Determine If InputBox Cancel Button Clicked?

May 21, 2014

How can I determine if the InputBox Cancel button was clicked?

View Replies


ADVERTISEMENT

Forms :: TBO Value According To Button Clicked

Jun 22, 2014

I have a form, with just two buttons, say "Tyre" and "Engine". These buttons open the same form, say frmCar.

What I want to do is when I click the "Tyre" button, a tbo in the frmCar to get as value "Tyre" and when I click the "Engine" button, the same tbo in the frmCar to get the value "Engine".

View 10 Replies View Related

Modules & VBA :: Recognize Which Button Was Clicked

Dec 1, 2014

I'm designing a form which will display a lot of employee information in a tabular layout. Users need the option to update a lot of these controls, but I want them to do that on a separate form. I'm wondering if VBA can determine the position of a clicked button within the tabular layout.

So if I have a layout like this:

| label | textbox | button | label | textbox | button |
| label | textbox | button | label | textbox | button |
| label | textbox | button | label | textbox | button |

Can I have some code which determines that, for example, the second button across on the 3rd row is clicked and read the corresponding label?

I was planning to have each button just call a function passing an argument, but since all these buttons will be labelled "update" it could get a bit confusing if I need to re-arrange the controls. So I wondered if what I describe above is possible, and which VBA functions I would need to look into if so?

View 7 Replies View Related

Forms :: Set Focus To Text Box Once Button Is Clicked

May 28, 2014

What do I need to put into a macro attached to a command button to set the focus to a text box once the button is clicked?

View 1 Replies View Related

Modules & VBA :: Auto Populate Of Field After Button Is Clicked

Oct 17, 2013

i've got a data entry form. when i click the button add all the other buttons go grey, i am in mode "New" also i am able to add, edit, records in this state, when i press save i want the supplierID field to automatically populate itself with the next SupplierID record THAT IS EMPTY. So say that my last record was ID number 45 then when i click add on my form and go into "New" state the SupplierID field automatically populates itself with "46" btw this is all an unbound form,

View 7 Replies View Related

Forms :: Getting Subform To Open To A New Record When Button Is Clicked

Mar 3, 2015

I have a subform [ctrlLogDetail] on a parent form [incidentdetails] that is opened by the user when they click on a button on a navigation form. These forms are used for a variety of purposes. The problem I'm having is that the user needs to be able to select an incident number and go to the appropriate form (I accomplish this by using this code: DoCmd.OpenForm "IncidentDetails", acNormal, , "Activity_ID = " & Me.cboINum in the on click event of the button.) This works appropriately. The subform is also appropriately linked to the parent form.

I need an additional line of code to have the subform go to a new record when the form opens to an existing incident number. Since I use this form/subform when doing different tasks, having the Docmd.RunCommand acCmdRecordsGoToNew in the Form on open event isn't optimal.

I only want the LogDetail subform to open to a new record when the user wants to add an entry, but not when they need to edit a specific entry. What is the appropriate syntax to use either in the openargs event of the openform command or elsewhere in the procedure so that the gotonew function on the subform only occurs when this button is clicked? I'm having difficulty getting access to understand that I want the subform to open to a new record but not the parent form.

View 1 Replies View Related

Macro - Adding Timestamp When Button On Form Clicked

Jun 25, 2013

Is there a macro that I can create so when a button on a form is clicked it would add a timestamp (or least the current day's date) to a date field?

View 3 Replies View Related

Modules & VBA :: Toggle Fields To Get Visible Based On Button Clicked

Oct 31, 2014

I'm quite new to Acces (2010) . Currently, I'm working on a form in which certain fields are set to invisible. I'd like to toggle fields to visible based on the button clicked.

Example:
Field 1: O No O Yes --> When No is clicked Field 2 (containing a date) becomes visible
--> When Yes is clicked Field 3 and 4 (both yes/no fields) become visible

View 5 Replies View Related

Comparing Date Field And Trigger Action When Button Clicked?

Jan 9, 2015

I have a table to store "issues" with fields Issue name(text), target date(date) and status (combo box-active & pending statuses). default status for new issue is active. when clicking a button i want to change the status of every record to "pending" status (combo box value should be pending) if the target date<current date.

View 2 Replies View Related

Modules & VBA :: Cancel Button On Form

Oct 8, 2013

what would i write in the onclick private sub of my 'btnCancel'.i need it to do a number of things depending on whether there is data entered in the form fields or whether its completely empty, is there is data being entered in some fields and the cancel button is clicked it should ask whether the user wants to lose all current data as a msgbox, or if there is completely no data in any of the fields and the cancel button is clicked it shoud take me make to the main form where the rest of my buttons work, which is "inmode normal"

View 3 Replies View Related

Forms :: Cancel When Hitting Form X Button

May 9, 2013

Here's the setup:

- I have a parent form bound to a parent table with a subform bound to a subtable.

