Is there a way to use a command button to display the database window. I changed the Startup to not show the database window and want to be able to show it using a command button. I would appreciate any help.
I created a command button from using the wizard so when I click to delete the record the button is for, a window pops up asking if I am sure I want to delete the record. Is there a way to not have the button pop up?
Here is the code:
Private Sub cmdCompleted_Click() On Error GoTo Err_cmdCompleted_Click DoCmd.RunCommand acCmdSelectRecord DoCmd.RunCommand acCmdDeleteRecord
I have a database that uses a switchboard with a close button that runs several instructions before it exits. The problem is that some users have access to the database window and I need to prevent them from closing the database by hitting the X in the upper right.
Is it possible to create a command button on an Access switchboard that will automatically backup a database? What code would I need? The command button wizard doesn't handle this task.
Hello all you experts and thanks in advance for your help.
I want to issue a message box after a window (a form) is displayed. I have attached it (in VBA code) to the onOpen event but the message displays before the window is displayed. So I tried, OnCurrent, then onLoad, but in each case the event triggers the message box before the window is displayed.
Is there an event which triggers AFTER the display of the window. Note that I don't want the message box displayed several times so onGotFocus is out.
frmPayments (Bound to tblPayments) - Main Form for payment entry. frmInvoice Sub (Bound to tblInvoice) - Sub form to display not paid invoices.
What i need is a Command button , lets named it "Commit", to perform a few tasks :
1. When click, prompt message asking whether to Save current payment record when all relevant input is completed during data entry.
2. If Answer is "Yes", then it will compare the "Invoice No" on the Main Form with the "Invoice No" of the Sub
Form , and if found to match, then put a tick in the "Yes/No" field of Invoice Table (tblInvoice) against the matching "Invoice No" of Main Form. This is to record payments made to this particular Invoice in Invoice Table.
3. Proceed to save current record, Refresh Main Form to be ready for a new data entry.
4.If Answer is "No", discard all current entries in the Main Form, Refresh to be ready for a new data entry.
I have created a database for a church cemetery. It contains the usual names, birthrates deaths, etc.... I have also created a map of the cemetery in PDF format with the lot number highlighted which is assigned to a particular record. I did the same in excel with a layout of the lot and a JPEG picture of the grave marker. In my table I created Three columns - Site Plan, Lot Plan, and Grave marker. I insert the specific site plan, lot plan, and jpeg picture using the "insert object" in the table. On my form after a search, I have created three buttons.. Site Plan, Lot Plan & Grave Marker.
I have looked and experimented trying to assign these command buttons to open these files on the form. I don't have any experience with macros or VB code.
I've created a mdb that i'm trying to run from a command window. When I type "vemacro.mdb" at the command prompt the mdb runs fine. But - after it runs I get a popup error window that says "cannot find the file "f:vevemacro.mdb" (or one of its compenents)." But - it DID find it and ran it just fine.
I'm running ms access 2003 and windows 2000.
Can anyone tell me what is causing this to happen??
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Access 2013 People,where the command buttons are not displaying properly?Notice the words and images are nice and centered in the buttons. The buttons are all the same size.Now look at the same DB in Access 2013:
See how the buttons look bloated and the images and wording are not centered anymore. And working on it in design view is a nightmare! When you try to move the command button part of it is left behind every time to try to move it.You can turn the themes property to "Off" but I like the themes.
Hi, I have got a small problem and maybe someone could advise me. I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click() Me!itemquery.Requery End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single) Me.Labelsearch.SpecialEffect = 2 Me.Labelsearch.BackColor = 255 Me.Labelsearch.ForeColor = 10092543 Me.Labelsearch.FontItalic = True Me.Labelsearch.FontBold = True End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single) Me.Labelsearch.ForeColor = 255 Me.Labelsearch.FontItalic = False Me.Labelsearch.FontBold = True End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single) 'Come back to initial state when button release' Me.Labelsearch.SpecialEffect = 1 Me.Labelsearch.BackColor = 16373685 Me.Labelsearch.ForeColor = 8388608 Me.Labelsearch.FontItalic = False Me.Labelsearch.FontBold = True End
If I create a command button with the wizard and assign the code : me!itemquery.Requeryto the on_click event my form is working fine. Why is his code is not working if I assign it to a label? :o
I generated a pop up warning message window every time when I open a form. The problem is there are many lines information in the window. Now I want to have a Print button in the msgbox window. So the user can click that buttton to print these warning message. Is this easy to do? Any clues? Thanks.
I am using Access 2010 and creating a front-end for a customer database.
Take a look at the screen capture I added to this post.
What I want to happen is on that "Supplier" button. When I click on it, it opens a new window with the "Supplier" form and on the specific supplier for this product. There is an attached image of what that macro looks like.
The problem I am having is that I do not want the Supplier form to open in a new window, I want it to open within the Navigation Form, replacing the what is currently on the screen.
Hello everybody, it's been a while since i wrote on the forums and yet again I am in the need to ask for the help of this wonderful community. I have a form on which is a button that I want when pressed to open a Windows Explorer window displaying the contents of a directory. The exact way that I want this thing to work is like this : The user is browsing a form of lets say client details and on the form lies the button that when pressed will take the client's name and apply it to the path in order to open that Windows Explorer window and create a path like C:program filesclient name and display the contents of that window. I would like if possible someone who can point me as to how I can construct this button to work cause I cant see to get it done. Many thanks for your time :)
I would like to have a button on my form that would update a record to a closed status, but I want to have an "Are You Sure?" window pop up first. I did a search on "verify," "verification," "sure," and several others but haven't found what I need. I looked through my Access bible, with no luck.
I would like to be able to have a button that my firm's legal assistants can click which will automatically popup the folder on the server where the client's documents are stored. What is the easiest way to write this?
Code: Private Sub Form_Load() lblSalary.Caption = "Enter Salary" txtSalary.Value = "5000.00" cmdIncrease.Caption = "Increase Salary" End Sub
The problem I am having is that I dont understand why the cmdIncrease button does not display "Increase Salary" when the form loads. The button is there but it is blank. The lblSalary button displays "Enter Salary" with no issues.... and I do not have "Enter Salary" in the caption property window... only in the coding window but it still works.
ive been disabling the database window from the startup tab in MS access, just now when ive tryed to show it on startup it appears but its stuck in the top left hand corner and i cant move it! so i cant access the tables
I've imported somebody's access db which hides the database window by default. When I click the db window button in the toolbar, the db window pops up high up and is somewhat hidden by the toolbar. I can't pull it back down as the top is hidden and when I try to move the toolbar,the db window simple moves up so I can't grab it and move it. Any suggestions?
This may seem silly and I've seen no mention of it in this forum yet but the "Database Window" from previous versions of Access is now called the "Object Browser"? I had code to hide the database window on startup but can't seem to find a way to hide the object browser on startup. Any ideas? Also, is there another way to view my objects in ACC07 because this way is slowing me down tremendously! It's much more difficult to find the objects I'm trying to work on and visually see where I left off. Any help would greatly be appreciated! Thanks in advance.
Dear Friends I made my a stupid mistake and I don't know how to rectify it.
There is a inventory software built in access xp. In order to protect database I've cleared all the options from that is
a) Display Startup form b) Display status bar c) Allow Full menus(Changed with Custome Menu) d) Allow Default shortcut keys e) and foolish thing cleared Use special key also
I've given a task to modify program where I may have to add New form. I don't know how to unhide database window. pls suggest me what to do....
I have a weird problem with one of my databases. Out of a sudden, when I wanted to open that database the databse window did not show up anymore. With this I can not access my forms, tables etc. any longer. However, when I click on View->Databaseobjects and choose e.g Forms than I can click on the code icon and I can access my code as well as the corresponing form in the design view. I can not access the tables but when I click on the "show fields" in the design view the list of fileds is showing for the corresponding form.
I tried that database on 3 different PC's with the same effect.
Does anybody have an idea what could have caused that the database window is not showing anymore and/or how could I bring that window back.