I'm trying to get my query to display only the minimum value within my query results. I have the following fields, CustomerID, OrderID, ProductID, WarehouseID, Freight Cost.
My current query will return results that show me the locations and freight cost of each product to my customers. My intention is for the query to only return records that has the lowest freight cost as there may be several warehouses with identical products but with varying freight costs due to location to customer.
I've tried to apply the MIN function on Freight Cost but it will only sort the records in ascending order instead of only displaying the record with lowest frieght cost.
I have six textboxes in my form. First 5 textboxes have dates ( MMDDYYYYY). In the sixth textbox I need to display the minimum date among these five dates.
I have a counter on my form which will increase or decrease depending on weather a number of tick boxes report true or false. Is it possible to set a minimum aloud value on a box regardless of other criteria. At present I can depending on certail criteria, finish up with a - number which for other reasons, I dont want.
hi all, I've got one question regarding dates. I've already make the form to show the count of records by using query according to the start and end date selected by the user. What I want is when I open the form, it should show the results of count between the minimum and maximum dates inside the data table. It means I want to show the count result without date specification that is the total count from all records of the whole table .
Can anyone help me how can I make it? thanks a lot in advance.
Im trying to create a database for a stock control system. I have a slight problem, the stock is in two places. So what i have to do is put in the values of stock in each place and then display the value of those two added up in the table. What is the best way to be able to do this?
As part of the report I'd like to have a table that would list all different values in column in column A and the number of times they appear in the table in column B.I have a bit of a hard time how to populate the table the easiest way.I have all the values in a separate source table, so first column is easier. but do i have to write the dcount statement for each row for second column?Could I display results of query as subquery in report.If you have a bunch of textboxes with increasing names like NameBox1... for for/next loops in reports... is there an easy way to assign those names?
I have a field in a form which displays the Sum of 10 values from other textboxes. I want to display the values of that calaculated field in a report and somehow I am stuck. I am running the report based on a query. How would I get those field calculation values to display in a report?
Hi. I am using Expression Builder to total 3 columns for a query.
Total: [BaseTotal]+[ClickTotal]+[Adj Total]
The [Adj Total] is sometimes empty, and when this happens, Total is empty even though there are values for [BaseTotal] & [ClickTotal]. How can I make the Total show up regardless of whether any of the three items used to calculate it are Null?
I have a form that functions as information display/update for a table. It also needs to display a list of relevant codes from another table. The codes in the second table have an ID that will match an ID field on the main table. However when I do this I either get every code in the code table, or nothing.
Here is the SQL that I'm trying to use:
SELECT table_code_lookup.code_text, table_codes.code_extra, table_codes.alum_id, table_codes.ID FROM (table_code_lookup INNER JOIN table_codes ON table_code_lookup.code_id=table_codes.code_num) INNER JOIN table_alumni ON table_codes.alum_id=table_alumni.ID WHERE (((table_codes.alum_id)=me.id));
However anything I can think of putting for me.id doesn't work. I've written a sub that will modify the query and insert the correct ID num, but I can't figure out how to get it to run when I change records with the record selector.
I have the nagging feeling that I'm missing something totally simple, but can't figure out what it is, where am I going wrong?
I am designing a book collection database where each book can contain multiple authors. I used three tables; tblBooks, tblAuthors, tblBookAuthorJOIN. The tblBookAuthorJOIN allows me to create a subform with drop down combo boxes in the Books form linking multiple authors to each books indexed field. The Author table contains the usual FirstName, LastName, MiddleName fields. I would to be able to display the names of each author in the forms header but I am having difficulty.
For example a book may have two authors such as:
Authors table would contain values such as
Last Name: Grisham First Name: John
Last Name: Twain First Name: Mark
Textbox in header would display: John Grisham; Mark Twain
The authors would be displayed in the following format in the same order as listed in the subform datasheet.
I have a multiple column combo box on my form, that is correctly populating. When I make a selection, it displays the result from the first column. Bound column seems correct, as my table is being populated correctly.
1 - Can I display the values from both columns after the selection has been made?
2 - If not, can I choose to display the second column (not the first) after the user has made a selection?
I work at a program where we have individuals try out for a field (coming from various backgrounds). The program has been in place since 2012, and I wanted to start looking at the data for analysis and comparing trends, etc; I imported our master file (excel) into Access. It's in one big table, column headings include roster number, name, gender, type, FY (fiscal year), and finalcode (Select, Non-Select - but put it in as 1 or 2 in the field)).
I created a query, and was able to get data I was looking for.I then set it to Pivot Chart (bar graph).
Bottom (Believe its X) Axis: I have Type, Year. Right Side of Chart (TypeCodeNumber) Top of Chart: Count of CodeNumber
It gives me the totals (whether select or non-select) just fine, but I have been racking my brains, watched tons of YouTube videos and read a lot on how to make it give me a percent. I found a way to go Percent on the left side of the bar chart, but the Values go up to say 3300%. I know the problem is with the Count up top.
I have an issue with a couple of my combo boxes. When in form mode the drop down menu displays a list of options (taken from my source table), this is fine, but the problem is that it allows the user to select more than one of the options in the form of checkboxes. This is not what I intended.
I've attached to pictures to demonstrate the problem. The first is ComboBoxQuery (the one with the problem) and the second is ComboBoxQueryWorkign (the one without a problem).
I'm not sure why this is happening and I've tried comparing all the properties of both these combo boxes and changing some of them to see if I can eliminate the problem without any joy.
I use a very standard SELECT statement to pull the data for the combo box:
SELECT CountryID, CountryName FROM tblCountryInfo ORDER By CountryName
I have 500 Records in my Software Table, and I would like to display only those records that match my criteria that I place in my text box on my form called Software Name. So Once I have entered the software type in my text box, then I would like to display those records at the bottom of the screen as the selected records.... Any ideas??My table is called, Software, which contains Software Type, Software Name, Serial Id, Comments, Inventory Number, Version , Key and Company... I have a text box that is called txtSoftware, Which searches the databse and display the information in a list box called, lstResult, I would like to however, have the option, display in the list box but also display those records on the bottom of my form as it will look like in design view of my table. I have no idea how to ever start the idea ....
This is probably a very basic question, but I'm going to ask it anyway.
I have two tables linked together, in a one to many relationship (a supervisor table, and an employee table). Each supervisor can have many employees that report to them. I then set up a forum to enter new employees as they come into the corporation, and need to referance which supervisor they report to, I have a drop down box that I want to display SupervisorLastName, SupervisorFirstName (for example, Williams, George) but is only displaying the SupervisorID (for example 60).
How can I make the forum display Williams, George instead of 60?
I am attempting to run a query with fields from 6 tables. These tables have been related, but just a simple ID to ID throughout all of the tables. When I select the fields I would like to be in query using the disign wizard it will allow me to create the query, however it will not display and data.
Originally, the query wizard would not allow me to insert all of the different tables fields in the query because "they were not related", so I went back and did the ID to ID relationships. Like I said this now allows me to create the query, but unfortunately no data appears.
Hi all, this is my first post here and im hoping one of you can help me! :).
Basically I have a report which pulls up a number of fields from different tables that basically show a work number and what the value of the materials used in the job cost. It works fine. Now when I go to add the labour table into the query, it instantly cuts out alot of the records. Now im 'assuming' this is due to the fact that not every job could have labour spent on it, that it is simply not showing records that do not have any labour hours associated with it. Therefore I want to be able to call up all the information as I did previously, but be able to show the hours spent on a job (if any). This is not my database and Ive spent a good day or so staring at it and trying multiple things but I cant seem to pull up the information correctly. There is a relationship between the tables, but I am puzzled why the information it pulls up when I add the labour table is so different.
I have a continuous form (frmEmployeeVis) that displays the records in the form's Record Source (SELECT (whatever) FROM dbo_EmployeeData). One of these fields, NotActive, can be edited for each record and affects how that record displays elsewhere in my DB.
I have a query (qCurrentHC) that counts all of the records in dbo_Employee data where NotActive equals False (SELECT Count(*) FROM dbo_Employee Data WHERE (dbo_EmployeeData.NotActive="False")
Right now, I have a List Box that displays the result of the qCurrentHC query, where the row source simply selects the only value
It all works fine. The records display, the query runs, and the list box displays the number. However, if I change any of the NotActive values and hit update (Me.Requery on the frmEmployeeVis), the qCurrentHC query obviously doesn't update since it isn't the form's record source. If I open any of my other forms with qCurrentHC displayed in this manner, or reopen this form it will update since it'll rerun the query then.
How do I get the query to rerun when I update this field on that form?
This is not a very big issue, but a very annoying one. I'm making a weekly display of tasks preformed (One subform for each day). The functionality is almost like a timesheet. You register the hours worked on spesific tasks/projects.
The problem I got now is that the textbox containing the date (In the subform) is not displayed when there is no records in the subform. The date is set by the motherform - Me.Form!frmday1.Form.VarDate = Me.day1
I'm a little stuck on three of my nine queries. Bascially, three of them display records for a given day, three for a given week and three for a given month. The criteria for days and months was pretty easy; I just got:
[Enter Date] for a single date DatePart("m", [Date]) = [Month] for a given month
However, I'm really stumped on how to work out the criteria needed for working out records for a given week. All I managed to work out was:
<=[Week Ending] And >"Date[Week Ending]-7"
This works when there is no test data, but not when there is. I know it's something to do with the -7 bit, but I can't work out what.
At the moment I have a field 'Author' which is displayed using a subform. The user can cycle through the many authors that are associated with each record in the main form. However, what I'd like to do is to display each record simultaneously in the same control, and with a little bit of playing around in VB get the form to work out how many Authors there are and display the names in a particular format. I.e.,
Bloggs, Jones & Smith Hank & Mason
See what I mean? Does anyone know how I might refernce the records. So logically it would be:
