Display Rows With No Data
Aug 22, 2005
I have a query which is grouped by year, facility name, and billing type and needs to display several columns of aggregate values for each of these, e.g. count of cases, sum of cases reviewed, average length of stay, etc. It would look like this:
2003 ABC Hospital Billed DRG 123 22 6.5
2003 ABC Hospital Billed Per Diem 23 0 4.2
2003 DEF Hospital Billed DRG 456 120 12.3
2003 DEF Hospital Billed Per Diem 56 10 2.1
However, if a facility does not have any Per Diem billings for example, how can I generate a row for it anyway? I cannot use a crosstab since I have multiple different values to display. I tried the following union query:
SELECT YR,FacilityName,BilledDRG,NumberOfCases,AverageLen gthOfStay,CasesReviewed,CasesDenied,AvgOflos,[Billing Eligibility] FROM qryDistHIVCasesStatsDAC
UNION SELECT YR,FacilityName,BilledDRG,0,0,0,0,0,null FROM qryDistHIVCasesStatsDACDRG
UNION SELECT YR,FacilityName,BilledDRG,0,0,0,0,0,null FROM qryDistHIVCasesStatsDACPD
ORDER BY YR, FacilityName, BilledDRG;
where qryDistHIVCasesStatsDAC
is the original query,
qryDistHIVCasesStatsDACDRG shows the year, facility name, and "Billed DRG"
qryDistHIVCasesStatsDACPD shows the year, facility name, and "Billed Per Diem"
but then I would get e.g.
2003 ABC Hospital Billed DRG 123 22 6.5
2003 ABC Hospital Billed DRG 0 0 0
2003 ABC Hospital Billed Per Diem 23 0 4.2
2003 ABC Hospital Billed Per Diem 0 0 0
2003 GHI Hospital Billed DRG 456 120 12.3
2003 GHI Hospital Billed DRG 0 0 0
2003 GHI Hospital Billed Per Diem 0 0 0
what I want is:
2003 ABC Hospital Billed DRG 123 22 6.5
2003 ABC Hospital Billed Per Diem 23 0 4.2
2003 GHI Hospital Billed DRG 456 120 12.3
2003 GHI Hospital Billed Per Diem 0 0 0
In other words, for each year, each facility should have a row "Billed DRG" and a row "Billed Per Diem" and only one row of each.
Thanks for your assistance. I hope I have explained this adequately.
View Replies
ADVERTISEMENT
Jul 28, 2014
I'm trying to make a sub form that displays the hours of an employee selected in a listbox. I've got most of it working but having a bit of an issue.
The info for thre query is in 3 tables:
tblStaff (name etc)
tblShifts (start and end times for days that this employee works)
tblDays (a list of days names so I can use numbers elsewhere)
My query looks like this:
Code:
SELECT tblDays.dayName, IIf(Nz([startTime],"")="","NWD",[startTime]) AS start, IIf(Nz([endTime],"")="","NWD",[endTime]) AS [end], tblStaff.staffName
FROM tblDays LEFT JOIN (tblStaff RIGHT JOIN tblShifts ON tblStaff.staffPK = tblShifts.staffFK) ON tblDays.dayPK = tblShifts.workingDay
WHERE (((tblStaff.staffName)=[Forms]![frmMain]![lst_myTeam] Or (tblStaff.staffName) Is Null));
This worked fine with a single user and some test data - it correctly displayed all days of the week, with start/end times on Mon and Tues where I had entered shift information, and "NWD" against all other days.
However, when I add a couple more employees to the mix it shows the correct info for the first employee, but anybody else it will only display days where person 1 doesn't have any hours. I haven't entered any hours for the new employees, but the query should still display Mon-Sun with NWD in every column. It shows Wed-Sun but Mon and Tues are missing.
I've tried different join types but they all come back with "ambiguous joins" error when I try to run.
View 4 Replies
View Related
Jul 10, 2013
I have a cross tab query that displays data by customer (rows) and MONTHS (columns).
However I need the columns to be the 12 months of the year 1 to 12.
However, if the selected data for a particular customer does not have any records in a month then I get an error in the report as the cross tab query only selects the months with data.
How do I get the report to show 0 or a blank in these columns
View 2 Replies
View Related
Mar 20, 2005
I have a two tables in my database related to employee ratings
Employee
TokenID
Division
Band
PMRating
TokenID
H1
Now this statement
Code:SELECT DISTINCT Employee.Band FROM Employee
This would display me all the band levels within Employee table in each row..
Is there any way I could built a query to the Band names as seperate columns?
i'm doing this so as to display the average H1 rating for each Band level ..that is grouped by Employee.Division..
View 2 Replies
View Related
Feb 6, 2014
i have 3 simple tables as follows:
Table1:
OwnerID, Owner_LastName,
Table2:
TenantID, Tenant_LastName,
Table3
ID, Date, Amount, OwnerID, TenantID
I need query to display ALL the rows from Table3 and show columns of Owner_LastName and Tenant_Lastname. However, I want the rows in Table3, that do not have the value for TenantID to still appear, just with Tenant_LastName being left blank.
View 3 Replies
View Related
Sep 12, 2013
I think the answer to this question is going to be a flat 'No', but here we go.
I want to have something like a datasheet, except with with records shown as columns instead or rows.
For clarity, a datasheet displays records as rows, like this:
field 1 field 2
record 1 record 1
record 2 record 2
I'm wanting to present the data the other way around, like this:
field 1 record 1 record 2
field 2 record 1 record 2
Just to complicate matters, the number of records to be displayed is variable, so it should add more columns as required.
About the only option I can think of is to create a subform with fields stacked in a column without labels, and try to dynamically stack the forms as needed, hooking them up to the correct data on the fly.
Alternately, I wondered if I could dynamically generate a recordset with each record containing the field value of multiple records. I can see myself getting into trouble trying to update data this way however.
View 1 Replies
View Related
Sep 27, 2013
I have created a form and a subform from a table.
Initially I created a table with 11 rows. After completion of my project I added an extra of 480 rows to the main table. But the newly added rows are not coming in my subform.
Attached is my project.
Main : Main table (It consists of around 491 rows)
MForm : Main Form (It shows of only 11 records which I was 1st created)
How to refresh my subform inorder to display all the rows.
View 11 Replies
View Related
Mar 25, 2013
I have a result for a query made from four different tables for which I would like to refine the result of this query grouping multiple rows into columns.
Attached is a pdf file showing the results being obtained by my query and underneath is how the result would like it be after running the query.
I am currently using Access 2010.
View 5 Replies
View Related
Jan 25, 2015
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
View 3 Replies
View Related
Sep 27, 2007
Column A Column B Column C Column D
1*010101001000000 CF 5
010101002000000 RF
010101002000000 RF
010101029000000 CU
1*010101001000000 CF 10
010101351010000 RF
2*010101354000000 CF 11
2*010101354000000 CF 13
010101358000000 CY
1*010101001000000 CF 5
010401328100000 CF
NOTE in the actual data won't be there it is just to show you what I am referring to.
Is there any way in another column in a query to say if Column A repeats itself somewhere else in Column A AND if those two that are repeated both have a "CF" code add column C (which is just an amount for each number)
So for example in this data there are 2 numbers that repeat themself that have CF codes. For these I would need to total them in column D for the first number resulting in:
Column A Column B Column C Column D
1*010101001000000 CF 5 20
010101002000000 RF
010101002000000 RF
010101029000000 CU
1*010101001000000 CF 10
010101351010000 RF
2*010101354000000 CF 11 23
2*010101354000000 CF 13
010101358000000 CY
1*010101001000000 CF 5
010401328100000 CF
Any ideas?
Thanks,
Mike
View 14 Replies
View Related
Mar 11, 2007
Hi, I have data from a form on my website in a text file, that corresponds to each visitor's input, each 13 lines in the form belongs to one visitor, as shown (twice) at the end of this message.
What I would like to do is have each visitors inputs translated to ONE row, with 13 columns/fields each. It could be appended to the same table or preferably generated in a new one. Note, there are no blank fields, some won't have data after their title, i.e. addy_line_2: is often blank, but at the very least, addy_line_2: or another field name is always there.
It would ROCK if I could also automatically take the name of each field out, i.e. each name is continuous characters up to the : (colon) ...
Thanks in advance, my Access knowledge is obviously limited, I'm sure this is fairly simple!
The fields:
Phone: 213-555-1212
Submit: Continue
addy_line_1: 1000 Melrose Place
addy_line_2:
badge:
city: Los Angeles
email:
homegroup:
name:
program:
state: CA
volunteer:
zip:
Phone:
Submit: Continue
addy_line_1:
addy_line_2:
badge:
city:
email:
homegroup:
name:
program:
state:
volunteer:
zip:
thank you thank you thank you thank you thank you !!
View 1 Replies
View Related
Jun 27, 2005
Hello all,
I have a crazy question. Is there a way to write a query that would display data rows with common ID's as if they were columns in a query? It's for visually representing row data as if they were one record in a list. Basically, I would like to take the following data...
fldID fldDetail fldValue
1 Shape Round
1 Color Blue
2 Shape Square
2 Color Red
And display it in a recordsource like each is one record:
ID Shape Color
1 Round Blue
2 Square Red
Is there a way to do this? HTMS.
