Dlookup To Verify Input

Feb 12, 2005

Hi,

I'm using the code below to check new product# input from a form called frmProducts that is bound to a table called tblProducts.

Private Sub Prod__BeforeUpdate(Cancel As Integer)
Dim varX As Variant
varX = (DLookup([Prod#], "tblProducts", Forms!frmProducts.[Prod#]))
If Not IsNull(varX) Then
MsgBox [Prod#].Value & " already exists as a product #"
Me.Undo
Cancel = True
Else
'do nothing!
End If
End Sub


The problem is that any new product# that you input results in "product already exists".

Thank you very much, in advance, for any help.

Tony Scotti
Montreal

View Replies


ADVERTISEMENT

DLookup With Criteria = User Input From Like()?

Dec 5, 2007

I seem to have run into a snag. I'm pretty sure this would work otherwise:

DLookup(iif(Left( [GenericFieldname1], 4) = "C101","Offered","NOT OFFERED"),"Generic Query")

When I added this field/function to the query, I got #error values and when I clicked on one, I got an error that said:

The expression you entered as a query parameter produced this error:The object doesn't contain the automation object 'Please Enter Year'.'

I assume the problem is that I have the user filter the report by use of the Like() function for [Year] in the query when the report is accessed. How do I tell the DLookup function to search the column as filtered by the Like() function?

View 1 Replies View Related

How To Verify An Application

Oct 27, 2006

I'm looking for methods to verify if an application is working correclty.
Any suggestions?

Thank you in advance.

View 1 Replies View Related

Can Anyone Verify My Data Model

Jan 13, 2008

Hi I have designed a database for a small organization. It is a ver small database. can any one verify and tell me the mistakes in my design. It hardly takes 20 min for the people like you. This is my first step in designing. I am attaching the zip file which contains dbm file and business requirements. Complete physical data model is there.

especially in "category_tests" table i feel that i have done some thing wrong.

Thanking you all.

View 2 Replies View Related

Verify Date Validation Rule

May 12, 2006

I'm sure this is on the forum somewhere but have searched and searched... and had no luck.

I want my date feild to be set to enter a date no more than 2months in advance but a minium of a week in advance.

I have done this lol

week(1)<"">month(2)

I don;t actually have a clue, do you use "" to represent the value? also how do i do this date verify thing :P.

Thanks in advance

View 1 Replies View Related

Verify If Data Was Entered On Form

Oct 18, 2004

Hi all..

This is my first question posted on this site. I have created a survey with questions to be answered. The database is already populated with records of the people's names who were getting the survey. What I need is when the data entry clerk brings up the customer's name on the form, is that they are forced to enter the surveys answers for certain questions before they click the "Save" button. The answers are set up as radio buttons on the form (ie Less than 6 Months, 6 Months, 8 months and 1 Year).

Not sure if a Before or AfterUpdate macro is needed?

Any suggestions would be appreciated. Please email me directly if you have code.

Thank you

View 2 Replies View Related

VBA Code Problem To Verify Record

May 31, 2006

Hello,
I need some help. I have a form named MASTER based on a table also called MASTER.
A control of my form in names SSN which stores the client SSN.

On the same form I have placed a subform which has its record source to a table named 21.

What I am trying to do is:
When I enter a new record in my form MASTER, the code should:
1) Verify if in table 21 a record with that SSN already exists.
If YES, skip the code and do not add the SSN. If NO, well, run the appendquery.

2) At the same time, verify if a record with that SSN already exists in table MASTER. If NO, add the data, if YES, abort the code and exit the form.

The form EForms is a menu form I use to access the records.


This is the code. Something is not going right, I think with the end if functions. Any help? I have placed the code in the AfterUpdate event of my control SSN.

Dim mydb As DAO.Database, MyRs As DAO.Recordset
Dim strCode As String
Dim strFilter As String
Dim stDocName As String
Dim stLinkCriteria As String

Set mydb = CurrentDb
Set MyRs = mydb.OpenRecordset("master")

stDocName = "MASTER"

stLinkCriteria = "[SSN]=" & "'" & Me![SSN] & "'"



DoCmd.OpenForm stDocName, , , stLinkCriteria

If Not IsNull(DLookup("[SSN]", "21", "[SSN] = '" & Me!SSN & "'")) Then
Forms("EFORMS").Visible = False
Else
If IsNull(DLookup("[SSN]", "21", "[SSN] = '" & Me!SSN & "'")) Then
DoCmd.OpenQuery ("Appendssa21tax")
End If
End If

If Not IsNull(DLookup("[SSN]", "MASTER", "[SSN] = '" & Me!SSN & "'")) Then
MsgBox "Sorry! A record with this SSN is already in file. Retrive case from E-Forms Menu.", vbOKOnly, "Warning"
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
DoCmd.Close
End If
Forms!eforms.lstPreInterview.Value = Null
DoCmd.Close
DoCmd.OpenForm ("Eforms")
DoCmd.RunMacro ("CloseEforms")
DoCmd.OpenForm ("Eforms")
End If

Thanks.

View 1 Replies View Related

Queries :: Verify Data After Certain Entries

Jun 16, 2014

Is there any way user can verify the data that its enter correctly, for example I want a button on user form, after every 14 entries when user hit that button it bring the sum of 14 entries.

View 5 Replies View Related

How To Verify A Linked Table Exists

May 25, 2014

I have a group of databases, with one that I keep global values in (among other things).On initial load, I link the table to other databases, but the linked tables pile up.How can I verify the linked table exists, so I don't have to link it again?

View 1 Replies View Related

Button Shows Verify Window Before Update?

May 17, 2006

I would like to have a button on my form that would update a record to a closed status, but I want to have an "Are You Sure?" window pop up first. I did a search on "verify," "verification," "sure," and several others but haven't found what I need. I looked through my Access bible, with no luck.

Any help is GREATLY appreciated. Thanks!

View 3 Replies View Related

Verify Imported Field Based On List In Table

May 15, 2006

Hi, I'm not sure if this is possible, but I've heard you guys really know your stuff.

I have a client who would like to import a list of e-mail addresses, but would like to verify the domain name used in the provided address against a list of domain names pre-populated in a table. Do I need to use Dlookup? Here are some additional details. Thanks in advance!

MAIN_IMPORT_TBL
ID
FNAME
LNAME
E-MAIL
PHONE

DOMAIN_TBL
DOMAIN_ID
DOMAIN_NAME

AP

View 8 Replies View Related

Modules & VBA :: Verify A Network Connection / Bad File Name Or Number

Mar 22, 2014

I have a picture stored on a network file share that populates each time a particular form is opened. Every so often we lose our connection (which is a different issue altogether). Right now the error I get after much grinding away, is "Bad file name or number"

Is there a quicker way to check for the connection before it spends 45 seconds trying to find the whole path?

Code:
Dim vFolderPath As String, dirFile As String, strFile As String
vFolderPath = Nz(DLookup("FolderName", "tblCodes-FolderControl", "FolderKey = '" & "Profile" & "'"))
dirFile = vFolderPath & Dir(vFolderPath & ctrl_people_id & " *", vbDirectory)
strFile = dirFile & "profile_pic.*"
'Debug.Print dirFile
On Error Resume Next
If Dir(strFile) <> vbNullString Then
Me.[ctrl_ImageFrame].Picture = dirFile & "" & Dir(strFile)
Else
Me!ctrl_ImageFrame.Picture = "X:~stuffprofile_icon.png"
End If

View 4 Replies View Related

Forms :: Combo Box To Verify With Last Entry And Display Other Options Than Last Entry

Sep 8, 2013

I am working on creating an access database for tracking physical assets linked to locations. I need to make a combo box list to show items other than the current location of the asset. Basically I need it to refer to last enery of the user and define the new possible entries. so we have a unique relationship between location and asset. The assets and location will always remain fixed and there is never going to be any addition. I am creating a web form so that it can be uploaded into sharepoint.

View 3 Replies View Related

Calculated String Input Field In An Input Form.

Jan 30, 2005

Hello,

I need to create a field in an input form that is simply the concatenation of two other text fields. I have tried all sorts of things, but when I look at the data in the table that field.

I have a field called ID that I want to be created like this:

=Format([UniqueID],"00000") & "-" & [Mosque]

This works well in my output fields, but does not work the same way on the input form. It needs to be based on the currently input values from the current record. Anyone have any ideas?

Thanks in advance,
--Robert

View 3 Replies View Related

How To Pull Records Based On Input And Input-1

Sep 22, 2015

I need to be able to query the service dates for the bill. So I can query 1509 for the .billYYMM and .readdate and it will give me the TO Date. How do I in the same query tell the query to subtract 1 from the BillYYMM that I just entered and give me the read date for that field in that query? So Query 1 MBRHISTDETL.BILLMOYR and in the criteria box use [Enter the Bill Month Year YYMM you want to search for] will allow me to run the query at any time for any bill month year that I enter. So another field in that query is MBRHISTDETL.READDATE. So to get the FROM date and the TO date i need the following MRBHISTDETL.BILLMOYR (whatever I enter as input) and MBRHISTDETL.READDATE that corresponds and then I need [MRBHISTDETL.BILLMOYR]-1 and MBRHISTDETL.READDATE. The first gives me the TO date and the 2nd gives me the FROM date?

View 5 Replies View Related

DLookup Not Right

May 2, 2005

Can anyone see where I've gone wrong. The purpose should be if the value in the query is 0 or less (a minus amount) and the order number and part number matches the order number and part number on the form then a warning should appear. It's not picking up the record for flagging when it should:

If (DLookup("OutstandingQty", "qryremaininginvoiceamount", "OutstandingQty <= 0" & " And [OrdNo] = " _
& Me.[OrdNo] & " And [InvPtID] = " & Me.InvPtID)) Then

View 6 Replies View Related

Dlookup's

May 19, 2006

Hi,

I am pretty new to Ms Access.

I have a table which has a list of trades (Builder, Carpenter, Painter etc) going down the side and going across the top I have the number of employees (1Emp, 2Emp, 3Emp). The values in the table show the charge for that number of employees for that trade.

I have a form which has three combobox's that show the Number of Manual Employees, Number of Clerical Employees and the number of working directors and a combo box that shows the trade. What I want to happen is when the user clicks a command button on the form the charge for the total number of employees for that trade is shown in a txt box.

I have the following code attached to my button:

Private Sub GetValue_Click ()
Dim TotalEmployees As Integer

TotalEmployees = [NoManual] + [NoClerical] + [NoWorkingDir]

Value = Dlookup(TotalEmployees & "Emp", "ValueTable", "[Business] = Forms![Form1]![Business]")

End Sub.
When I type "[3Emp]" in the Dlookup it will work fine and finds the charge for that trade. But when I pass it the Result from the addition and concatenate it with "Emp" it doesn't seem to work.

I originally thought it was because I declared the TotalEmployees as an Integer by I also tried declaring it as a string - to no avail.
I just can not figure out why it will not look up the TotalEmployees.

I would much appreciate any help on this on any suggest as to how I can get the values from my table.

Charlene

View 1 Replies View Related

How Do I Use DLookup???

Jul 7, 2006

I am using Dlookup to look up LastName, I have

AssignBy = DLookup("[LastName]", Employees, "POC =" & Me.Combo22)

I am getting an ERROR ""You entered an invalid argument in a domain aggregate function"

I need AssignBy = LastName from Employees Table where POC=what is selected in Form for Combo22.

ex. POC=3 go to Employees Table find POC that equals 3 and get the LastName.

Please Help!!

Jessie

View 4 Replies View Related

DLookup

Mar 26, 2007

Please help prevent my laptop from being smashed against a wall numerous times and then being thrown out the window, after all, the wall is mostly innocent in this situation.


I have read post upon post and other dim references to DLookup in the Access Help file, etc. I am generally a bright guy (although inexperienced in DataBases, VBA and some forms of lovemaking) but I have not been able to figure out the DLookup function. Could you please give me a VERY simple explination of how to use this function and it's expressions?

If it will help, we can use the following senario...

Table_Special_Needs
Special_Need_ID
Special_Need (Data Includes: Initiatives, High Ropes, etc.)
Standard_Price

Table_Event
Event_ID
Initiatives
High_Ropes
Extra_Linens

I would like to be able to add a price field for each item in the Event table and have the table lookup the price from the Special Needs table.

Many thanks for any help you can give.

t
:confused:

View 2 Replies View Related

Dlookup ?

Oct 19, 2007

I would like to know if i am doing an Inventory in an Invoice Program and i want the [quantity] from a subform on the Orders Form to be deleted automatically from a Products Table , Would the Dlookup Function Help and if yes how would i implement it ?

Regards Dups

View 2 Replies View Related

Dlookup

Feb 18, 2008

Dear all,

Firstly, thank you all for allowing me into your group!

Secondly however, PLEASE HELP!

I've created a database for storing students details and exam records for my university department, and everthing is fine except for one final problem: In order to allow final grades to be calculated all student marks have to be stored numerically, but each number corresponds to a code: eg N=0, G2=1, G1=2 .... A1=22

I'm trying to get the student marks report to display not just the numeric code, but also the final code eg, C2. To do so I've been trying to use DLookup as follows:

Expr1: =DLookUp("[Grade Code]","Lookup Table","[Score]= Forms![Total Grade]")

where "Grade Code" is a field in the Lookup Table (ie, it lists the A1, A2), "Lookup Table" is a table listing all the numbers and their corresponding codes, "Score" is the numeric score in the "Lookup Table" table, and "Total Grade" is a calculated (Numeric) field in the open report (though created in an accompanying query). I just can't get it to work however!! When I run the report, the column is just blank, and nothing I do seems to be able to get the corresponding code (Eg, B1, B2) to appear on the report!

Please help me if you can, I'm not kidding when I say my job is on the line with getting this database to work! Once I've got this sorted, all I need to do is find a way of letting the secretaries input the alphanumeric code, but the database automatically stores that as a number. I figured however, that sorting the first problem will go some way to finding out how to sort the 2nd one!

Thank you all just for being out there!

View 3 Replies View Related

Dlookup

Oct 12, 2007

Do the Access functions dlookup, etc. cause performance issues when using remote SQL servers where the data is held?

View 2 Replies View Related

DLOOKUP Help

Nov 17, 2007

Dear all,
How are you?
I need your help.
Can you help me in this DLOOKUP function.
I want to retreive "covered period" from financial statement table where investment id = the value of investment ID from Financial statement form.
This is the syntax:
x: DLookUp("[PeriodCovered]","Financial Statements","[InvestmentID] = " & Forms!Investments!InvestmentID)

Kidly,find attached the DB.

Thanks in advance.

View 5 Replies View Related

Dlookup

Nov 21, 2007

Hi,

I am trying to use a dlookup to return the price of an item that meets two criteria. This is what I came up with, but it doesn't work. The part after the AND works by itself, but when I combine the two I either get a #Error or no values that meet the criteria.

Any suggestions? I can provide more info if needed.

Expr3: DLookUp("[Crt plan price]/1000","CPC List","[Plant] = ' " IIf(IsNumeric(Right([Date Code],2)),"Unk",Right([Date Code],2)) ' " And [Material] = " & [Item])

Thanks!

View 2 Replies View Related

DLookup Help

Feb 16, 2008

Hi all

I am trying to set a criteria in a DLookup and I don’t know if it’s possible. I’ve managed to get a result using the following code in a form but it only matches an exact date.

strValue = DLookup("Price", "Price List", "ServiceItemID = " & "ServiceItemID" & " and CStr([ContractStartDate]) ='" & CStr([Date]) & "'").

What I really need is to be able to do a between criteria on the [Date] field and check out whether that fits between [ContractStartDate] and [ContractEndDate] and then return the Price according to the [Date].

I actually want to run it as a query but have no idea how to do this. So, can a "between criteria" be put into a DLookup? and can it all be put into a select query? If so how? If not, what better way it acheive the desired outcome?:confused:

Thanks

View 14 Replies View Related

Help Using DLookup

Apr 8, 2005

I need to fix my form (ie survey) so that a user can only scroll through the current page and not to another record using the mouse scroll button.

I'm having trouble using the Dlookup function.

Please help

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved