I have a access table with 32 columns and 42,000 rows of numbers. I need to find the MIN number in the row and if the MIN number has duplicates then I need them all placed into another column by column name. Example: Starting file DEST,ORIGIN1,ORIGIN2,ORIGIN3,ORIGIN4, ETC 05512,3,2,4,2
I have been working on a query in my database and I would like to look up a Number Value from another table based on a Number ID field and the Number Date in the Number Values table, where the Number ID field in the table agrees to the Number ID Index field in the query, and the Number Date field in the table agrees with the Initial Date field in the query. The Dlookup syntax I currently have is as follows:
The Dlookup shown above does not return an error, but it returns a blank field. I know that individually, the Dlookup for the Number ID works, but when I add the And for the Number Date the Dlookup returns a blank. Also, I have verified that there are existing records where the Number Date and Initial Date fields agree.
Also, I changed the format of the date fields in the tables to be ShortDate, thinking that the Timestamp was causing the Dlookup to not find a match. I also tried to use the DateValue() function within a query to reformat with not luck.
Part of my access application does invoicing. I have an invoice number table that wholes one field "InvoiceNum". On my invoice report i have the following code:
Code: Private Sub Report_Open(Cancel As Integer) '// lookup invoice number when invoice opens intInvoiceNum = Nz(DLookup("InvoiceNum", "tblInvoiceNum"), 0) End Sub
[Code] .....
Problem: My report open with groupby ClientID and ProjectNum. Multiple invoices print on the same report. If any invoice spills over to second page the Format Code runs again inserting an incremental invoice number to the second page. How can i prevent this from happening?
I am trying to check for when a user trys to enter a duplicate number.
The control that I am checking is in a subform on the main form:
Main: frmCandidateInfo Sub: frmTestInfo
Control on the subform is: RankOrder
I am trying to check the control entry against the table entry:
Table: tblTestEvents Field: RankOrder
Here is what I have:
Code: Private Sub RankOrder_BeforeUpdate(Cancel As Integer) Dim lngRankDup As Long lngRankDup = Nz(DLookup("[RankOrder]", "tblTestEvents", "[RankOrder]=" & Forms!frmCandidateInfo!sfTestInfo!Form!RankOrder, 0)) If lngRankDup <> 0 Then MsgBox TestEventID & " already exists in the database" End If End Sub
I know that the error is due to the argument not being correct, but I am not sure how to fix it.
...the other textbox ties to an update query, which updates the sequence number with the new value supplied by the user. Simple.
Then about a week ago it stopped running the dlookup part - nothing shows in the text box that is to show the current sequence num.
Oddly, if I enter a value in the update text box and press the button to update the sequence number (which still works) -- the previously dormant dlookup textbox now shows the new value - so it works ...it just doesn't want to work on this one workstation unless the update query is run first.
What can this be? The update button merely calls a DoCmd.RunSQL with both an insert (storing old value locally in ms access table) and an update (updating the sql server table's seq number using an ODBC DSN and sql server driver).
It's almost like the dlookup falls asleep now and won't wake up until the update is run...
I am trying to make a DLookup function to return the ID number of an entry that matches 2 or 3 criteria but I am struggling to get the syntax correct for the second and third criteria.
Here is what I have so far:
1 criteria, works fine =DLookUp("[timedata]![id]","timedata", "[processdone] =" & Forms![Mainform]![p11] )
2 criteria, works fine =DLookUp("[timedata]![id]","timedata", "[processdone] = " & Forms![Mainform]![p11] & " And [timedata]![BGSnum] = 1001" )
BGSnum is a numerical value but it changes for each form I load, so what I want to do is use the form location value as the criteria.
I am creating a form for users to enter data. Each entry needs to have a "Event ID" associated with it and these Event IDs may be used more than once but will refer to the same Event (if it was a single entry with no duplicates, I would just use the rows primary key). How to create a query that looks at a list of existing numbers (Events already in the table) and returns the next/an unused number? I would like to create a button that says "Next available Event ID" and provides the user with a number.
DLookup function. (this is for a stamp collection database).
On my form ("InventoryInput") I have a text box called "Catalog" for a numeric entry and a text combo box for selecting a "Country" in drop down list.
I want to query a table called "CatNameList" to get the "StampName" of the item (based on the entries of Catalog and Country) and populate that name in the text box. The fields in this table are called "StampName", "CatNumb" & "CName" respectively.
I have successfully placed the following expression in the control source of that textbox and able to populate the StampName I need based solely on the catalog number alone.
That express is : =DLookUp("StampName", "CatNameList", "CatNumb = Form![Catalog]")
So it will populate the "StampName" data to match the "Catalog" number entry just fine.
However, I need to add a second layer to incorporate the Country.
Example : There is a catalog "1" for "USA", and a catalog "1" for "Canada" but both have different "StampName".
I have been attempting to get that second piece added with no success. Here is the expression I have been trying to get to work :
Right now, the text box is just blank with the above expression. I thought it may be because there was no match found, but I have triple checked to ensure I have the spelling correct on the country name in both places.
Basically, I just need the dlookup to take the "catalog" and "country" off the form and match it to the "CatNameList" table fields of "CatNumb" and "CName" to give me "StampName" field back on the form.
Having problems getting dlookup to work in the control source field of a text box.
My form has fields : Catalog # (numeric value) and Country (drop down text selection).
I would like to query a table CatNameList for a name (text) if the catalog # and country find a match on the table. My field names on the CatNameList table are : Name, Number (to validate against the Catalog # entered on the form) and CName (to validate against the Country drop down on the form).
I am successfully able to populate the name from the CatNameList table on my form using lookup of the catalog # using this :
However, I will eventually have several catalog numbers that will be identical in the table CatNameList, thus why the country is important as the second criteria to be added into the dlookup.
I have tried for a few hours unsuccessfully to add the second portion to my dlookup.
This is what I have currently (not working) that I have been playing with, I'm sure I'm missing a quote mark, & or something simple.
Hello, I am trying to generate some query result on a form. My DB consists of the following fields : tradeID and profit/loss. How do i make a query to find the Maximum consecutive number of wins and losses in the database and display the results on a form?
Would really appreciate it if any of you have tried to sort and display results for finding consecutive number of events in any database!
I should find the position of a number in a sentence and later extracted. The number is attached always to an "E". ie: E1, E2, E3,E4. The range of the number is 1-4. I have this until now:
I am looking to find if a field contains a number and then build a case statement depending on which number is found. The field will contain data just like this:
Quote:
Repaired frequency response and grounding issues. Replaced 2 Hybrids, capacitors, and connectors. Tested MER/BER and operation to specs.
Here is my code that did not work:
Code: If Me.txt_work_comm1 Like "*Hybrid" Then 'Sets up auto priced based on number of hybrids entered '1 hybrid If Me.txt_work_comm1 Like "*1" Then strCriteria = "repair_item = 'Charter RF Amplifier Repair + 1 Hybrid' AND profile_types = 'Alpha'"
[Code]....
To Summarize: 1. I need to find if the word "Hybrid" or "Hybrids" is in the field 2. Then I need to know how many to determine a price
I have been working on a simple data base for some time now (beginner level) and am still trying to improve it. I would like to do something but before that I would like to have your opinion to know if it is even possible?I have a query QryMainReport:
Start Date/Time End Date/Time Employee
At the moment this is what the format of my report looks like (I removed other unnecessary fields):
StartTime----------EndTime---------------Employee 12/06/2014 01:00--12/06/2014 03:00------John Smith 12/06/2014 04:00--12/06/2014 06:00------Jane Doe 13/06/2014 02:00--13/06/2014 05:00------John Smith 13/06/2014 08:00--13/06/2014 08:00------Jane Doe
I would like to do as a report. (Dates would always be from Sunday to Saturday). I am not sure it is possible to do that. I suppose first it would mean:I would have to do a query to separate the times from the dates?I would have to find a way for Access to find the unique dates and unique names?Does it mean I have to use cross tab queries?
A customer's name is SZEE. Seek him through the SName textbox with Find, and Access can't find him. (Same in the table.) Seek him with a wildcard Sz* and there he is.
I've tried it on another machine - also with Access2k - and it's the same.
Is it an Access quirk? Is there an answer? (The client asks why. Be good to be able to say.) Cheers.
I have an Access2007/SQL Server 2012 system with 20 users for an insurance company. The company does most of its business via a network of vehicle dealers around the country. If someone comes in to buy a motorcycle, boat, or recreational vehicle at a dealership they need insurance to take it home, and our dealers send the quotes to us.
The dealers, in turn, receive payment from us each month for their efforts. Some are paid a % commission on the premium, some are paid for each quote they send regardless of whether the policy actually sells or not, and some are paid a set amount per sold policy. (Yes, that is relevant information!)
We already have reports that tally the amounts due each dealer based on their payment scheme, but last month our bookkeeper had to write about 650 checks manually because the check writing is not automated. She'd look at the report, and then enter name, address, and amount (in digits and words) into Quick Books and print the checks from there, a horribly tedious process. I've been asked to print the checks from Access. Basically one click would print all 650 checks.
I've opted to use a Make Table query to move the commissioned dealers amounts to a single location, and then to run two append queries to add the records from those paid per quote and those paid per policy. At the end of the day, one table contains all the information necessary to print the checks...except one.
The check number.
I need a way to sequentially number each record in the new table with a user generated starting point, the first check number.
By the way, the check blanks are on standard letter sized paper, three to a page, with tear-off perforations to separate them, in case that information has any relevance.
I think the best way to accomplish this is from the report itself. I've created a blank field on each record for the check number, and what seems most logical is that the sequential number is generated on print and written back to the table, rather than just generating all the numbers at once. That way, should print ever be interrupted, it will be easy to take up where we left off.
Date of Birth (DOB) field etc. in one program are text - how do I make another file with the same data into number fields for Date of Birth field etc? When I copy data to file that has number fields the 09252004 is changed to 9252004. Can I get reports with the correct Date of Birth in them by moving data from text file to number file?
There is data entered monthly in file and formula has been set up for January, February etc as ---quarter: Int(([month]-1)/3)+1. I would like formula for the fiscal year for April to be counted as month 1, May - month 2, June as month 3, July as month 4, August as month 5, Sept as month 6, October as month 7, Nov as month 8, Dec as month 9, Jan as month 10, Feb as month 11 and March as month 12.
I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate() Dim medlemskod medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod") Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000") End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate() If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1) DoCmd.RunCommand acCmdSaveRecord End If End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?