I have a form (with subform in it) and i fill it with different values. After some time, i need to fill another record (new one), with similar values.Is it possible to make a duplicate of my previous record, and put it in the "new record" so that i won't have to fill all fields again, only change excisting ones to different values.
I have a form with a duplicate record button.Sometimes when duplicating a record the duplicate is created but the form remains in edit mode (small pencil in the form margin).I also have a manual record counter on the form which does not refresh to the newest record number following the duplication? Both issues happen together and not independently.
I now have the standard MS Access record counter visible on the form to see whats happening and this always jumps correctly to a new record number when duplication is triggered, so when the problem happens the MS Access counter is showing one more than my own record counter.
If I use the standard MS Access record navigation buttons and go back and then forward by one record, the duplicated record is then corrected. The edit mode pencil is gone and both record counters read the same, which I assume has happened this has forced a save to happen
If Me.Dirty Then Me.Dirty = False End If
- in the current event of the form, would solve the problem, but it doesnt make any difference at all, its still no better, or no worse than before?Using CTRL + S removes the pencil, but doesn't correct my bespoke record counter?
I have an Access 2010 database with two tables and two forms. The tables are Organizations and People. Similarly, the forms are Organizations Entry Form and PeopleEntryForm. The People are linked to the Organizations table. Several people can be linked to the same organization.On my Organizations EntryForm, I created a command button to duplicate a record using the wizard. It works fine.
I did exactly the same thing on the PeopleEntryForm, but instead of copying the record, it creates a new blank record. I don't get any error messages. Is my problem due to the fact that the People table is linked to the Organizations table?
I have a database with a table that uses a numeric field as a PK. If I use the built in "Duplicate" Command button on a form it creates an exact duplicate of the record, which then Access won't allow because the PK is no longer unique.
Does anyone know of a way that I could make the number be the max number + 1 when I click the "Duplicate" Button?
I have a recored set and i dont want a duplicate of the record set in the same table.
Say if my table name is businessskills and contains three fields(columns) and their names(Email , B_code, Rating) highlighted in red with data are as below
The access table has one primary key StudentID which is indexed with no duplicates. (StudentID consists of schoool ID + an auto increment #)
When a second student is entered with the same name and birthdate into the table but with a different studentid the record cannot be saved as there is a duplicate value. If the birthdate is removed the record can be saved. If another character is entered after the first name with the birthdate the record can be saved.
I have tried adding time to the record, that did not solve it. I tried changing name and birthdate to index yes duplicates okay that did not solve it.
The only relationship is on studentid, I cannot understand why the birthdate is the problem when there is no relationship or primary key on that value.
Has anyone experienced this issue and can explain why access views this as a duplicate record when in fact it is not!
When i try to execute the code via a comand button, i get an error and the duplicate record operation does not occur. one thing i noticed is that i have a lot of lookup fields (i.e. FK's to lookup tables one-to-many relationships) in underlying table being populated by the form. i've created combo boxes on the form to populate the FK's in the underlying table. the error that occurs when trying to use the above code produces a "paste errors" table and in that paste errors table instead of the bound column values from the combo boxes (i.e. PK values from the lookup tables) it shows the display values from the combo boxes. i'm not sure if this has do with anything, but i couldn't figure out why it was doing this.
does anyone have any ideas how i could get this duplicate record procedure to work?
On my form I've got an afterupdate event that checks if the information entered already exists and this works absolutely fine. However what I would like is the option to go to the existing record if one is found, but I can't get it to work.
This is my code currently;
Code: Private Sub Job_No_AfterUpdate() If DCount("*", "PACKING", "[Job No>]='" & Me.[Job No] & "'") > 0 Then If MsgBox("Job Number already exists! Go to record?", vbYesNo, "DST PLANNER") = vbYes Then Dim rs As Object
[Code].....
The check for the Job Number works fine but when I click Yes on the message box, the form stays on the current record instead of moving to the existing record.
i managed to get checking for duplicate record by ONE field ie member_no
code :
If DCount("*", "runner", "member_no = " & Me.member_no) > 1 Then MsgBox " This member is already exist!" & vbCrLf Me.c_memberid.SetFocus Else DoCmd.CancelEvent End If
how i want to get checking duplicate record by TWO fields ie member_no and run_no ?
I have a search form passing text from unbound controls to a query. These two fields (AuthorName & Title) of the query are from two different tables (Authors & Papers) set up in a many to many join. The 3 dummy records I am using are as follows:
Record 1 AuthorName: Smith (Author 1) Title: SmithTitle
Record 2 AuthorName: Smith (Author 1) AuthorName: Jones (Author 2) Title:SmithJonesTitle (i.e. two authors for this record)
Record 3 Author: Jones (Author 2) Title: JonesTitle
If I stick in 'Jones' into the Author field and 'JonesTitle' in the Title field I correctly get 1 result from the query (record 3). However, oddly, if I put in Smith and SmithTitle I get two records (2 x record 1)!!!!! There aren't two records!!! Similarly if I leave both blank I get all the records and again there is a duplicate of the Smith record (and only this one is duplicated!)
The query criteria are:
[AuthorName] Like [Forms].[Search]![Author] & "*" [Title] Like [Forms].[Search]![Title] & "*"
I have a problem with duplicate records in my query. I know why the duplicate records are occuring and I have spent a ridiculous amount of time trying to fix the problem, but I'm really at a lost and am quite desperate for some help.
Here's some background info that shows the cause of the problem: I have two tables. In the first table (tblMainData), there are three columns of interest (P1, P2, & P3). The second table (tblGroupList) has two columns (PN & GroupList). A relationship exists such that the data in "PN" is parital-text values of the data in columns "P1", "P2" and "P3".
For example, "P1" in tblMainData may contain "A1235XX". The "A1235" is what's important, so that's one of the values that I have in "PN".
Continuing, I have a user form that uses the "GroupList" field as the RowSource for one of my combo boxes (cboGroup), and this field contains an (ALL) option. So, when a value is selected from cboGroup, I use the following Criteria filter Like [PN] & "*" in my query (qryFilterGroup) to look for those partial text fields that match what's in fields P1, P2 and P3. The results are then shown in a subform.
Here-in, I believe, lies the source of the duplicate records. In my userform, if "(ALL)" is selected under the cboGroup combo box, a new record is created for each field P1, P2 and P3 in tblMainData that contains data and that is related to the partial text matching Criteria. A new field is created because each field corresponds to one of the values in the "GroupList" field.
This is really difficult to explain, and I don't really know if I should continue without writing a book. If someone or someone(s) could be so kind, please have a quick look at my attached database as it's obvious to see my problem. Any help is greatly appreciated!!
Before the record is written for the first time OR edited/updated to the table, I want to search tblClass and determine if the new/updated info will create a duplicate record.
In this specific case, a duplicate record will be defiened by a record where the only fields being considered would be StudentID, Trimester and SubcatID. The fields WorkGrade and SkillGrade should not be considered.
The code I came up with was the following and it was put in the BeforeUpdate:
Dim conn As ADODB.Connection 'Connection Object Dim rst As ADODB.Recordset 'Recordset Object Dim strSQL As String 'SQL statement for open statement
' Create object variables Set conn = CurrentProject.Connection Set rst = New ADODB.Recordset
' Create sql to search for records in tblClass that match 'studentID, Trimester, and Subcatagory in the form record being added strSQL = "SELECT * " & _ "FROM tblClass" & _ "WHERE fldStudentID = " & StudentID & " AND " & _ "fldTrimester = '" & Trimester & "' AND " & _ "fldSubcatID = " & SubCatID & ";"
' Open recordset rst.Open strSQL, conn, adOpenKeyset, adLockOptimistic
If rst.RecordCount >= 1 Then ' record already exists in tblClass msgbox "Record already exists!",, "Duplicate Record Error" Me.cboSubcatID.SetFocus Cancel = True End If
' Close and disassociate object variables rst.Close conn.Close Set conn = Nothing Set rst = Nothing
This code worked great except when I went to edit an existing record. When I went to change a grade (WorkGrade or SkillGrade) on an existing record, it told me that I could not enter the record because the record already existed (ie, the record I had open and was editing). I am not sure if it is my code that I need to edit or if it is the placement of the code I need to change.
I have a document database that often deals with multiple copies of a document. Each copy must have a record of its own. With the add new record form I would like the user to be able to add the extra copies automatically by duplicating the first entry "n" times but also incrementing the copy number field by one for each copy. Got the duplicate copy done OK but am stuck on how to increment the copy number. This database forms part of my yearly assessment and is due in a couple of weeks so would welcome some help.
This is an intersting question that my friend ask me... hope someone can help to solve it.
In a combo box i use to list out all the company in a table that with the duplicate of the company is allowed. Do someone have a good idea to filter the combo box when detect a duplicate data and just showing one of each company only? or can i create a query with just listing one of each company from the table with all those duplicate company data?
I want to be able to copy, or duplicate a record including all the associated records of the subform. The structure is the typical, ORDERS, ORDER DETAIL, PRODUCTS. I want to be able to copy a specific ORDER and generate a new one with all associates products. It would be nice to change one field (ORDER NAME), changing the ORDER name would simulate the "Save As.." command.
The end result would be a new Order identical to the first one (including all sub items) but with a different name.
I ran into a weird task, sometimes at my job we have to use 3 identicle records where just one thing changes and that is the date. The thing that is giving me a problem is I get an error if I try to duplicate the record due to primary key being duplicated. I have a ID field which gives all records a number and when I try to duplicate the record I am in, I get an error because of the duplication of the ID Field. Is there a way to get around this?
I have a form based on a query and have written code to display a msgbox if a duplicate entry is inputted in the NHS_Number field in the form. I have also added code "me.undo" to clear the form so that it is not saved. I am looking for a piece of code that will display the duplicate record. Here is my code thus far:
Private Sub NHs_Number_BeforeUpdate(Cancel As Integer) Dim dbs As Database Dim rst As DAO.Recordset Dim x As Integer
My query lists duplicate records which I append to a new table. from that table I would like to delete the duplicates but save the first record of each duplicate. example the fields are employee and date worked. I would like to keep joe smith 1/1/14 but delete the other joe smith 1/2/14 and joe smith 1/3/14 ...
I am having an issue with one person having trouble getting an error when trying to duplicate a record.
The subform is set up with a button to duplicate a record. This allows most of the data that stays the same to be copied to a new records and then minor changes can be made to update the record for the new month. Since there are memo fields, in these records, this saves a lot of retyping. One person who is using the database gets the following error when clicking on the duplicate record button.
The command or action 'Copy' isn't available now.
It makes a new blank record but won't copy over the information. You can go to the record and copy each field individually and paste it into the new record, but this is not very practical.
I have not been able to duplicate the error and no one else using the database is having this happen.
I have a table with duplicate ids. When I have a forum popup another form, the forms are linked by ids. This works great except for one problem. There are duplicate ids. So if I pop up a form then it will go to the first record that that id exist. This is not good if you are going to add another record. Therefore, I need to create a unique variable for a record. The autonumber would be a great variable but it seems I cannot use it to filter. Unless someone can show me how. Is there another way to create a unique variable automatically for a new record?