I ran into a weird task, sometimes at my job we have to use 3 identicle records where just one thing changes and that is the date. The thing that is giving me a problem is I get an error if I try to duplicate the record due to primary key being duplicated. I have a ID field which gives all records a number and when I try to duplicate the record I am in, I get an error because of the duplication of the ID Field. Is there a way to get around this?
I have a table with about 3600 keys, numbered from 1 to 3600. When I try to enter a new record, the autonumber starts in the 20's. I get an error message about duplicate keys, and I have to cancel. If I try again the autonumber goes up by one, but it will take hours to do this with approximately 3600 tries to get past the highest exisiting key number. Is there a way to make Access reset this? THis table is linked to a many-to-many table and I can't start over or I will lose all my relationships.
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
create a macro that automatically fills in the next invoice number in sequence",,I'm assuming this macro would look at the value of the previous record and add a one to itI don't want to use a AutoNumber field as I might need
Currently if an employee attends a mandatory training session the details are entered individually into in a single table which contains all the employees' attendances to training, this is achieved via a bound form.
Works Fine.
My question is, if the training is carried out by a number of employees can this attendance be recorded on one form and assigned to each of the employees who attended?
Here is my issue. In a table with an Auto Number index some records have been deleted. I have been able to recreate them along with their original auto number. The problem is that I do not know how to append these records forcing the original auto number. I have tried changing the auto number field to a number field in the table, this works except I cannot change it back to auto number.
I am sure I’m not the first with this question or issue. I did search through a couple hundred entries about auto number before I posted this question.
Hi, basically what i want to do is append a record to a table using vba. I would like to take two values from my form (productID, supplierID) and insert them into a table (supplierProductsTBL) under the same headings. I've constructed an sql statement but am getting the following error:
runtime error '3346'
number of query values and destination fields are not the same'
I think this happens because the table also contains an autonumber field (supplierProductID) and i'm not referencing this in my sql statement (below):
mySQL = "INSERT INTO SupplierProductsTBL ( SupplierID, ProductID ) VALUES ('" & SupplierID & "'), ('" & ProductID & "')"
i wuld just get rid of the autonumber field but i need this.
Any help on this would be appreciated, cheers mark.
When I create a new record I am also generating a new Auto Number. This is so I have a sure fire way of returning the records that I want to return. I have read where it is a known issue that when using the Compact and Repair it can reset the Auto Number to a lower number and generate a duplicate Auto Number. That is the problem that I have at this time. I have tried using the Allen code but it doesn't seem to worked on linked tables. I use linked tables because I have multiple users who can access this system at any given point in time.how to have the Auto Number field select a number that is unique
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate() Dim medlemskod medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod") Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000") End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate() If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1) DoCmd.RunCommand acCmdSaveRecord End If End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?
I have a table with an auto number PK. This table will contain orders. I'd like to use the PK from this table as the Invoice number on the invoice. I'd like to have it start at a number other than "1" just because it looks better on an invoice. I don't know how to do this. I looked at the table design to see if there were options available to me there but couldn't find anything. Is it possible? (I do not know how to use code.)
The title probably doesn't give an idea of what I need, so here goes.
We currently have reference #'s for our bills that include the date requested in mmddyy format, the first 3 letters of the customer, the initials of the order taker and finally a sequential number to show the sumber of bills that day.
example: 120705SEAGMM02 2nd order taken by GMM for Seagate on 12/7 120705SEARLH01 1st order taken by RLH for Seagate on 12/7
I want to generate this number automatically based on the date entered and the initials given of the user. We only deal with one customer at our desk so that will always be "SEA".
I have a query that generates the first portion (date, customer, and initials):
SELECT Format([REQDATE],"mm") AS [Month], Format([REQDATE],"dd") AS [Day], Format([REQDATE],"yy") AS [Year], Format([REQDATE],"mmddyy") AS [Both], [Both] & "SEA" & [PickUpReqData]![INITIALS] AS REFNO FROM PickUpReqData;
But I can't seem to get my head around the part of generating the number. I know I had done this in a database I created 2 jobs ago but all my files were flooded out in Katrina. (I have since relocated to Atlanta, although I'm not looking for sympathy. But I will take what I can get!)
Anything to point me in the right direction will be appreciated. I am looking to have this on a form and feed the REFNO field in the PickUpReqData table.
I have a table called "OrderDetails" with following fields:
Num OrderID (Primary key) Product Quantity Price
I want to create a data entry subform that can used to enter order details in this table such that, for a given OrderID, the Num field is automatically set to previous number + 1. For example, for OrderID = 12, if there are 4 products that need to be entered, the 4 records should automatically take 1 , 2, 3, 4.
I have a form with an Auto number field. When the form is opened in new record mode the auto number field displays the following: (Auto Number) instead of the actual number that it has generated. I want the number to be displayed
Hi, I have a form with some fields on it, there is one called Pro Number. what I would like to happen is when a new record is created, it starts at a certain number and continues to increment by one. In other words, the first record would be 5600 and the next new record would be 5601 etc.
I did have this working in an previous database, by creating a append query to start the number, but that does not seem to be working now...
Does anyone know if this is possible. I've looked but can't find anything like it posted within the forums unless I'm searching for the wrong keywords.
If I have a list of records on a continuous form, I want to drop a combo box at the end of the each record with a list of numbers in ranging from 1 - 100. When a value is chosen, the selected record is then duplicated by that number.
For example, Select a record, choose 20 from the combo box = 20 new entries of the record.
Also, as a side issue, is there a way of omitting or clearing certain fields from the process. For example, Serail Numbers are unique, so I want the user to have to manually key these in once the duplication process completes.
I'm trying to use access to identify how many times an indiviual appears in my database. I've got a large file which gives me all referrals, each referral comes with two identifiers, one unique to the person, another unique to the referral. This means that the person unique number may be repeated multiple times (if a person has more than one referral) but the referral number would be different each time.
I've run a query to identify the duplicates, i.e. the records where the person unique identifier is repeated. What I am trying to do is work out now how many people have been referred twice, how many three times etc. The original query looks something like this (but on a much bigger scale).
Person Referral 1 A 1 B 1 C 2 D 2 E 3 F 3 G 3 H
What I'm after is a query that will tell me that two people were referred three times (1 and 3) and that one was referred twice (2) and so on.
I have a fairly simple database we are using for keeping inventory and new items get added through a form. Is there A way I can prevent a part number and its properties from being entered if that same part number has already been entered at an earlier point in time?
I make a data base every year for work orders that my work does for our customers, I have every thing set up and it looks great except for one field, last year I was able to make it do an auto number once I put the date in. for example first box work Order # ___ second box date once I put in the date an work order # would fill in the w/o# box and it would follow what ever the last work order # was (12600). for example I need the year 2006 TO START OFF WITH # 12601, What querie/option do I need to accomplish with this info.
I have an access data base and every year I (only my second year making it-ex-employee use to make it) need to make a new one to start off the year for all our new work orders.
but any way I have the form made looks exactly like the previous years but I can not get the work order box to become an auto number and I need it to tart of at 12601 and I had it so that when I put in the date the next work order # would pop in the box, and I need to get all the hours and part totals to add up.
I have 47 records in a table that were numbered 1-47 with auto number. I arranged the records in order of date increasing, and now, the auto numbers are all jumbled up. I want to have autonumber re-number the table 1-47 with 1 being the earliest date and 47 being the latest. Is there a way I can do this with autonumber? I need to continue using auto number, so I cannot simply just delete the field, and re arange the numbers manualy. what I tried to do was, delete the old auto number field, arange the table in order of date increasing, and then put auto number back in the table. All that did was give all the records their old numbers that auto number had previously given them. It's like access will not forget the numbers auto number had assigned to them.
I have a code that works great from the parent form but I decided to change the format and call it from a lostfocus event in the subform instead. Now I keep getting error 3314:"You must enter a value in the tbGuests.LastName field".
The code should copy the parent form fields and create x number of duplicate records according to a field on sub-form. It then runs an append query to add the information from the subform.
Code:
Private Sub GuestsInParty_LostFocus() Dim partymsg As Integer Dim dbs As dao.Database, rst As dao.Recordset Dim F As Form Dim intHowMany As Integer Dim intCounter As Integer
