Here is my problem. I have a table with a lot of columns. I want the user to be able to select which column he wants to display in a query/report, how do I do that? Is there some kind of way to do a command
SELECT [table].[like [user input]]
either in SQL or Query Design, so that a form would pop up and ask user for input, and then display column whose name corresponds to that input.
I am building a form in access and I am trying to find a way where user input isn't possible in the associated textbox when "No" from on option box is selected.
View 3 Replies View RelatedI have created a from which consists of search boxes in the above and the table in the below.If we search for any in those search boxes then the results will be displayed at the bottom (The results will be displayed in the table which is located at the bottom of the page).I had done with the above part.
My Requirement : If I click on any of the row in the results table then is it possible to display only the selected row in a new form? If I search for a keyword MS in a search box and if it returns 40 results and if I click on any one of the result then the selected result should be opened in a new form.
Hi
I am posting this question again, as I think there was some miscommunication from my side. I sinccerely apologise.
Actually there are three fields on a form.
1. Combo Box : Label is Name
2. Text Box : Label is Code
3. Text Box : Label is Department.
These three fields are stored in the table.
I wants that when the form gets loaded, then in the combo box field all the names from the table should appear. When I select the particular name from the list and the focus is lost from the combo box then the two values from the table should show the corresponding text boxs.
Thanks in Advance
Hi
I am posting this question again, as I think there was some miscommunication from my side. I sinccerely apologise.
Actually there are three fields on a form.
1. Combo Box : Label is Name
2. Text Box : Label is Code
3. Text Box : Label is Department.
These three fields are stored in the table.
I wants that when the form gets loaded, then in the combo box field all the names from the table should appear. When I select the particular name from the list and the focus is lost from the combo box then the two values from the table should show the corresponding text boxs.
Thanks in Advance
How you could display a few selected fields in different rows within the same table.
SO as an example
Machine_No Board_No Board_Mode Board_Data
1 1 xxx xxxx
1 2 yyy ssss
1 3 ttt wwww
2 1 323 dddd
2 2 eee qqqq
2 3 rrr pppp
Based on which Machine_No i pick, i would like to display it's Board_Mode and Board_Data for all Board_No values (1,2,3)
i will be able to display this on the same form. (say machine_no = 1)
Board_Mode Board_data
1 xxx xxxx
2 yyy ssss
3 ttt wwww
I'm this is a simple issue. I have a combo box which can have the following status's: Not Started, In Progress, Complete. Depending on the value of the combo box i want a different image to show. So if not started is selected i want the user to see a red box. If Complete is chosen, a green box will show. i can do this easily enough but my problem comes in when i go to the next record. The boxes just stay visible regardless of what option is displayed. What event is triggered when you go to the next form?? Form Open / Load doesnt seem to work.
:mad:
:confused:
I am trying to display a total based on 3 separate combo boxes in a form. there is a name with an associated number value using 2 fields. the values come from a linked value spreadsheet. the name field is "text" and the number is "number". the user selects their name and number using a combo box drop down window. this occurs 3 times in my form and i want to sum them in a 4th combo box. this is about how it should look, where "Total" happens automatically depending on the name selected.
Lewis 3 Smith 2 Parks 2 Total= 7
thanks for helping.
dave
I am making a database, but lets say I have 12 locations and have say between 2-100 named people at each location.
I want to be able to link 2 databases together.
I can use lookup wizard to select either a location, but I also want access to display the names at ONLY the location previously selected (IE: Paul and Bert are in Brazil, Steve and Carl are in Cuba, I want once Brazil is selected only Paul and Bert to appear as options). I'm sure it's fairly basic but a having a little trouble with it, and not knowing the technical terms is making it hard to look up.
I have a form with about 30 controls. I organized it carefully so that all the controls show on a single page. It actually looks really good. However, several of the controls allow multiple values. These appear as a check box showing up beside each item in the list from which these controls take their information. When I run a Filter by Form process, the form flawlessly pulls the data from the table that I'm seeking, and the check boxes are visible, both the ones with checks and without. In a few cases, in order to fit everything onto one page, I have most of the related list hidden, and use scroll bars. This works really well for data entry and for editing individual records.
Where it DOESN'T work like I want it to is in situations where the checked item(s) in the multi-value control don't show up in the box on the form without scrolling. In the table where these multi-value fields actually live, what shows up is just the code for each option, a simple numeral, with commas separating any multiple values. Is there a way to make my form show only the selected codes like in the table? My suspicion is that I'm going to be told no, that the best way to do this is to use a report and query.
I have created a from which consists of search boxes in the above and the table in the below.
If we search for any in those search boxes then the results will be displayed at the bottom (The results will be displayed in the table which is located at the bottom of the page)
I had done with the above part.
My Requirement :
If I click on any of the row in the results table then is it possible to display only the selected row in a new form????
If I search for a keyword MS in a search box and if it returns 40 results and if I click on any one of the result then the selected result should be opened in a new form.
Attached is my file...
In Access 2010, if you have a form with a subform in datasheet view, and you move the focus away from the subform, how can you tell which record(s) on the subform are selected?
When the subform has the focus, the selected row is shown with a blue/grey tint. But as soon as the subform loses the focus, this disappears and all rows look identical.
Its an issue as I have 2 datasheet subforms on my main form, with the 2nd showing records related to the record selected in the 1st. But as soon as the 2nd subform receives the focus, it is impossible to see which record in subform 1 was selected.
I have tried conditional formatting, but that does not work.
To start, I am going to generalize to a database of Cows. the fields are:
Name (enforced unique/"Primary Key" in access language?),
size,
color,
age.
The goal is to have a form with check boxes for the fields that the user selects. Scenario is one cow buyer cares about size, while another may care about color and be curious on age. So rather than guessing at what reports the users will want, have a form that allows them to select the fields they want then print a report. An intermediate step would be a query to filter the data.
See the picture below ....
Also, from my perspective, this is the basis of the best code i would write; if someone wanted to add a column for cow gender you wouldnt have to change all your forms/queries/reports:
Global import table.Cows
Form 2 in picture (form with check boxes):
for ( i=0, i<width(Cows), i++)
form.create.checkbox cb.append(i)
cb.append(i).label(Cows[i])
Then create the report based on cb0, cb1, cb2, etc. queries
I have a folder with Access files, subfolders, and some .vbs files in it. It requires one person to navigate through a setup process. Once the setup is completed, they need to copy the folder and its contents to a location on a shared drive, which is unknown to me and will be chosen by the user at the site. There could be many sites.
It basically works like this:
Files are downloaded to C:Program Files.
A vbscript is run and extracts a folder directly to the C:Drive and opens it. I'll call it C:Test.
The user manually moves the BE file to a shared drive.
The user opens the FE file and is walked through using the Linked Table Manager.
The user then follows a series of forms to input data.
After this, the FE closes and another DB opens.
The second DB walks them through the Linked Table Manager and closes.
Option #1 At this point I would like to have a script and have it copy that folder, C:Test, and its contents, and have a dialog box open telling the user to paste it in a location where all users have access to.
Option #2 A script that will backup the folder and all its contents to a shared location selected by the user.
Either option will l allow others to navigate to that location, copy the folder, and paste the folder to their C: Drive.
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
View 2 Replies View RelatedI have created a Db in MS Access 2010 and under Options > Current Database I have done the following:
- Used drop down to select a form I want to display on opening
- Unchecked display navigation pane
- Unchecked allow full menus
This works how I want it to, perfectly. I then send it to a client who also has MS Access 2010 and when they open the file the form I have told it to open doesn't open, the navigation bar is displayed (with the form I want to open highlighted) and the full menus show but are locked.
What's going on? Is it some security setting the client has that isn't letting the opening procedure execute properly?
Is it possible to have the user select which field is added to the query through a parameter? In my query I have a table where each record has a part number and has sales number for each month. When the user runs the query I want them to be able to select which month is returned.
My table basically looks like this:
PartNumber,Jan,Feb,Mar,Apr,May etc.
01PartNumber,15,20,30,25,28 etc.
02PartNumber,12,14,12,16,20 etc
I want the user to enter "Mar" when prompted and return the parts numbers with values from "Mar".
Access 2007
I have a form that has four textboxes, date dropdown box and a date box. I am trying to get the form to do the following: Block user from writing in the textboxes if they have not selected a date in the date box.
Get the datebox to look at the behide screens records to see if there has already been a documented date (duplicate date) and inform the user that this date has already been used. Then auto them to the date dropdown.
I am using this code
DoCmd.OutputTo acOutputReport, "rptFilter", "Excel97-Excel2003Workbook(*.xls)", strFilename, True, "", , acExportQualityScreen
With the OutputFile set to "" so the user can select the directory on where they want to store the exported template. I'm trying to figure out if I could get the file path and the file name and store it on a string so I could use it for something else.
I have an access form. It has
-Two textboxes with client first and last name
-Two textboxes with a contact 'email1' and 'email2' for the client
-A combobox with a list of templates to use for the email.
-A checkbox to include a copy of the statement on the email.
I want the user to be able to press a button which does the following
-Sends an email to both 'email1' and 'email2'.
-Attaches a secific report as PDF if the user has selected the checkbox
-The body of the email includes a greeting line using the clients name from the record.
-The body of the message includes below the greeting line a html email template depending on the users combobox selection.
Access 2007-10
Listbox created: List62 (I know I need to rename it, but for now)
Multi-select: Extended
Row Source Type: Field List
Row Source: qryFieldList
Open Query: qrySelectedFields (I added primary key to first column, just to have at least one destination field).
Goal: to select multiple fields within listbox, click on command button to open query "qrySelectedFields" with selected fields from list box.This is the code I have on the command_click:
Dim varItem As Variant
Dim strSQL As String
If Me.List62.ItemsSelected.Count = 0 Then
MsgBox "Please select one or more fields.", vbExclamation, "Healthcare REIT"
Me.List62.SetFocus
End If
[code]....
It does absolutely nothing - doesn't add the fields to "qrySelectedFields", doesn't open the query, notta.
I'm trying to create a form which filters a report based off of combo boxes selected by the user. The code I'm using currently is:
Code:
DoCmd.OpenReport "rptProgramAttendees", acViewReport, , "ProgramIDFK = " & cboProgramTitle
This works great to return a report if the user selects something from the combo box. How do I adapt this so that the user can also leave the combo box blank and filter the report to return all records?Additionally, what if I want to have the user filter between dates selected on the form; i.e. between 'txtStart' and 'txtEnd'
I have a form that request information from the user (StartDate, StartTime, EndDate and EndTime) the problem is that it's not working. The only way I can get any data to show is when I remove the StartTime and EndTime. Only then will it pull the items from the StartDate and EndDate.
Here is what I have as my criteria: Between [Forms]![OpPROD_ALL]![StartTime] And [Forms]![ OpPROD_ALL]![EndTime] And Between [Forms]![ OpPROD_ALL]![StartDate] And [Forms]![ OpPROD_ALL]![EndDate]
The users will be able to request a report based on a start and end date along with a start time and end time.
Side note: this is to pull date for 3rd shift (Example) 4/14/2013 10:00PM - 4/15/2013 10PM
I have two related tables
1 Donor and
2 Donations with fields date, donor, fund and amount
I want a form to display donation details in datasheet view of fund and amount for a selected date and donor...
Is there a way to run a query against a table that would return the column names, no data just the column names.
Thank you for any help.
Hello All,
I have set up security my users. What I am wanting to do is when the record has been modified or changed it displays the user that is signed in as making the change. I have Time and Date set up this way. How can I have the user displayed as well.
Thanks,:D