- The parent does not allow data entry and has its sole field filled by a listbox.

- The subForm is a data entry form which contains two buttons in addition to it's fields: btnCancel and btnOK

-btnOK checks to ensure that all required fields are filled out and then saves and closes the parent form. - ALL OK

- btnCancel closes undoes any changes andcloses the form - ALL OK

The issue I have is with the user utilizing the Parent form x button to close the form. For uniformity I would like to not remove this button but would like it to prompt the user whether to discard the changes if the form is dirty.

I attempted the following on both the parent and sub forms to no avail. I can't even get the event to trigger:

Code:
Private Sub Form_BeforeUpdate(Cancel As Integer)
Dim rspSaveorDiscard As VbMsgBoxResult
rspSaveorDiscard = vbYes

If Me.Dirty Then
intSaveorDiscard = MsgBox("Are you sure you want to close without saving?", vbYesNo, "Discard Changes")

[Code] .....

I was under the impression that when closing a form using the x button the before_update event was triggered first, then the close event, then the unload event. How should I handle this?

View 1 Replies View Related

Modules & VBA :: Button To Cancel Entry On A Form

Jul 17, 2013

I'm looking for a button that cancels an entry on a form. I want everything within that form to be cancelled including the Primary Key field. I currently have a button the uses the me.Undo code and then automatically closes, however this only clears the data that has been entered by the user. So when the user re-opens the form the primary key field is showing a 2 instead of a 1.

View 3 Replies View Related

Cancel Button On Add New Record Form Not Working

Feb 5, 2014

I have a cancel button on an add new record form and its not working for some reason. When I press cancel it prompts if I really want to cancel and when I press yes it cancels the record creation BUT it adds a number to the recordID autonumber as if one has been created. Is there anyway to stop this? Here is my code

Option Compare Database
Private Sub Cancel_Click()
On Error GoTo Err_Cancel_Click
If Me.Dirty = True Then

[Code] .....

View 14 Replies View Related

Modules & VBA :: Cancel OnExit Event When Another Command Button Is Pressed

May 8, 2015

I have a form with a control for the user to enter some data and then two command buttons 'OK' and 'Cancel'

For the OnExit event in the control I have a procedure that check the user input and if incorrect, opens a message box with an error message asking the user to correct the data. It then cancels the event so the focus remains in the current control.

However if the user presses the 'Cancel' command button on the form to cancel & close the form, the OnExit event for the current control still fires and asks the user to correct the data.

In my code in the control, how can I recognise that the Cancel command button has been pressed, so I can cancel the OnExit event and close the form?

View 2 Replies View Related

Forms :: Cancel On Load Event When Pressing Command Button

Aug 21, 2013

I have a form (Pipeline) with an on load event that automatically directs the user to a new empty record.

Code:

Private Sub Form_Load()
DoCmd.GoToRecord , , acNewRec
End Sub

Now my problem is that I am trying to design a 'search form' that will allow the user to look up a specific record in the main form by pressing a command button. Creating the search form is easy enough. I cannot figure out how to override the on load event in the main form when pressing the command button.

As it is right now, the button opens the form and then go directly to a new record.

View 5 Replies View Related

Cancel Record In Subform If Click Cancel On Parent Form Before Save

May 24, 2014

I have a form and a subform in it. I added New cancel button in the form so that the the user can cancel the record creation and no record will be inserted in the parent table.

But when details are entered in the subform (a datasheet) row records will be created in the subform table. what is the correct method or how to cancel these records if the user choose to click cancel button on the parent form.

View 5 Replies View Related

Masking Inputbox

Feb 25, 2007

Would anyone know if it is possible to mask and input box with a password mask (*****)

my code is simple:

StrPswd = InputBox("Enter Password", "ENTER PASSWORD")

I was trying to mask the entry in ****** when the user enters the password.

Any ideas ??

Thanks

View 2 Replies View Related

How To Put InputBox Value In Field

Mar 28, 2005

Hey All!

Well I got a little problem and well... is simply but just I didnt know How.

When I pop op a inputbox and then i enter value I want this value got parse under a field

The code is the follow:

Private Sub SetPSW_Click()
Dim Boite As String
Dim PSWNew As String

PSWNew = PSW.Value
' The current password is sotre under this field PSW
Boite = InputBox("Entrez le nouveau mot de passe", "Nouveau Mot De Passe")
PSWNew = Boite
' Here I want then the value of Boite is putting on PSWNew
End Sub

Thx for help cuz i can't figure out how to do with a inputbox

View 2 Replies View Related

InputBox TExt Box

Sep 22, 2005

Is there any way to change the password character that MSAccess uses (*) to
something different?