View 2 Replies
View Related
Jan 19, 2006
Hi everyone,
I can't get my head around this so I'm looking for some help if possible please, there are two questions, the first is:
When in the query, I want the criteria for the date selection to be a question, ie. "[Week Start Date?]" but I want the actual criteria selection to be from the start date plus 5 days, the only way I've done that so far is to do ">=[From?] and <=[To?]", which uses two questions and I don't seem to be able to do ">=[Week Start Date?] and <=[Week Start Date?]+5" which seems basically correct, but I expect I'm writing it incorrectly (basic access knowledge I'm afraid :( )
The second question (after I've got the 5 day date criteria sorted) is that the query produces a table that shows basically the following:
Name Store Date Visited
Tom Bury 18/01/06
Tom Bury 19/01/06
Tom Diss 20/01/06
Dick Thetford 18/01/06
Harry Diss 20/01/06
The query is based on a part week period with the starting date ALWAYS a Monday, so no more than Mon-Sat will appear, I want to put the information into a table or query, so the result ends up as:
Name Store Mon Tue Wed Thu Fri Sat
Tom Bury 18/01/06 19/01/06 'Blank' 'Blank' 'Blank' 'Blank'
Tom Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
Dick Thetford 18/01/06 'Blank' 'Blank' 'Blank' 'Blank' 'Blank'
Harry Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
*Where the blanks are simply left empty, rather than putting in the word 'blank'
Essentially converting the "[From?]" (as stated earlier) or "[Week Start Date?]" to Monday, that date + 1 to Tuesday, etc, BUT putting multiple dates relating to name and store criteria onto one record :eek:
Beyond me I'm afraid, any pointers would be seriously appreciated, I expect I'm approaching the problem from the wrong angle.
Regards
Tony
View 1 Replies
View Related
Jan 19, 2006
Hi everyone,
I can't get my head around this so I'm looking for some help if possible please, there are two questions, the first is:
When in the query, I want the criteria for the date selection to be a question, ie. "[Week Start Date?]" but I want the actual criteria selection to be from the start date plus 5 days, the only way I've done that so far is to do ">=[From?] and <=[To?]", which uses two questions and I don't seem to be able to do ">=[Week Start Date?] and <=[Week Start Date?]+5" which seems basically correct, but I expect I'm writing it incorrectly (basic access knowledge I'm afraid :( )
The second question (after I've got the 5 day date criteria sorted) is that the query produces a table that shows basically the following:
Name Store Date Visited
Tom Bury 18/01/06
Tom Bury 19/01/06
Tom Diss 20/01/06
Dick Thetford 18/01/06
Harry Diss 20/01/06
The query is based on a part week period with the starting date ALWAYS a Monday, so no more than Mon-Sat will appear, I want to put the information into a table or query, so the result ends up as:
Name Store Mon Tue Wed Thu Fri Sat
Tom Bury 18/01/06 19/01/06 'Blank' 'Blank' 'Blank' 'Blank'
Tom Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
Dick Thetford 18/01/06 'Blank' 'Blank' 'Blank' 'Blank' 'Blank'
Harry Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
*Where the blanks are simply left empty, rather than putting in the word 'blank'
Essentially converting the "[From?]" (as stated earlier) or "[Week Start Date?]" to Monday, that date + 1 to Tuesday, etc, BUT putting multiple dates relating to name and store criteria onto one record :eek:
Beyond me I'm afraid, any pointers would be seriously appreciated, I expect I'm approaching the problem from the wrong angle.
Regards
Tony
View 2 Replies
View Related
Jun 30, 2006
Hi all,
I have a query which runs off a table. I have the following Fields as columns in query: WeekID, A, B, C, D, E
For each week, the letters correlate points given. So for week 1, "A" could have 1 point, "B" could have 3 points, etc.
I want to run a Query that will show A, B, C, D, E as rows like the following:
Letter_Week 1_____Week 2_____Week 3
A_______1_________5___________3___
B_______3_________4___________2___
C_______2_________1___________7___
D_______6_________3___________3___
D_______3_________1___________4___
I can't run a crosstab because it will only crosstab values within all of A, B, etc.
Any idea guys? Thanks in advance, as always.
Caliboi
View 3 Replies
View Related
Apr 6, 2014
I need to change rows data into column.
I have a table name as Temp_Report1 with fields Lab_No, Test Name, Reslt, Test_master
Lab_no
Test Name
Result
Test_Master
4.414
Hemoglobin
00
HAEMATOLOGY
4.414
Red Cells
01
HAEMATOLOGY
4.414
E.S.R
02
HAEMATOLOGY
4.414
Reticulocytes
03
HAEMATOLOGY
etc
The another table where I want to copy data is New_repo2 with fields Lab_no, v1, v2, v3 etc. Need as
Lab_No
V1
V2
V3
V4
V5...
4.414
Hemoglobin
Red Cells
E.S.R
Reticulocytes
Etc
How to change this from rows to one column.
View 1 Replies
View Related
Jul 19, 2015
I have data for multiple account numbers (for work) and dates, and I need to identify when there is a change in account number in order to add a new field with a count - which counts sequentially starting with 1 and then starts over at 1 when the account number changes.
Ex. The red column is what I am trying to create
Account Date_To Counter
12345 06/30/2015 1
12345 05/31/2015 2
12345 04/30/2015 3
19999 06/30/2015 1
View 2 Replies
View Related
Dec 21, 2011
I have an Excel sheet with data organized like:
1 A
1 B
2 A
2 B
2 C
I want to reduce the first column to unique records, and have the second column listed on the same row. (I'm assuming I'll need Access to do it.) Is there a way to produce a table like this?
1 A B
2 A B C
The final result would need to be something I could put back into Excel.
View 3 Replies
View Related
Nov 11, 2013
i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
View 14 Replies
View Related
Feb 23, 2006
Hi guys ,
I'm very new to Access , but I need to do this and I can't figure it out. I have a form that looks like this :
http://img64.imageshack.us/img64/5566/formemail4qz.jpg (http://imageshack.us)
I'm trying to add up all the emails in a single string , but I can't access the records one after the other. The best I can do is display the currently selected record's adress ( The one with the black arrow in front ) . I tried browsing through the Fieldname.Value propertie ( in this case Me.Courriel.Value ) . I though I could cycle through all the Controls in the form , but Me.Controls.Count returns 3 , so I figured all the records must've been embedded into one control. Can anyone help me :( ?
(Sorry if this is a documented question , I've tried searching but couldn't find anything )
View 3 Replies
View Related
Oct 11, 2013
I am designing a bead ornament database for my mom to track inventory of beads, inventory of finished ornaments and cost/pricing. I have a table that joins the Item and bead part with the quantity of each bead part needed, it has the following fields: ItemMatlID, ItemID, BeadPartID, QtySo I have multiple rows of ItemIDs for all the BeadPartID & Qtys.Now I need a query with 1 line per Item and all BeadParts and their quantities. However, I need the BeadPart to be a row data and not a column heading. So a crosstab is out, I believe since it wants to make the BeadPart the column heading and not data in the query.
View 7 Replies
View Related
Aug 29, 2014
I am trying to merge data from multiple rows into one row for each unique ID. I can replicate on how to do this on a table, maybe a query or something like that. Attached img shows
View 3 Replies
View Related
Apr 7, 2015
I am trying to change the data in my rows to columns...I have data as per the attached picture in columns B-I...I would like the rows to be pasted to columns as per columns M-Q...so row 1 ends up as the first lost of data in M-Q and row 2 ends up as the second lot of data.There are numerous rows in my actual file.
View 6 Replies
View Related
Oct 1, 2013
Background I have a query (Q1) that retrives data from a table (Table 1). One of the fields in Table (F1) contains both text and numeric data (ie: 24 eggs). I want to separate these values in Q1.
Questions
How can i in Q1 retrive only numeric data from F1 and display that data i a field?
How can i in Q1 retrive only text from F1 and display that data i a field?
View 3 Replies
View Related
Sep 28, 2014
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
View 7 Replies
View Related
Dec 19, 2005
Hey folks.
I have an Access db needing populated via a worksheet with unknown # rows and known # of columns. Before pulling this data in I must do a row count to determine how many records will be added to the db. Otherwise, it would be a very simple thing to just copy the contents of the worksheet over.
Known:
- Only using DAO.
- The access table is already created matching the column count in the worksheet.
- The spreadsheet will have an unknown row count.
- Some rows in the spreadsheet will have various cells empty.
- A completely empty row will mean EOF.
Need:
- I need to determine how many rows are in the spreadsheet before copying into db.
Problem that occurs from attempt:
- Overflow issue. I seem to be counting every single row on the worksheet, even though only 2 contain data.
Any ideas out there? Pasting below my latest attempt.
Dim strStorage as integer
strStorage = CLng(xlsWST.Rows.Count)
Thanks folks.
-Tethys
View 4 Replies
View Related