Display Real Time Now() Etc.
Aug 31, 2006
Detailed search cannot answer my time problem. Returning after long break in programming, I am trying to create a form to display TimeIn and TimeOut fields such that actioning an OnClick command (or separate tick-box), TimeIn field will hold current time for that record. Need to set the same for a TimeOut field. Both cases time always to be < 24 hours.
Am so rusty on MS Access putting default value as =now() produces an error!!
Any basic help to wind up the old mind always appreciated.
View Replies
ADVERTISEMENT
Aug 15, 2006
I am trying to display a total based on 3 separate combo boxes in a form. there is a name with an associated number value using 2 fields. the values come from a linked value spreadsheet. the name field is "text" and the number is "number". the user selects their name and number using a combo box drop down window. this occurs 3 times in my form and i want to sum them in a 4th combo box. this is about how it should look, where "Total" happens automatically depending on the name selected.
Lewis 3 Smith 2 Parks 2 Total= 7
thanks for helping.
dave
View 3 Replies
View Related
Sep 17, 2006
Hi:
I try to get the value in a real time. There are two subforms inside a mainform. First user enters value into mainform. Than comes to subform1. And after that on the basis of a choice in subform1, the 2nd subform is open. In 2nd subform i create a listbox with that query.
SELECT [tbl_Events].[PPVVOD_Outlet] FROM tbl_Events WHERE [tbl_Events].[ticketnum]=[Forms]![tbl_PPVResearch]![ticketnum];
But it shows empty. [tbl_Events].[PPVVOD_Outlet] is a subform1
View 1 Replies
View Related
Mar 4, 2006
Greetings!
Hoping somone could help me here.
I am trying to create a database (duh!). At the moment, I have two tables. One table is a small timetable with the fields:
Day, Airline, Flight Number, Time, Origin, Destination, Aircraft
The other table (Delay) has the following fields:
Date, Day, Airline, Flight Number, Time, Origin, Destination, Delayed by.
I would like to do the following. In Delay I put in the date: 01/07/2005, fine. The Day (field format Date/Time dddd) is also 01/07/2005 which Access transofrms into the word "Friday". Airilne is BA. In Flight Numbers, I want the database to do a query on "TIMETABLE" to search all flights that operate on a Friday as some do not operate daily. (By the way in the 'Day' column of Timetable the values are "Monday Tuesday Wednesday Thursday Friday Saturday Sunday" or "Monday Thursday Saturday" depending on the flight). This query/lookup should be performed right after I type 01/07/2005 in the "day" field of "Table: Delay". A lookup combo box should be displayed when I arrive at the field FLight Number. I select a flight (e.g.: BA001) and automatically the Time, Origin and Destination of the flight should appear in the "Table: Delay".
I have been unsuccessful at even getting past the first hurdle. I tried a query of the "Table: Timetable" and fields "Day" and "Flight Number". The Criteria I do not know what to put in. "Like [Delay]![Day]" or "[Delay]![Day]" does not help and brings up nothing. However, "Like *Monday*" does bring up all the flights which operate on a Monday. However isn't there some way of telling the query to automatically occur after I type in the relevant day in the "Delay" table? Futhermore I would like to avoid (but not totally exclude if it's impossible) macros as eventually I hope to publish this to SQL or whatever.
Cheers in advance.
View 1 Replies
View Related
Dec 9, 2005
Okay, seems like it should be simple... maybe I'm wrong though:
Any one know how to do real-time counting of the number of characters in a text box so that once it reaches 3 it automatically moves to the next text box? (Doing a phone number ... area code (int) and phone (long) to make for a total of 6 bytes.)
I've tried several versions of code for the on-change event but I can't seem to find the right way to assess the number of characters currently in the control... I'm pensive about setting an invisible control to just 'count up' because the on-change event would stack it even with a deletion. See most recent attempt below...
Obrigado,
~Chad
Private Sub txtAreaPhone_Change()
Dim bytCount As Byte
Dim strAPhone As String
If IsNull(Me.txtAreaPhone) = False Then
strAPhone = Cstring(Trim(Abs(Me.txtAreaPhone)))
bytCount = Len(strAPhone)
If bytCount = 3 Then
Me.txtPhone.SetFocus
Else
End If
Else
MsgBox "This is Null"
End If
End Sub
View 1 Replies
View Related
Apr 2, 2013
I have a form which im using to store records about companies that I have mailings with. The company name is my unique field as no two companies should have the same name. This form is accessed by several different people and data is input so I dont want duplicates of the company name being produced. Currently, the form wont save a record if it is duplicated but by then I would have filled out the entire form and wasted my time. Is there a way to do the following:
As I enter the company name it would look up exisitng company names. eg if i wanted to enter a new company called 'Dans Plumbing', I would type 'D' and below the text box would display a load of existing records starting with D. after that when I type 'Da' it would only display records starting with Da and so on. All being well, when I have finished typing the company name there should be nothing underneath so that I instantly know its not a duplicate and vice versa.
The possible duplicate doesn't have to be underneath it could auto complete IN the text box a bit like the address bar on a web browser.
View 4 Replies
View Related
Jun 3, 2014
Is it possible to pull the data real-time? I have this access database, and I need to pull the data every time it was updated.
Process name is given, I need to pull the time according to the process name and the volume,
Attached files is the output. The output should be in a form.
View 1 Replies
View Related
Sep 29, 2014
I would like to create a combo box (or something similiar if a combo box simply can't do it) where the list of choices in the pulldown shows only the matches of what a user types in. The list of choices are coming from a field in a table. Also I would like the "search" of the user's input to include what is "within" each choice, e.g. if a user type "ber", then valid results should be bertha, october, robert.
View 1 Replies
View Related
Jun 28, 2005
hi, i have created a form and would like to display todays date and time in the following format
Mon 6 June 2005 24:00
this will literally be just on the form, no link to anything or any extra dynamic features. just there for the user's benefit
if anyone could tell me the steps that need to be taken, im guessing some formatting will need to be done, or some script will need to be placed in the form event code builder.
i have only recently focused my attention on ms access so a descriptive but to the point explanation will be ideal thanks
View 4 Replies
View Related
Sep 4, 2005
i want to display time remainig on my quiz form
say quiz has a total time of 15 mins
so i want to show the time on my form
so the user know how much time he/she got
i did search th eforums but couldnt find any
sorry if it is here already
if it is can some on epint it for me
thanks in advance
View 8 Replies
View Related
Aug 31, 2004
I have two fields in a form that are both bound to the same date/time control source. One is for the date, one for the time. Using the format and input mask properties is some help. But when the focus is on the field the entire date + time displays. I would like the date field to show just the date portion and the time to show just the time portion, but haven't figured out how yet.
thanks, roy
View 5 Replies
View Related
Nov 5, 2004
I'm making a dispatch call database that will be sorted at the end of the month based on call types and which shift that call was originated on. Our shifts are 6a-2p, 2p-10p, 10p-6a.
I am figuring that the time would be converted to minutes and then the display would be figured based on which times the minutes occured between. IE: the call origintaed at 0100hrs = 60 minutes. It would figure that 60minutes translates to "Night Shift".
How would I convert time into minutes and how would the if/then be established?
Thanks so much for all your help
Dave
View 1 Replies
View Related
Mar 19, 2015
I've got a report displayingg appointments, only issue is that it doesnt display these times or date in order of earliest first...
View 6 Replies
View Related
Jun 25, 2014
What I want is for the "Time In" column in the listbox to show the time as hh:mm, just like the other two. The listbox is pointing to the table correctly, as evidenced by all the data showing up, but what floors me is despite the "sign_in" table showing time in all three columns in the desired format of hh:mm, the listbox seems to have its own thoughts about how to display the called data.
View 7 Replies
View Related
Feb 19, 2008
I want this expression to form a value of a field on a query...
I know that what I want is something like this:
arrangedActivityName: [activityDate]+", "+[activityTime]+", "+[activityId]+", "+[venueName]
When I do it though, its shows "#Error" in the field.
I'm guessing that its something to do with the fact that date and time are not strings or ints therefore cannot be displayed. How can I fix this?
Does anyone know how I can do it?
Thanks, Ant...
View 2 Replies
View Related
Aug 6, 2014
I have a form thats already created. I would like to put a box or something next to a button so I can monitor when the last time the button was pushed. Ive seen it somewhere before and never took a moment or a need to see how it was put together.
View 2 Replies
View Related
May 21, 2015
I would like to make a query that count simultaneous connection.
Here is my tables
Users (ID_User, Name)
Date_logon (Id_on, Date_logon, time_logon, Num_user#)
Date_logoff (Id_logoff, Date_logoff, time_logoff, Num_user#)
Here is a part of a query that display users date and time of log on and log off.
Users Date_logon Time_logon Date_logoff Time_logoff
Utilisateur1 13/05/2015 17:38:42 13/05/2015 18:52:15
Utilisateur2 13/05/2015 17:12:21 13/05/2015 17:30:24
Utilisateur3 13/05/2015 16:59:08 13/05/2015 17:16:06
Utilisateur4 13/05/2015 16:54:14 13/05/2015 18:32:13
Then I put that result in a pivot table in Excel. In line we have time logon by date and in column we have time logoff by date.
Here is the issue : In Excel for the 4 lines above, it counts 2 logon at 4PM and 2 logon at 5PM. We should have 4.
View 14 Replies
View Related
Jan 4, 2013
I have a database being used to track and bill therapy units. I have a table that stores the pre-authorizations that tells me within a [start date] and [end date] I am limited with X amount of units (that is all the client's insurance and/or funding source will pay for within the time period). I also have about 4 different codes I can be authorized for which is also stored in this table - each code a separate pre-auth record.
Another table is where I enter in the type of therapy (service code) I've completed with the client. I put in the Service date, start time and end time and it will automatically give me the amount of units to bill (1 hour=1 unit). If I happen to choose a code or enter in a service date that does not match up with a client's pre-auth (Service date is between start date and end date and matches code from pre-auth table) I have a simple text box that says "No auth for this code or service date" due to an IIF statement in a query. I'd like to take this a step further and give me the remaining units for the pre-authorization left when it does find a match.
What is happening is when it finds the authorization, it's not taking into consideration all the services I've done for that time frame. For example: I have a pre-auth from 12/1/12 to 1/31/13 for code 90806 for 12 units. I served the client for that code a total of 10 units thus far. I can't figure out how to link my 4 service records dated 12/3/12 (2 units), 12/16/12 (4 units), 12/27/12 (2 units), and 1/3/13 (2 units) to add together and then subtract from my auth for 12 units. I know the dates are the key but I'm lost.
View 3 Replies
View Related
Jan 27, 2015
I have created a button to display the current time ( sign in and out).
It works fine with this code Me.field = time$
However i need a code beneath it to run the actual query that will display this time onto the table...
I have attached an image of one of the query, I need it to run.
View 5 Replies
View Related
Jul 7, 2015
I have a query which is displaying a date/time field a record was input. in my query I'd like to only display the records where the date/time based on what today is i.e. Monday it will display <Friday or yesterday for Tue to Fri.
View 7 Replies
View Related
Sep 18, 2013
I have a query that displays the start and finish time for an activity, I am trying to display the reults of the time between each activity....
For example
Name start End
aaa 14:07 14:09
aaa 14:11 14:12
The end time for the first activity was 14:09 and the next job was started at 14:11, so I want it to display 00:02: - (elapsed time)
Its very easy to do in excel as it would be =SUM(B2-C1) but haven't a clue how to do it in access.... is there any way?
View 3 Replies
View Related
Jun 30, 2013
I have set up a form and only want to display the date and time that will appear automatically based on when the record was created. I definitely don't know how to do this.
The format that I'm looking for is: 07/24/13 11:45:44pm
From what I can see I would need two separate fields to accomplish this. I would prefer to only use one if possible. I would like to execute the value within the new record as it is entered. That date and time from that point should never change.
I will want to use the date and time in the future for quality control.
View 3 Replies
View Related
Jul 27, 2013
Component that is capable of putting a timeline on an Access form and displaying records with a date-time field.
What I want, is for example:
tabevents contains two basic fields:
eventtime (datetime)
eventname (string)
eventcomplete (bool)
What I want to place on the form is a visual timeline which calculates the time between the first and last event and places all events accordingly along the line, spaced out, ideally with an arrow/marker that moves along the line as time progresses, highlighting any events that haven't been marked as complete. Double clicking on the event would allow us to mark it as complete.
I know this is a long shot, but thought it worth seeing if such a thing exists.
View 1 Replies
View Related
Aug 20, 2013
All, using access 2010. How do I display the default value of a date/time field to just the current year instead of using =date() to get the full date.
View 5 Replies
View Related
May 19, 2006
BACKGROUND
The current challenge I have in MS Access in really giving me a headache. I can’t seem to find an answer or indeed think “outside the box” so I am hoping there is someone who can help.
Below I will outline the design of my database, the problem I have and my proposed solution. My solution is “What I want to do” rather than “How I do it”. If you have the time and patience to look at my problem and suggest how I proceed, I will be really grateful.
CURRENT DATABASE DESIGN
I created a database that imports daily telephone data. The design below is a simplified version of the real thing but it contains the essential information needed to understand my database.
I extract data from the phone system for “Lines” (3 digit code) e.g. ‘301’,’302’ which each have a corresponding line “Description” e.g. ‘New Customers’, ‘Accounts Queries’. There are three main daily extracts (1) Inbound Calls (2) Outbound Calls and (3) Time. Each extract has either “Line” or “Description” as the unique identifier but not both.
There are 50 lines with matching descriptions and each is allocated to one of 20 teams. I have a query which links all three extracts, groups the data by team and date. Therefore this query creates 20 records (teams) for each day (date).
CURRENT QUERY AND TABLES
Tbl Line Lookup (50 records)
Line
Description
Team
Tbl Inbound Calls
Line
Date
Offered Calls
Answered Calls
Abandoned Calls
Tbl Outbound Calls
Description
Date
Outgoing Calls
Tbl Time
Description
Date
Answer Time
Abandon Time
Talk Time
Wrap Up Time
Qry Grouped By Team Daily
Line – linked to line in Tbl Incoming Calls
Description – linked to description in both Tbl Outgoing Calls and Tbl Time
Team – Grouped field
Date – Grouped filed
Offered Calls - Sum
Answered Calls - Sum
Abandoned Calls - Sum
Outgoing Calls - Sum
Answer Time - Sum
Abandon Time - Sum
Talk Time - Sum
Wrap Up Time - Sum
PROBLEM
Customer Services “Team” is made up of six lines (301-306) and Business Partners “Team” is made up of three lines (307-309). For each day my query creates a record for each of these teams based on how the line is allocated in Tbl Line Lookup.
The business had decided that line 304 calls are part of the Business Partners with effect from 01/05/06. If I change the team name associated with 304 in Tbl Line Lookup this will, incorrectly, allocate all information (from 01/01/06 to present) to Business Partners.
I need a mechanism to allocate 304 to Customer Services prior to 30/04/06 and to Business Partners after 01/05/06.
PROPOSED SOLUTION
I want to introduce a new field in Tbl Line Lookup called Effective Date.
Tbl Line Lookup (50 records)
Line
Description
Team
Effective Date
Then I want to introduce a new query which links the data in the three data tables and allocates the correct team name by comparing the date in these extracts with the effective date in the Tbl Line Lookup.
I would then run my original query (Qry Grouped By Team Daily) over this query instead of the original tables.
Please can someone tell me if it is possible to look up values in another table to determine the value of a field in the way I have described?
View 5 Replies
View Related
Nov 9, 2006
Hi,
This is what i want to do:
Have a button on a form that when pressed opens a file browse, allows you to pick a text file (May contain different values and in future the structure may change slightly), then import the text file contents into a temp table (2 fields, Setting & Value), then run a query to take different values from the temp table and put them in to different fields in to different tables linked to the same main record where the button is, then save the record and all linked tables data, and then delete the temp table, and display a message box saying something like done.
Each import file will be a single record, but has to many fields to be in one table
I also need to extract only part of Field 1 (Sample Below), the part after the = (150 in below)
0x6A,0x10,0x12 = 150
Thanks
Dan
View 14 Replies
View Related