I want to use the lower case (L) from Wingdings (because it would look just
like the Windows XP password

Any Advice would be appreciated.

I like to apply this to a text box

MSAccess 2003 (2000 Database)
Windows XP

Thanks

View 1 Replies View Related

Set Size Of Inputbox

Apr 13, 2006

Hi all,
I have an Input box that appears on certain criteria, using the folllowing code
Code:inputbox: myqty = inputbox("Please Enter Quantity!")If Nz(myqty, "") = "" ThenMsgBox "You must insert a value" GoTo inputboxElse![Issued] = myqty End If

Does anyone know how i can set the size of the Inputbox as at present it appears to big for what i want.

Thanks in advance
1E1V

View 1 Replies View Related

How Do You Save Inputbox Value To Table?!

Aug 10, 2006

Okay, I've been working on this database for weeks now, I'm almost done, there is a light at the end of the tunnel and my boss is anxious to implement the db as I'm only here for 3 more weeks and it MUST be completed, tested, error checked before I leave. So I'm running out of time FAST!

Okay, the problem is simple. I'm using a Data Access Page in Access to build a nice little front-end for my database for my co-workers to use. On this DAP (Data access page) I have an Input box that allows the users to browse their directory and select a file. I need to take the path/file name that pops up in the input box and just save it to the table. I can take care of all the other elements.

So, through DAP, how do I save the value in the inputbox into my table. Please, any help would be great! :eek:

View 2 Replies View Related

How To Mask Input In A InputBox

Jul 12, 2006

I have an input box in which the user types in a password to enable the shift bypass, when the user types in the password it show it letter for letter, is there a way to mask the input so that it shows the characters as the traditional *

[CODE]strMsg = "Do you want to enable the Bypass Key?" & vbCrLf & vbLf & _
"Please key the programmer's password to enable the Bypass Key."
strInput = InputBox(Prompt:=strMsg, title:="Disable Bypass Key Password")CODE]

View 5 Replies View Related

Modules & VBA :: InputBox Search With (Like)

Oct 2, 2014

I am using an input box to find a Street name in a record using the following:

Dim rs As Object
Dim strCriteria As String
DoCmd.OpenForm "frmStreets"
strCriteria = InputBox("Please enter Street Name")
DoCmd.OpenForm "frmStreets"

[Code] .....

I know that if the search criteria is a number, then the .findfirst will work OK, as I am also using that, but I am not seeing where the " or ' or * should go so the correc

View 5 Replies View Related

Running Two Queries From One Inputbox Result!?

Feb 25, 2005

Hi,

I have created the following function in my datebase so that i could specify the date a query works from.

Option Compare Database

Function GetParmValue() As Date

GetParmValue = InputBox("Please enter the date you wish to update!?")

End Function

I have a button on a form that runs the query in question, there is also an identical query that needs to be ran using the same result from the input box but rather than it display the input box twice i wondered if there was a way i could use the result from one of the boxes with both queries!?

Here is the code for the button;

Private Sub bImport5_Click()

DoCmd.SetWarnings False
DoCmd.OpenQuery "Update"
DoCmd.OpenQuery "UpdateFuture"
DoCmd.OpenQuery "MoveFuture"
DoCmd.SetWarnings True
MsgBox "Files have now been updated to the specified date and moved to the Future Dated table!", vbOKOnly, "Update Complete"

End Sub

Any ideas guys?

Many thanks
Tim

View 2 Replies View Related

Modules & VBA :: Use InputBox To Open Form

Jul 24, 2014

I want a user to enter a number into an input box and then based on the number in this box a form will be opened with records associated only with that employee number. (All employee numbers are stored as text)The code below opens the form, but it is blank.

Private Sub cmdOpenAddKeys_Click()
Dim EmployeeNumber As String
EmployeeNumber = InputBox("Please Enter Employee Number:")
DoCmd.OpenForm "frmAddKeys", acNormal, , "[Forms]![frmAddKeys]![empno]=" & EmployeeNumber
End Sub

View 3 Replies View Related

General :: Moving Record From One Table To Another Using Inputbox

Jun 20, 2014

I am trying to get a record from tbl_new_accounts to tbl_closed_accounts, based on the number entered in a input box.

Code:
Dim StoreNumber As String
StoreNumber = InputBox("Please Enter The Store Number", "")
CurrentDb.Execute ("INSERT INTO Tbl_Closed_Accounts SELECT Tbl_New_Accounts.* From Tbl_New_Accounts WHERE (((Tbl_New_Accounts.Fld_Store_Number)=" & StoreNumber & "));")

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved