Hello,
I've recently been told how to enable/disable fields in a form by ticking/unticking a box. Is there a way that, on a tabulated form, i can only disable/enable the field for the same record as the one the check box is in rather than for every record?
Any help will be greatly appreciated.
Thanks,
Phil
hi, there is this form i want to create which uses a drop down list.... i want to be able to auto enable and disable selective fields upon selecting one of the choices.
e.g. in a drop down list containing: choice 1, choice 2 and choice 3
and there are the fields field no. 1, field no. 2 and field no.3
If i select Choice 1 --> field no. 1 get enabled and the other 2 gets disable... so on and so forth....
How do i go about doing this?
Hi,
Is it possible to enable and disable fields on a form with another field that is a check box?
i.e. a text box is greyed out until a check box is ticked.
Any help is appreciated,
Cheers,
Phil
I need to create a form to enter data from a survey, and ideally some sections of the form would only be completed when the answer to a first question is "yes". How to do this enabling/disabling of fields for data entry?
View 3 Replies View RelatedWorking in the theatreworld, I'm trying to create something which will usefully combine my contacts and also a database of which shows we have done (dates, actors involved etc, etc) and what shows we have bought in.
So far, I have created my form which has the usual fields (name, address and so on) and also a field which asks users to describe what type of contact they are ie. are they an actor, or a director, or a theatre company.
There are also two command buttons, which will either open up another form which lists all the productions they have been in with us over the years (In-house productions), or one that opens up another form which lists what shows each theatre company has brought to us.
I would like to be able to select 'actor' in the category field which will then enable the command button for me to see what productions that person has been in. Or if I selected the 'theatre company' category then the other button becomes enabled.
Can anybody advise me on this please? Alternatively, if this all sounds far too convoluted, then I am open to suggestions!
Many thanks in advance,
Popps
Hi, I have a form called Product Details Display Form, which is for Product Details Display table. This form contains a button "Done" which saves everything into the table, or in other words, bounds the unbounded textboxes to the table. Basically, I want this button to be disabled at the begining, when the form loads, and when the user enters ALL the fields, it becomes enabled. Here is the code I have at the moment:
Private Sub Form_DataChange(ByVal Reason As Long)
If Me.Product_Brand = Null Or Me.Product_Code = Null Or Me.Product_Name = Null Or Me.List34 = Null Or Me.Price = Null Or Me.Details = Null Or Me.Discount = Null Or Me.Combo0 = Null Or Me.Combo2 = Null Then
Me.Command36.Enabled = False
Else
Me.Command36.Enabled = True
End If
End Sub
I also have Me.Command36.Enabled = False in the Form-Load. I dont really know if it has to be in Private Sub Form_DataChange or not.
Please help me ASAP
Thanx in Advance
Basically I have a continuous form with each record having a textbox and a checkbox. There can only be one checkbox ticked per record but what I want to do is to stop the other checkboxes from being ticked if one is already ticked.
View 2 Replies View RelatedHi everyone,
Firstly apologies for posting what is likely to a really simple problem and probably has been explored before. I have been looking through other treads but nothing that I could identify really fits the bill.
Essentially based on choices made against a combo-box, I wish to lock or hide combinations of fields/combo box within the form. Realistically I want to lock rather than hide.
All the fields/combo boxes in the form I want to effect are bound.
I can effectively do this as long as the fields/combo-boxes are unbound, but it seem to fail when they are bound.
Any assistance would be really helpful so thanks in advance.
I want a form to default open in read only mode to avoid users deleting info. I want them to be able to edit the form by pressing a button. Does anyone know the VB code to run from a command button to do this.
Regards :confused:
I would like to be able to disable 2 other fields on a form if a user selects a certain item from a drop down list on that same form....????
ANY HELP
I have a form with fields that gray out or disable depending on selections. If you make selections that result in disabled fields and then save/close it, how do you ensure the fields remain grayed out/disabled when you reopen it?
View 4 Replies View RelatedI am trying to disable a field in a form based on a value in a field on a different table/form. I have been able, through simple VBA code, to disable fields based on a value in the same form. Are queries/sub forms the only way to go?
View 7 Replies View RelatedHi,
I have a data entry form in Access 2000, and when people scroll the mousewheel or press tab enough times, all the data they've entered disappears! Is there anyway to prevent this? I have instructions on getting a .dll to block the mousewheel, but nothing for the tab, any help?
Anyone know what impact it would have to my table if people used mouse/tab to clear their data, and then added data to the blank form? I presme it's just creating a new record, but I could be wrong.
Thanks,
Toby
I am wanting to grey out/disable a field on a form based on entries in two other fields being the same. One of these fields that contains the data to be referenced in on a sub-form.The form is called 'Payment_Information-Form', the field to be greyed out/disabled is called 'SUF A Paid?'
The fields that are being referenced are: 'Set up fee in s (SUF) Recrt Restriction A <=' which is on the main form, and 'SUF_Letter' which is on a sub-form (within the main form). The sub-form is called 'Costings_11_Previously_Paid_SUF subform'.If 'Set up fee in s (SUF) Recrt Restriction A <=' equals 'SUF_Letter' then grey out.I tried the following formula in both the On Current and After Update sections but it hasn't work.
=IIf([Forms]![Payment_Information-Form]![Costings_11_Previously_Paid_SUF subform].[Form]![SUF_Letter]=[Set up fee in s (SUF) Recrt Restriction A <=],[SUF A Paid?].[Visible]=True,[SUF A Paid?].[Visible]=False)
How to disable fields in Access based on data entered in a previous field? For example if "yes" is chosen from a drop down show "Date field" if "no" is chose hide "Date Field".
View 2 Replies View RelatedIs there a way to disable my print report button if the user has not hit the save button ???? and maybe display a msg box?
attached a snippit of my form.
I have a database with a table with company names, then a relationship to another table that shows that companies' address, but I also want there to be an address 2 and 3 and so on, and some of our companies have multiple sites.So what Im asking is how would you be able to show multiple data, on a sing record.
View 3 Replies View RelatedI have 3 tables, and I want to enter the data into them using 1 big form.
When I use wizard to create form, i manage to add fields from 2 tables, but once
I get to 3 tables, the form ends up not displaying anything. I am just wondering if
anyone can help me with the above problem, thanks in advance.
I am using Access 2010 and I have a table containing a list of chemicals (Analytes) that I am working with and their Chemical Abstract Service number (CAS). I am trying to use this table as a basis for generating other tables that will be used to create quality control criteria for specific analysis methods. As such, I will need both fields populated for each subsequent table. I have been able to successfully create a lookup that will pull the Analyte name, but I want the same lookup to fill the CAS number. How do I make this work?
View 14 Replies View RelatedI have a subform with two fields whose record source is a Query ("subquery")
Code in the query is as follows:
"SELECT Sum(capital) AS cq1
FROM capital_act WHERE (((capital_act.month)='jan' Or (capital_act.month)='feb' Or (capital_act.month)='mar') And ((capital_act.projectid)=forms!frmplan!projectid)) ;"
This query updates the field cq1 in my subform. I want to add 3 other fields for the 2nd, 3rd and 4th quarters. For instance the second quarter field cq2 field would have the capital_act.month as 'apr' or 'may' or 'jun' and so on...
cq1 value gets updated fine. I dont know how to add the fields cq2, cq3, and cq4 on the same subform whose record source would be the same query ("subquery").
I added a second SQL statement in the same query ("subquery") for cq2 but access does not let me add it.
Can somone point me in the right direction please?
Thanks.
I am trying to update several fields all at once in one single query. Also, I can only use the Design View (No SQL)
The weirdest thing keeps happening though: The more fields I enter to get updated, the less rows get updated.
For example,
When I have only one field that gets updated and I click "run" the window pops up saying I'm about to update 9 rows. It asks me if I'm sure I want to update those records so I say "no".....
Then, I add in another field and click "run" and the window pops up daying I'm about to update 8 rows. When it asks me if I'm sure I want to update those records, again I say "no"......
Then, I add in another field and this time it says 7 rows..... and the trend goes on and on until it says I'm going to update 0 rows.
I have about 15 fields I need to update all at once. I don't get why its not letting me update them simultaneously.
Hi everyone . Please I need help with this
I have a db with 22 records: (A123,B456,C789...Z999) I want to be able to read each record and extract from each one the same data fields and make a big single record out of the reading:A23+B56+C89...Z99 The reason of doing is I want to be able to show on a form the data extracted from the multiple reading.
I tried a crosstable, but gave no much room to work with. I think if I use 22 different queries it wont look professional and hard to maintain. I've being considering better a loop with maybe multiple if conditions but I dont know how to apply it. Something like
newrecord = ""
for x=1 to 22
read record x
newrecord = newrecord + record x
next
Thanks
I wrote a database several years ago and recently pulled it out to give to a friend. The problem is, back then (not knowing better) I set the Employee table up with as a single field "NAME". Now, in order to make it effective, I need the Employee's name in four (4) parts (First, Middle, Last, Suffix).
I have several queries based on the "NAME" field and and would like to avoid changing all of them. I have a simple form "frmUpdateEmployees" that populates the Employee table and Name field. I was hoping to change the form and/or add a query that would be easier and more simple.
Table: Employee
Field: Name
Form: frmUpdateEmployees
Queries: 16 that depend on the table and field above.
Hey buddays,
I'm not sure what the definition of this type of concatenation is, so I'm having trouble searching for it.
I have three tables - one is tblNames (with ID, first_name, last_name) with 25 records, and tblStates (with StateID, state_name, state_abbrev) with 50 records, and the requisite join table between them - tblNamesState (with autonumber and the two FKs), because some of the folks in tblNames can have locations in multiple states. Good enough.
But now it's output-to-spreadsheet time, and I want to run a query that will give me 25 records, and concatenate the location records in a single row. An example would be:
first_name | last_name | state_name
John | Johnson | AL, AK, TX, FL
Eddie | Edwards | MA, TX, FL
Sally | Smith | VT, WA, CA, TX
How do I concatenate records from a single column?
Thanks for taking the time to look at my problem first of all. I have a form that shows records but I want a button next to each record that will append that one single record to another table that is built exactly the same, which is for historic records. Not the brightest on Access and I can only manage to append all records.
As an example, I have an employee record that have a task, when the task is complete I want to append the record to a historic table that I can look up later on. However, just that one employee and not all that are in the current table.
Hi all,
I already have a form where you specific the date and the store I've purchased something at. I want to be able to add several products I've purchased to a table and define their price, using the same form, so I don't have to input the date and store type for each purchased product.
So, when the form updates the table, it will create a new record for each product, using the product description and price - defined for each product - and using the date and store - defined once - as elements of the record. Is there a way of doing this?
I'm quite familiar with creating tables, forms and queries with the design wizard - not so familiar with using scripts, but I've had a small amount of experience with manipulating databases using MySQL, so I'm willing to learn anything that may be necessary to achieve what I need.
Bugme