Determine Which Page Has Focus.

Feb 2, 2006

Hi,
I have a form with 8 pages (tabs) on it. Each page has a Quit button which populates both a Form name variable and a Question name variable. When a user clicks the quit button the code forces the page name associated with the quit button. I would like to try and catch the same information if someone clicks the DB Close button(s) at the top of the screen. How can I programatically determine what page was/is open when the close db button was clicked? I guess I could create a switch that is populated when a page has focus and then call the last switch value. But I think that seems like extra programming, if I can just call the current page name/index. Is there something like the form name?
E.G.:

MyForm = Me.Form.Name

maybe an active page index or something? The problem is I won't know what page is opened at the time a close button is clicked unless I use a switch of some sort.

Thanks.

View Replies


ADVERTISEMENT

Forms :: Set Focus To A Specific Page On Tab Control In Access

Apr 24, 2014

If there a way to set focus to a specific page from a command button on a Tab Control?

I tried Me.TabCtl0.Value = 3.

But it doesn't work.

View 7 Replies View Related

Reports :: Breaking To New Page If Subreport Cannot Fully Print On Current Page

Nov 12, 2013

I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.

View 3 Replies View Related

Section Header At Bottom Of Page And Detail Lines On Next Page

Nov 22, 2004

I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).

But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?

This is what I currently see

Alaska
Ancorage
Prudo Bay

California
Whittier
Anaheim

Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs

Deleware
Dover

-------------------------------------------------------------------------------------------

Thanks !

View 1 Replies View Related

Reports :: Page Header - Don't Display If No Detail Records - On Last Page

Jun 13, 2015

If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?

I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.

View 1 Replies View Related

Data Access Page Filter Refresh The Page

Dec 30, 2007

Hi All,

I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.

MSODSC.DataPages(0).Recordset.Filter="AppID = 3";

My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.

How can I stop the page refresh itself?

Thanks and Happy New Year!!

View 1 Replies View Related

Forms :: One Page Form Printing Blank Second Page

Oct 21, 2013

I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.

View 2 Replies View Related

Reports :: One Page Report Showing Second Blank Page

Apr 20, 2014

I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?

View 3 Replies View Related

Reports :: Footer To Bottom Of Page Or Page Footer To Last Page Only

Oct 23, 2014

I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.

1. Print page footer with Report header = NO - only works if your report is two pages or more.

2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub

The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.

View 1 Replies View Related

How To Continue A Form Page After Page Automatically

Jul 9, 2005

to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.

So right now my form looks like below


CAD#
Person name
Charge

Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"

Officer name date page # of #


Thanks in advance.

Matt

View 1 Replies View Related

Calendar On Page 1 Also Displaying On Page 4 Of Form

Sep 3, 2006

Hi All

I have added the Allen Browne Calendar 2k control to my form.

My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.

What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.

Any suggestions please?

Many thanks
Tee :(

View 6 Replies View Related

Reports :: Page Footer To Print On The 1st Page Only

May 17, 2013

I've used the following code on the footer on print procedure:

Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub

This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.

View 3 Replies View Related

Reports :: Generate A Blank Page After Every Page

May 23, 2013

I have made a report on my query. The page setup is all around merging 0.2" and page size A4

When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.

I have included my report.

View 2 Replies View Related

Going From Page To Page In A Tabbed Form

Oct 25, 2005

I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas

View 3 Replies View Related

Reports :: Dates To Go Across The Page And Not Down The Page

Mar 11, 2014

I am trying to create a report that has the dates go accross the page and not down the page .

Example:

Need:
Jan 2014 Feb 2014 March 2014

Ans so on. I will also need datat under each date.

I am having issues with the reports to give me the output that I need.

View 1 Replies View Related

Determine State

Mar 28, 2006

I am trying to determine the state that a job is located in. If the ProjectID begins with a 2 then it is in California. If it does not then the job is located in Nevada.

State: IIf(Left([tblMainFrontierUnits].[ProjectID],1)="2","CA","NV")

What is wrong with this statement? I am getting a compile error.

View 5 Replies View Related

Determine Where Query Used

Oct 7, 2007

How do I determine which forms, reports or other queries use a specific query in my entire database?
Thanks in advance.

View 9 Replies View Related

Page Numbering Multiple Reports With References To Page Numbers In Other Reports

Sep 24, 2004

I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.

1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.

2. How can you add a page reference in one report to something in another report?

Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?

View 2 Replies View Related

How To Determine Who Is Logged On My Database?

Oct 30, 2006

Hi,
I have a sub, which shows in the Intermediate window who is currently logged to the database. This is my code:

Sub ShowUserRosterMultipleUsers()
Dim cn As New ADODB.Connection
Dim rs As New ADODB.Recordset
Dim i, j As Long

Set cn = CurrentProject.Connection

' The user roster is exposed as a provider-specific schema rowset
' in the Jet 4.0 OLE DB provider. You have to use a GUID to
' reference the schema, as provider-specific schemas are not
' listed in ADO's type library for schema rowsets

Set rs = cn.OpenSchema(adSchemaProviderSpecific, _
, "{947bb102-5d43-11d1-bdbf-00c04fb92675}")

'Output the list of all users in the current database.

Debug.Print rs.Fields(0).Name, "", rs.Fields(1).Name, _
"", rs.Fields(2).Name, rs.Fields(3).Name

While Not rs.EOF
Debug.Print rs.Fields(0), rs.Fields(1), _
rs.Fields(2), rs.Fields(3)
rs.MoveNext
Wend

End Sub

Now I want to provide this information in a table or other kind of output, when the administrative user presses a button on a form.

What do I have to do with that code? :confused:

Can Anybody help me with that? :)

Thanks in advance...

View 14 Replies View Related

How To Determine What Objects Use A Query

Jan 14, 2008

I would like to know how to do the following:

Query 'X' is a sum query.
How do I determine which other queries use Query 'X'

I want to make some changes to Query 'X' but I want to be sure of which other queries will be affected.

Thanks

View 1 Replies View Related

How To Determine The Label Caption

Aug 25, 2006

On a form I have multiple labels. In the Click event of all these labels I would like to call a generic function for futher processing. For this processing however, I need the caption of the label the user clicked on. How do I determine this caption?

View 2 Replies View Related

How Do I Determine When A Recordset Was Last Updated ?

Dec 5, 2004

Hi Guys

This is an access question, but I am using ASP to manipulate access data.

Q: How do I determine when a recordset was last updated ? Ie a table within a database ?

MTIA

Darrin

View 1 Replies View Related

Determine The Next Latest Date

Jan 17, 2005

I am hoping someone may be able to help me with this one. I have a set of dates that I would like to query for the next latest date based on certain criteria. Not sure if I explain clearly, if more info is required, please advise. Thanks so much in advance for your help.

View 4 Replies View Related

How To Determine Table Sizes (in Mb)

Dec 4, 2012

I have a multiuser database back end with approximately 25 tables. The file size for the back end has recently jumped from approx. 50mb to 270mb, but I do not know where the data causing this increase is placed. Is it possible to measure the file space usage (in mb) that each table contributes so that I can determine the source of the increase.

View 1 Replies View Related

How To Determine Whether Or Not A Listbox Has Items Selected...?

Oct 6, 2006

Hello.

As my title states, that is my problem! I'm building search criteria from a form and have multiple list boxes... I want to be able to determine whether or not a list box has items selected or not. I have tried as many things as i knew how to with no luck...

Also, i searched the forum but could not find what i was looking for -_-

Thanks for any and all aide!

View 2 Replies View Related

Use Code To Determine If A Record Is On A Query Or Not

Jun 6, 2007

I have a form that shows employee license information. I also have a query & form based on that query to show licenses currently suspended. I would like to on my employees form to flash "license suspended" label if their name/record id is on the license suspension query. For all employees whose license isn't suspensed I would don't want anything to show. I can get the label to flash and to appear. I just need help evaluating the query and comparing it to the current record. Example I

if me.id = queryname.id then....execute label flashing, etc.

Can I write code to do this? Thank you

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved