i have two tables, tblgroups and tblrecipes
on a frmReview i am displaying the groups in a list box so that user selects a group and sees relevant recipes ( which i am displaying in a subform after quering from lstgroups).
Default value for lstgroups is "[lstGroups].[ItemData](0)" so that it always displays first goup recipes... (otherwise subform dont displays anything when i first open the frmReview)
is it possible (which i am sure it is) that when i first open frmreview, the subform displays all recipes in all groups (whole database), so that when i select one group in lstgroups then it run query and filters the desired recipes. May be we can put "all" in lstgroups as first item so that i can use the default value..
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform 'Application.TempVars.Add "varcountryselect", "*" SELECT in the listbox "lstlocationsperproject" SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0) Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
I'm using access 2003 sp2 with all the current updates. I've got several tables linked to a sql server 2000 DB. We use it for an app called Altiris. Most of the queries i've written from these various tables work fine. However, a couple of them for no apparent reason, do not display the correct data in the data sheet view when the query is ran.
for example, I have a simple query with two tables linked. The first field is asking for the "name" column of one of the tables. In the criteria of that column, I put something in to limit the names of the programs i'm looking for. Lets say I use LIKE '%adobe acrobat 7.0%' When I run the query, it returns a certain number of records, but in the name column, it has all wrong info. I just ran it and it came up with 4 records: "webcast....", "abacast client", "Ibm websphere", and something else. Nothing even close to "adobe...."
So then I export the query to an excel spreadsheet and then open. Guess what? It has the correct info. Four records of adobe acrobat. The other column I have is from the other table and is just listing pc names. They displayed properly in both datasheet and excel file.
does anyone have any ideas what could cause this? I've deleted the table and linked to it several times. I've used this table for many other queries and it works most of the time. I just have no idea what is causing it to do this for only a few queries.
We are using a data sheet view to display the content of a table of colors, we would like one of the columns to display a colour chip of the RGB value it contains,
I am using a list to display a query. The query has a few fields and one of these fields retreives its values using a look up. The problem is that, when I run it, the value of the look up field displays numbers instead of text.
Any help to fix this problem will be very much appreciated. B
Help !! - Can anyone help. I have had a quick look through the previous threads and can't seem to find anything that may help me. Has anyone got any ideas.
I have a table which has many columns, one of these columns is called actions. On the design of the table, the action column is a Text Datatype and on the lookup tab the row source is a typed in list of actions.
A form has been created from this one table. A drop down box has been created which looks at the action column and so drops down to give us our typed in list of actions.
Users will select the current action from the drop down list.
What I actually want to do is depending on what the current selected action is, that the drop down box only shows a subset / filtered list of actions.
I know how this is designed is not the tidiest/slickest way of doing things, But unfortunately, I have inherited this from someone else who has been running the database this way for over 6 years !!
I have several combo boxes and textboxes showing quanity,productname, size, and price. How can I pass all of this info in a single row that also calculates the quanity and price. Also, multiple selections can be added, so several items can can added in other rows. THe ability to cancel each row would be required as well. Thanks
I created a multivalue list in my table. It contains a list of names and a checkbox. I designed the form based on this and am able to check off multiple names. When I go back to look at the table, it stores in each name separated by a comma. So far so good.
When I create a report to display the data, it displays it as 1,2,3..etc., instead of the names separated by a comma.
I am using MS ListView SP2. While designing the application, I did it in my local drive. Since it is multi-user application, I have put it in a shared folder. The issue that it gives an error that there was an error loading ActiveX control on your form.
Has it to do with reference? Do I have to give reference in all the machines ?
Hi I have placed a ListView on the form. I have written a DblClick event for the ListView. The application is a multi-user one. The issue is that the DblClick event was working for few days and now it does not work for any of them but it is working only in my system.
Is it related to reference ? I developed the tool on my system and placed in a shared folder from which everybody uses. Do I need to give reference in all the system ? Please help. I am stuck with this problem.
I dont know if this is possible but I want to change a yes/no field from a list box.
I can load data in fine I can even loop through it to see what value each item is but, is it possible to allow a user to change a value from a list box?
I have a form (frmHourEnter) with a combo box (Staff_ID) that lists staff members from a table (tblStaff). The table form (frmStaff) has a checkbox (ckEmploy) which indicates if a staff member is still employed. If the checkbox is checked how do I exclude that staff member from the combo box Staff_ID in the form frmHourEnter?
I have got problem with ms access report. I want to make a report which is based on
1) first master table 2) first slave table 3) second slave table
I have done some research and decided to do some form with subform. So I have got the view one record from master table and many record from slave tables in one view.
But it turned out that it has become duplicate records. (the relationship are ok - it duplicate master record as many as slave records)
So: 1) how i can do ms access report from multiple tables - one master record with multiple records form slaves tables
I have created a form with a list view (active-x) to be able to control colors, etc in a list.
When I open my form, it is already information (three rows) in the list view. This despite the fact that I have shut down the access application and even shifted the database to another computer.
I can of course delete the elements with ListItems.Clear when I open the form, but I'd rather like that they did not show up at all.
Where these "default-elements" are stored, so I can remove them from the list view once and for all?
I have some issue when i save list view data in a access table.In form I have a list box(listtotalcount) and one text box(ID). In form load event I run a query on that list box like: "SELECT count(id) FROM table A" and it gave me the correct result. Now I want to store this data on a different table (table b) and I use this code:
Dim db As DAO.Database Dim rst As DAO.Recordset Set db = CurrentDb Set rst = db.OpenRecordset("table b", dbOpenDynaset)
[code]....
But the problem is when I click the save button it store only id not the list box value.
I have a form with a subform that has started a strange behavior... Periodically (no apparent pattern) whenever I leave the form (go to next record, print report, send an email...) the field list (Add Existing Field) box pops up. I always thought that those boxes (property sheet included) displayed or were hidden based on the state the last time it was used in Design View. I have confirmed that all forms and subforms do not have the boxes in display state in Design View.
I can go into Design View, close the box and all is well for awhile. It seems to happen more frequently when I go to print a report based on the data on the current form. My question is - what causes the Field List or Property Sheet to toggle on/off and can I suppress it either on a form or in the VBA code?
I have a problem. In form view, if you use the mouse wheel to scroll down, you switch to the next record. Is there a way I can disable this? Even if I switch the RecordSelectors and NavigationButtons properties in the Form Selector to "No", it still goes to the next record as soon as you scroll down with the mouse wheel. I want the Form to scroll down if you use the mouse wheel, not go to the next record as it does now.
Please help. I don't know what to do. Thank you in advance. kruger101
Err_DblClick_Click: MsgBox Err.Description Resume Exit_DblClick_Click End Sub
When I doubleclick on certain records on the subform it will open the form TRIP NV diplaying me the linked record, on other records it will open the form TRIP NV but a blank form with no records displayed! Why is this happening? Marco
Hi, I am a complete newbie to Access. I want to be able to double click on the field in the table, form or a query and have, as a result, another form pop-up with all the data from that record displayed. I have tried macros, but the doubleclick property only has things like goto first, last, etc. records. and always brings the first record in the table. Any hep in the right direction is greatly appreciated. Thanks.
I have a query which selects certain record. I then use a form to display these records in a tabular format. For each record I would like to dispaly a running total (accumulative). Example
If I have five record with field say Amount and values are 10,20,25,30 and 50
On the first line I would like the TOTAL =10 next line TOTAL=10+20=30 next line TOTAL=30+25=55 and so on.
Can anyone help with this? Your help will be appreciated
I got a form name "X-Zone Cyber Cafe by ITE College East" Inside that form, i got a subform called "PCStatus"
In the main form, i got a image called 'pc01'. I wan to do it something like, when i click the image(pc01), the record of 'pc01' from the PCStatus table will be displayed in the subform.
And when i click on image(pc02), the record of 'pc02' will be display in subform