Hi,
I have made a query from different tables; however, my query is returning about 5 rows for each person because some fields in the query return more than 1 row.
Is there anyway to fix this problem?
Thank you,
B
I have a strange 'bug'.
I wrote a query to return the TOP 32 items for a key. Works fine:-
SELECT TOP 32 [my Disks Coefficients sub].[thier Disk ID] FROM [my Disks Coefficients] AS [my Disks Coefficients sub] WHERE [my Disks Coefficients sub].[my Disk ID]=1 GROUP BY [my Disks Coefficients sub].[thier Disk ID], [my Disks Coefficients sub].coefficient ORDER BY [my Disks Coefficients sub].coefficient;
I then plugged this into a query in the WHERE clause using In (Select Top .....;); [changing the =1 condition to pick up the correct id from the emcompassing query]:-
SELECT [my Disks Coefficients].[my Disk ID], [my Disks Coefficients].[thier Disk ID], [my Disks Coefficients].coefficient FROM [my Disks Coefficients] WHERE [my Disks Coefficients].[thier Disk ID] In (SELECT TOP 32 [my Disks Coefficients sub].[thier Disk ID] FROM [my Disks Coefficients] AS [my Disks Coefficients sub] WHERE [my Disks Coefficients sub].[my Disk ID]=[my Disks Coefficients].[my Disk ID] GROUP BY [my Disks Coefficients sub].[thier Disk ID], [my Disks Coefficients sub].coefficient ORDER BY [my Disks Coefficients sub].coefficient;);
This runs fine but the the number of items returned is for each key is less than if I run the Top query by itself for each key seperately? So when I run it stand-alone for ID 1 I get 127 rows (there are many equal coefficients); when I run it as a sub-query I get only 121 rows for ID 1!
Anyone any ideas?
Martin
I have a subquery on a table which got the previous and next rows from a table. This worked fine, until I started replacing my table with real data instead of dummy-data. I now receive the "at most one record can be returned by subquery" error every time I run it. I checked that I do not have any identical rows.
My query:
Code:
SELECT z.DateFrom, z.DateTo, z.ArticleID, z.retailerID, z.Actuals, z.Statistical, (SELECT y.Actuals FROM tblActuals AS y WHERE (y.retailerID=z.retailerID) AND (y.ArticleID=z.ArticleID) AND ((DatePart("ww",z.DateFrom,2,3)-1)=DatePart("ww",y.DateFrom,2,3))) AS ActualsMin1 FROM tblActuals AS z;
I append new rows via a VBA-script from another table.
Hi,
I would like to count the number of records returned from a query, but am unsure how to do this using VBA.
Any help appreciated.
Thanks
Hello all. I need some help calculating the total number of records returned in a query anytime i run the query.
I have a form that creates an SQL statement and changes the querydef at runtime and displays the results in a listbox. I want to include on my form a percentage of the total records from the table based on the records returned in the query Ex. (5/10) so I can use this information on a report.
What I am trying to ultimately acheive is to calculate an attrition rate based on the number of (clients that leave in a given period / total new clients added in the given period )
thanks for your help!
tony-t
Hi all, I've searched this with no success.
I have a ODBC (Firebird) table linked using a DSN connection which has >300 fields. In Access, the linked table only show 256 fields (max for Access). Otherwise the link works fine. I have no control over the source Firebird table.
What I'd like to do is limit which fields from the Firebird table are shown in Access. I don't need all the fields, but I need some that are at the end and are not linked in the current setup.
I'm very much a novice at using ODBC, but can I somehow use SQL or some other method to specify which fields to show in the linked table?
Thanks for any suggestions,
John
I am trying to use Dcount to find the number of records in a query and put it on a text box in the header of a report. The query is a parameter query. The button opens a form which asks for start and end dates, the query reads those dates from the form and the report displays the correct number of records that fall within the date range. The query is based on another query, which is based on the table. I tried =dcount("*","qryName") but I get #error. Maybe becauase of dates? or parameters?
Access 2010, Windows 7
I'm trying to run a line of code after doing a Query Search that reports back the total number of results pulled from the search. I've dug around and found some useful code, but nothing that gives the results I'm needing. Most everything gives me the total number from the query. I'm also using a Split Form.
The process goes: Enter numeric search in Text10 and hit the search button to run the following macro: [studentID]=[Forms]![Query1]![Text10]
It then gives me the requested information.I have a second text box (Text19) that needs to display the number of pulled results. I've written VBA that only gives me the total number searched for studentID or for the entire Query.
Can I simply add an additional line to the Macro?
All; using 2010. How can I get a subform to grow or shrink based on num of records returned? Its a continuous subform. Tried changing Vertical and Horizontal Anchors as well as some VBA suggestions but havent been able to make any of them work.
View 2 Replies View RelatedI have an Access2007/SQL Server 2012 system with 20 users for an insurance company. The company does most of its business via a network of vehicle dealers around the country. If someone comes in to buy a motorcycle, boat, or recreational vehicle at a dealership they need insurance to take it home, and our dealers send the quotes to us.
