirements;
one student can attend many different courses.
each course runs for 10 weeks.
i'd like to be able to have forms to;
- add a student. - assign classes to a student. - record absence via a combo box for each student for each week
i'd also like to have a report mechanism that can record if a student is absent for 3 or more classes.
as i said, some pointers or examples would be great as i am new to this. i pressume i need;
a table for students studentid firstname lastname
a table for the courses courseid coursename
a table for attendance attendanceid courseid studentid present/absent (combobox) week
Am most stuck on the date part. the data may not be entered every week so i can't really use a date function. instead i need a combobox or something to be able to select the week.
I will try to explain this as best as possible, please let me know if there's any more info i can provide in order to get a better response. I am making a database that links the following tables:
Product Fund Company
The value for each of these combinations will be a simple yes/no, but the problem with the relationship design comes in because of the companies. For each company there are multiple smaller companies, for instance B company is comprised of a1, a2 and a3 entities. The information I am puting into the database is specific to the a1, a2 and a3 entities, not B company as a whole. What i need to query is B company as a whole. For instance, i need to know that B company can sell widgets(product) through 1, 2, 3 and 4 (funds).
I can't think of a way to consolidate the data from the smaller companies into the data for the company as a whole, especially since the smaller companies may sell the same products in the same funds. My current Table relationships looks like this: http://img338.imageshack.us/img338/5282/tableif8.jpg but i don't know how to manage the company as a whole(eg. B Company above)
The second problem i have is once i have the data for the company as a whole i need to be able to query multiple funds. I thought this was going to be easy at first by switching "or"s to "and"s but, even after playing with parenthesis any "and"s that i add just make it so it is looking for "1 AND 2 AND 3 AND 4" in one field. what im trying to make it do is query (Product = z, Fund = 1, available? = yes) AND (product = z, fund = 2, available? = yes) etc.. and have it output a list of Companies (eg. B Company)
I realize that I can query like this by querying a crosstab with funds as columns, but the problem with that is funds will change because I have 5 groups of people using the database who want different sets of funds (and it will output entities, not companies).The database needs to be dynamic so when one group of people changes their preference of funds or we add a new fund I dont have to make a brand new query/form/report.
Any comments/quidance is appreciated, please let me know if you need any more information. Thanks! :)
I am using Access 2003 with Windows XP Pro. I have a problem with using a query and the dreaded UK Postcodes!
I have a Client table that contains a field “Client Postcode 1”, in which is entered the first part of the UK postcode i.e. AB11, WC1A, E1, EC2V, etc.
In a Candidate table here are many text fields where we enter which postcode a Candidate wants to work in, i.e. TN, CV4, EC, W, etc.
We have a separate Candidate Search form where we select a particular client (Combo box from the Client table) which then displays the Client’s Postcode 1 data i.e. the first part of the UK postcode before the space.
We have a select query that then tries to match the Client Postcode 1 with the postcode that the Candidate wants to work in from the Candidate’s table.
In this query design grid I have successfully created criteria that will match the Client Postcode 1 field to the Candidate’s postcode field – very straightforward. This, for example, will match a Client with a TN39 postcode with a Candidate who wants to work in the TN39 postcode.
In the same query design grid I have also been able to successfully match the Client Postcode 1 field to a Candidate’s Postcode field using just the first 2 letters (using Left). This matches a Candidate who wants to work anywhere in the TN postcode area (TN1, TN2 etc.) with a Client whose postcode starts with TN
However, what is stumping me is where a Client’s Post code has only 1 letter followed by numbers (E1, B2 etc) in the first part of their postcode without returning EX, BL etc. I would like the accumulated wisdom on this forum to point me in the right direction to design criteria to input into the query design grid that will match ONLY the first letter of the postcode IF the second character is a number.
My problem is that I would to write a query to display the number of days taken for each of the 12 months of the year.
In the example of Employee 4 their sickness spans two different months, I can't get my head around how to produce the correct result which should look like:-
I'm going to make up names and values -- I'm interested in the structure.
Table ALPHA:
COLA DAT1 DAT2 DAT3 1 5 7 9 2 4 14 8
Table BETA:
COLA_IND DAT1 DAT2 DATN 1 a b c
Table CHARLIE:
COLA_IND DAT1 DAT2 2 d e
Table DELTA:
COLA_IND DAT1 DAT2 2 f g
Ok, the idea here is that the data in table ALPHA contains data with COLA a key such that selecting 2 would yield the data row "4, 14, 8."
Now, COLA_IND is a "COLA" key for table ALPHA (sorry, I can never remember which side is called the foreign key). So, from tables BETA, CHARLIE and DELTA, I can access any row in ALPHA based on the key "COLA_IND"
Here's the fun part. When I build my query, it wants to use an inner join on the keys from all these tables... In order words:
SELECT blah blah blah INNER JOIN blah ON (ALPHA.COLA=BETA.COLA_IND) AND (ALPHA.COLA=CHARLIE.COLA_IND) AND (ALPHA.COLA=DELTA.COLA_IND)
What I'm looking to do is expand BETA, CHARLIE and DELTA with the information from ALPHA based on the key COLA_IND. I don't think this is doing what I want.
I have a query where I want to see a percentage of executed demos. I currently have Name of the promo (group by), # of demos (group by), Status (criteria = E for executed demos, count) and Percentage: Status/# of demos. Everytime I run this query I get this message: "Data type mismatch in criteria expression." The only data in Status is either a O for open or an E for executed. The E in Status is the only criteria I have in the whole query. If I take the count function off Status, it runs, but does not give the right results. Does anyone know what I am doing wrong?
