Using MS Access 2013, part of Office 365, I am trying to construct a report that has a different first page footer than the rest of the document. Googling for answers has produced a few options, but none that seem to work. I have virtually no VBA knowledge. I was hoping that there might be some code that I could place in a label in the footer and have it work.
View RepliesI am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
I'm using a web control to display a page. I want to have a code that can copy to a field in that same form, the html source of that page that is displayed in the web control. How I can do that?
View 13 Replies View RelatedI've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
Jabez
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then
Me.PageFooter2.Visible = False
Else
Me.PageFooter2.Visible = True
End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
2nd Page: No footer with only 16 rows of data.
I am struggling with building and If Then statement in my Report Footer. I have a report that pulls data from two tables...Students and Homeroom. This gives me a list of the students in each homeroom class and they are separated by homeroom. I would like to use a function in the page footer that counts the number of students who are members of our PTSA organization and then returns a percentage based on the total number of students in each homeroom class.
In the Report, I have on each page:
Page Header: Homeroom, LastName, FirstName, FamilyID
Details: LastName, FirstName, FamilyID
What I need is for the function to look at the FamilyID field and determine is there is any value entered. Then I need a count the total number of records in that homeroom and the total number of records with a value, so I can then get a percent of how many students actually belong to the PTSA in each homeroom.
Is there away to have the report footer only to display on the first page?
View 4 Replies View RelatedI was able to create only 3 pages in access report. I am not able to go beyond 3 pages since the page footer is not moving down, means I am not able to drag it down.
It is a simple report of resume with only text boxes. My report comes around 10 pages.
How do I stop the report footer from printing on a separate page. I have seen several suggestions but nothing seems to work.
View 1 Replies View RelatedI am trying to create a report that has a header ( all ok ) then could have 1 or 15 detail lines ( all ok ) which contain cost for each line
then I have a footer with the subtotals of the costs and also bank details
then I have footnotes
What I need the report to do is keep the subtotals, bank details and the footer notes at the bottom of the page all the time weather I have one detail line or 15 detail lines
What is happening at this time is the footer information is moving up or down depending on the number of lines I have.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have some reports which lay my data out perfectly.For example,Report headerPage headerDetailsPage footerReport footerNow, I'd like to have exactly the same layout on some forms but with various buttons, etc. for manipulating data.The only problem is that when I put something on the form footer, it appears at the bottom of the viewable screen area no matter whether the detail area should overrun or not ?Is this due to form size or something else?Ideally I'd like to have it appear right at the bottom of the form and allow the user to scroll down the form to see the footer.
View 6 Replies View RelatedI am trying to Hide or Show the Access Window by using two buttons on a Form. Running Access 2013 in Windows 7 64bit.
I have used code from the Internet as below but added the PtrSafe item to the Function Declaration as below:-
Option Compare Database
'Hide Access desktop screen and float Forms on pc desktop
Private Declare PtrSafe Function IsWindowVisible Lib "user32" (ByVal hwnd As Long) As Long
Dim dwReturn As Long
Const SW_HIDE = 0
[Code] ....
I then have two buttons on a form coded as below:-
Option Compare Database
Private Sub cmd_Hide_dbw_Click()
Call fSetAccessWindow("Minimize", False, False)
DoCmd.OpenForm "frm_Test", acNormal
End Sub
[Code] .....
I have attached a Test Database which demonstrates the problem I am experiencing.
Do the following sequence...............
Open the Test Database. DO NOT ENABLE CONTENT
The Access 'Ribbon'Test_Database.accdb is active and usable
Open frm_Test in Design View in order to inspect, all should be as shown above.
Now click the Enable Content warning
Switch frm_Test to Form View
Click button Hide dbw. Closes the Access Window
Click button Show dbw. Opens the Access Window...HOWEVER....
Attachment 20252The Access Ribbon is locked and usable !!!
I cannot find a way to re-activate the Ribbon
I have created a database that is hosted on our company sharepoint. The database contains subcontracts with resource information by geographic location and status. I have built queries and added them as reports to the web app but I need to figure out a way to sum totals on the queries. For example, one report lists all resources of a particular type by 4 different zones and 3 different status. I need to have the bottom row show the total resources.
View 6 Replies View RelatedI have problem sharing an Access 2013 file from one cumputer and then change the data in the file on another computer, or i can change it but the change wont be made one both computers.
I'm working so i need my secretary to be able to change information or add, but i also need to get the change.
I have an Access 2013 database file with many fields. One of them, I'll call it Field 3, is a box which I would like to either leave blank or put a check mark in it. I would like to be able to create an Iif field for Field 3 where a check mark is automatically inserted in Field 3 IF Field 1 - Field 2 <or= 0, otherwise I'd like Field 3 to remain empty.
View 9 Replies View RelatedAccess 2013 ... Is it possible to compact a database to a new name?
(In previous incarnations of Access I regularly 'compacted and repaired' databases to USB sticks rather than simply copy the file in the (mistaken??) belief that this was a more reliable approach)...
I can't see where to do this in Access 2013!
I want to do multiple regression in Access 2013. with the VB code?
View 3 Replies View Relatedwe are moving from Access 2003 to 2013 using Windows 8.1 64bits. We used Leban's code and library to create and merge pdfs. C
Creating pdfs can be done with built-in functionality in Access 2013. But I can't find a way of merging pdfs. I've tried Leban's Dlls files but I am getting run-time error: "File not found:StrStorage.dll" do I need to do something extra to make Leban's code work on Windows 8 64bits ?
I made a new column in a table in access. The table is not linked and linking unfortunately is not an option. In the new column, I want to create a sum for 5 years of funding. There are multiple columns for a different fiscal year.
In excel, it is simply =sum(range), but I am drawing completely blank how to fill in the column with the sum data.
The end result is the data from 4 tables will be displayed in Forms and Reports.
Essentially what I need is an ability to bulk update a column in access table without a need to reupload the entire datasheet (over 100k rows with about 30 columns).
I'm currently working on a project which requires integration of sms feature in ms access 2013.
The sms provider which i use for sending sms is smsglobal.
I am setting up a database using Access 2013, and am trying to test downloading files from Excel. For some reason it is not allowing me to have more then 4 columns in the excel file, it gives the error "Subscript out of range". I thought it was the type of variable at first, but when I tried deleting different columns on both files, the transfer always worked with 4 columns. How do I allow more columns to be transferred?Also, is there a way to not include the row numbers of the excel file as an ID column and only include the ID given in the first column?
View 4 Replies View RelatedSo I have finished a database and split it which is great. Only issue now is how do I turn the front end into an executable so no access to any parts of the access program or system can happen? I have done this before in a very old version of access but how to do it in Access 2013.
View 2 Replies View RelatedI need to copy all text from all textbox to one text box.
View 14 Replies View RelatedI have a table in access and I need to format it so that when column "Status" = "Closed" column "Closed" = "yes". so it will automatically mark column "Closed" "yes" if "status" says "closed". Instead of having to change both columns all the time.I know how to do that in MS Excel, but is it possible in MS Access 2013?
View 3 Replies View Related