The dealers, in turn, receive payment from us each month for their efforts. Some are paid a % commission on the premium, some are paid for each quote they send regardless of whether the policy actually sells or not, and some are paid a set amount per sold policy. (Yes, that is relevant information!)
We already have reports that tally the amounts due each dealer based on their payment scheme, but last month our bookkeeper had to write about 650 checks manually because the check writing is not automated. She'd look at the report, and then enter name, address, and amount (in digits and words) into Quick Books and print the checks from there, a horribly tedious process. I've been asked to print the checks from Access. Basically one click would print all 650 checks.
I've opted to use a Make Table query to move the commissioned dealers amounts to a single location, and then to run two append queries to add the records from those paid per quote and those paid per policy. At the end of the day, one table contains all the information necessary to print the checks...except one.
The check number.
I need a way to sequentially number each record in the new table with a user generated starting point, the first check number.
By the way, the check blanks are on standard letter sized paper, three to a page, with tear-off perforations to separate them, in case that information has any relevance.
I think the best way to accomplish this is from the report itself. I've created a blank field on each record for the check number, and what seems most logical is that the sequential number is generated on print and written back to the table, rather than just generating all the numbers at once. That way, should print ever be interrupted, it will be easy to take up where we left off.
I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
Hi Everyone
I have been searching EVERYWHERE, but was unable to locate even the correct wording of my problem, so I decided to see if there is anyone here solve this riddle for me:
I have a simple table with 2 fields
ie :
NAME NUMBER
George 5
John 3
etc...
I have the need to make a report that makes stickers and make 5 stickers with the name George on it and 3 with the name John etc...
I cant even think of a query that would produce 5 rows of George followed by 3 Johns (;})..
The actual problem is more complex than this ( many times ) but this is what is holding me back atm.
Thanks in advance people, and I would like to say that I have learned VERY VERY MUCH from this site alone , and within a month from starting to learn Access for the first time, I have succesfully made a database that is working just fine for invoices and keeping track of inventory....
Today a guy who has done some Access programming told me that an Access table has a limit on the number of records.
Whereas I was thinking the only limit is the 2 gig size.
Which one of us is correct here?
(Access 2003).
I need to do a count of the total number of rows in a table or query. Say I have a table with 7 records, I want to be able to get total number of rows instead of the sum of the row and save it to some other table.
View 5 Replies View RelatedSimple question - All I need to do is display the row numbers of a query I have created....For example:
1 St. Joes
2 Holy Family
3 St. Peters
I am not looking to rank anything, I just want a constant row of numbers for about 115 records.
Thanks So Much.
I have an address database where people have been allowed to type in any characters they want in place of just leaving a missing field blank. For instance the Zip code was not a required field (don't as me why because I don't know. It just wasn't) so over the years when the person entering the data didn't know what the zip code was they would put a ?, a 0, a 000 or a period or what ever else they could think of at the time.
I would like to add a filter in my query where I could eliminate any thing with less then a certain amount of characters.
I thought something like this would do the trick
Zip: IIf(Len([V_ZIP]<5),[V_ZIP],"0")
But I am getting a data type mismatch in criteria expression. Any ideas of what I am doing wrong?
I need to write a code that checks if every 6 lines in a table contains a string. If it contains the string, then carry on looping, but if it does not, it will delete the current line and the previous 6 lines before it. The program should then continue looping through the entire table.
For example,
Code:
Apple
a
b
c
d
e
Apple
f
g
h
i
j
Apple
l
m
n
o
p
q
Apple
.
.
.
I need to find the string "apple" in every 6 lines. So, that means that the first 2 Apples are fine, but for the third one needs to be deleted as it contains 7 lines instead of 6.
I am looking for a way to limit the number of rows that are added to the subform of a main form. Is there anyway that the allowable number of rows be defined using a field on the main form.
View 3 Replies View RelatedI have a table ("Student Info") that looks like this:
ID....Student.....Student #......Teacher Name......Teacher ID
1........A...............432...............Alice.. .................62
2........B...............674...............Alice.. .................62
3........C...............875...............Alice.. .................62
4........D...............934...............Katie.. ................18
5........E...............345...............Katie.. ................18
6........F...............134...............Dan.... .................4
7........G...............734...............Dan.... .................4
The above table suits me well for data entry.For analysis reasons, I want it to have another table or query or something (let's call it "Teacher Info") that looks like this:
Teacher ID....Teacher Name....St1.....St2......St3...St#1...St#2...St#3
62......................Alice...........A......... B........C.....432.....674.....875
18......................Katie...........D......... E........-.....934.....345......-
4........................Dan............F......... G........-.....134.....734......-
Is there any way that I could do this? I have been struggling with this for a while.Just so you know how this data is connected - At the moment, I have a form where I put in new Teacher information. I have a subform attached to that, where I put the student names and numbers. This way, the students are linked with their student #s, and each of them are linked to a teacher. Unfortunately, the table ("New Teacher Registration") that this creates looks like this:
id....Teacher Name
62...... Alice
(+ tab).........A.........432
...................B.........674
...................C.........875
18.......Katie
(+ tab).........D.........934
...................E.........345
4........Dan
(+ tab).........F.........134
...................G.........734
I created the "Student Info" table (above) from this to work with data entry (drop-downs and such). Now I'd like to create a "Teacher Info" table (above) for analysis.
I am trying to count rows in the result of one of the queries and I am having a bit of trouble getting it going.
The current code - this is executed as on-click event when clicked on List Box feed with query below.
What I want to add is simple if that when number of rows produced by the querry is 1 it will enable a picture item in the different part of the form, however it does not want to count the rows for me.
Code:
Private Sub search_items_Click()
Me.OBSFullFilledOrdersHolder.Enabled = True
mysql = "SELECT orders.[order id] , STUDENTS.[first name]& ' ' & students.[surname] AS Name, students.[contact name] AS ContactName , ORDERS.[Online Bookshelf order] AS OBS , STUDENTS.[Delivery Address 1], STUDENTS.[Delivery Address 2], STUDENTS.[Delivery Address 3], STUDENTS.[Delivery Address 4]"
[Code] ....
The query itself works when tested but when used in code with DCount function will return error: Run-Time 2471 the expression you entered as query parameter prouced this error
'[Forms]![FULLFILL ORDERS]![search items].[Column(0)]'.
I have an access DB.I have an XLSM Data Sheet.In the XLSM I have A few Rows with Fields.In the Fields I have a few matching fields as in the Access DB.I also have a few extra fields that i want to add to the Access DB
I want the new fields of the ADB to Populate from the XMLS in the proper rows based on the ID number in the ADB.
hello,
another problem that I have is as follows:
I have 2 txtBoxes and a button (txtA, txtB, btn). When opening the form I fill in txtA and txtB. Now when clicking on the button "btn" (OnClick event), the program is supposed to compare the values in the 2 txtboxes. If they are equal (txtA=txtB), then I have to do something which is not relevant to my question. In the code I type:
if (Me.txtA.Value = Me.txtB.Value) then
' DO WHATEVER
End if
and it does not even go through the conditional statement if to do whatever I want the program to do inside the if. I would really appreciate anyone's help.
Thank you very much
PS: By the way, thank you boblarson and rainman89 for the past question, both solutions worked, I used boblarson's but I have to click on the form when it's opened in order for the changes in the table to take effect.
Hello guys & gals on here.
I've been struggeling with this problem for a couple of days now and finally decided to post here and kindly ask for assistance. I've got a pretty strong OO background, but haven't worked with databases much...
I'm trying to set up a small client database for my company. The client companies have staff members (StaffClients). Client staff can attend Events and work on Projects, which I've managed via junction tables. Our own Staff can also attend Events and work on Projects.
I've uploaded my first draft of tables and relationships here:
http://img514.imageshack.us/img514/3937/snapjl9.jpg
(sorry for the blurred bits)
Now I think I've done a fairly good job in normalising the tables, but one thing that I keep stumbling across is that I need two almost identical tables: one for our Staff and one for StaffClients.
They are subtly different, e.g. StaffClients have some extra attributes, such as JobTitle, Department and one StaffClient can be the assistant of another StaffClient (also done via a junction table). The other difference is that client staff can have different roles in a project (MainContact or Assistant) compared to our own staff (Manager or TeamMember).
As a result of these differences I have set up separate junction tables for both Staff and StaffClients, but are obviously very similar.
My question is: Is that structure sound? Or can I simplify it somehow before setting up the forms for the data entry?
Your input is kindly appreciated!!
Hello,
I have a problem with one of my tables and don't know where to start to fix it. This is where I stand: I have a table with 5 columns, there is no single primary key. I have duplicate entries of 4 of the 5 columns and a count number as the last column. I need to eliminate the duplicates of the combination of the 4 columns but add the count of the duplicates. Let me illustrate for you to understand better:
this is the original table:
col1 col2 col3 col4 col5
A B C D 1
A B C D 5
A B C D 2
W X Y Z 3
W X Y Z 5
W X Y Z 4
I need to obtain this in a new table:
col1 col2 col3 col4 col5
A B C D 8
W X Y Z 12
Oh, and keep in mind that the original table has almost 6 million rows that will probably get reduced to about 500 000 after this process.
Any help would be appreciated. Thanks
Hello All, I am looking for any advice on the following dilemma. I have a table with new monetary transactions that come in every day. I would like to have the transactions(one debit and one credit) that net to zero eliminated from the table automatically. What I was thinking was to have an abs amount column added and run the duplicates query as a delete query based on this column, but that would not only eliminate the amounts that net to zero...but similar debit and credit amounts. Does anyone have any thoughts on the most efficient way to do this? Im sure the answer is staring at me in the face, but I cant get my head around it. Thanks in advance!
View 3 Replies View RelatedI have a string with one or more double quotes in it. How can I remove the double quotes? (I was able to remove single quotes.)
Example: Purchase "other items". (This the data in a column.)
I want to change it to Purchase other items