Enter Text Into A Memo Field Using A Drop Down And Button
Dec 6, 2005
I have this database which has a comments field which often gets the same text added into it depending on what is in it. what I am trying to do is something similar to signiatures in outlook express.
What the end user wants to do is select from a dropdown box what text they want to add to the field and hit a button and it will insert it into the memo (comments) field in the form without overwriting any of the text they have in there already, they might want to just add one of the sentences or several.
Does anyone have any suggestions on how I might go about this?
I have a database with two memo fields. Both have exactly the same properties in table design view.
One field is called 'notes' and when I want a new line I just have to hit ENTER. Result is as wanted.
The other field is called 'responses' and when I hit ENTER, the cursor jumps to the next field (as if these were a text rather than a memo field). it does not start a fresh line. However, this field has not length restriction; I can copy and paste any number of lines into it. But I must not hit ENTER, and I cannot produce a line break.
As I said above, both fields appear to have exactly the same properties in Design View. Why then do they behave differently?
We need to move rich text from an Access memo field to a Word text box. So far the best Ive been able to come up with is in the code below. In this code pprs!What is a record set field of a table memo field that is bound to a text box enabled for rich text. The rich text seems to be stored as html as so I can get word to convert it by enclosing it in html tags.
Dim What As Word.Shape Set What = doc.Shapes.AddTextbox(msoTextOrientationHorizontal , doc.PageSetup.LeftMargin, 225, 534, 0) Dim sPath As String sPath = "G:Temp.html" Open sPath For Output As 1 Print #1, "<HTML>" & pprs!What & " </HTML>" Close #1 What.TextFrame.TextRange.InsertFile (sPath)
Are there any other advantages in using a text field verses a memo field other than memory allocation? Memory allocation seems like such a small issue these days.
Hello everyone - what I have is a a set of default text's that I need to be able to insert into a memo field - this is how I've set it up (Access 2000)
A table with the text fields in it called wordings table comprises of Id field wordingnme (txt) wording (Memo) and I have a combo box on a form which looks up the wordingnme and hold this info - I need to have a button that will take this wordingnme and insert the wording that it relates to into the field of my record - Called Endor (memo)- I will have many text s say upto 50-60 but when I insert these into endor field I will probable only use say 5 or 6 at any one time on the record line so an example follows
line 45 in endor I wish to insert wordingnme "A" and then Wordingnme "B" I also will do some free form type within this - any idea's :eek:
Probably a really simple question, but is causing me problems! I need to be able to limit the amount of characters that can be entered into a field. For text fields I can just enter the relevant field size, but can not find an equivalent for a memo field. Validation rule warns you that there are to many characters, but doesn't seem to actually limit you.
I have a field on an Access db, this is a "Memo " type field which has many lines of text within it.
I need to run a query on this to get the last line of text within this field.
Aside from records where this memo field is filled in I also have records where the memo field is blank. So basically if the memo field is blank I want a blank field returned as well as fields with data.
I am using Access 2003 but also am running this on Access 2000 (not sure if there has been a change to function names)
This is seriously bugging me - can anyone put me out of my misery?
This is what is happening. I have created a data base that has a field that is set to be a memo field however when i linked that field to a form for entry it limits it to the 255 max characters for that the text field would have. has anyone ever come accross this problem and if so how do i over come it without starting over because the project is almost done.
I have been searching and searching and cannot find any info on this specific problem.
I have a subform that users go into and enter data into the fields. Intermittenly, when a user closes out and then goes back in, the data in one of the fields (always the same field) is missing and has been replaced with ########.
Any insight or advice would be greatly appreciated!!
I'm trying to save the contents of a text box into a memo field in a table, but after my code runs i look in the field and it is cut off after a hundred characters or so, and the last few characters are garbled. This is the code:
Code: DoCmd.RunSQL "UPDATE orderheaders SET orderheaders.Comments = [Text127] WHERE orderheaders.OrderNumber = " & GlOrderNumber & ""
Hi I'm new to forum and can't find an answer to this problem. I am using Access 2002 and have a memo field in a form that I want people to be able to type in as much text as they want. This is then displayed in a report. The form accepts the text with no problems however when I view it in the report it has been cut to 255 characters as if it is a text box. I have set the properties to 'can grow' to no avail. I have searched the MS Knowledge base for a solution with no luck. I admit I'm not an expert in Access and would really appreciate some help as I have been trying to overcome this problem for days.
The database contains the records of a collection of thousands of photographs and negatives.
One of the fields contains information on the subject matter of each pic and can sometimes be very long. The field was changed from text to memo so as to hold more characters but they appeared in one long string, which means a lot of scrolling to see the information. That has been changed back to text and we are adding a second or third record such as xxx-xxx-xxx cont1 xxx-xxx-xxx cont2 so as to get shorter strings. Is there a way to make the text wrap onto a second or third line automatically after a specific number of characters have been entered or can a carriage return be put in to force the text to a new line?
I am having trouble creating a specifically formatted report.
Anyway, I have two fields: [Title] (plain text) and [Description] (memo). I want to combine the two but have the Title bold underlined but not the Description. I want it to look like this:
This is the Title. And this is the decription part that could go on for many, many more lines...
I have tried combining the two fields like: =[Title] & [Description] but if I set the properly to underline, then the whole thing is underlined.
Since the Title will vary in length, I cannot just underline the Title and then put the Description field next to it.
I want to create an app that works like Wikipedia. for example any word that have an explain and that's explain available in my database that word become hyperlink text with different color and so if operator click on that word open a new form and show the explain.
I am in the process of changing over a text field to a memo field to generate more space (in 5 different databases :eek: ) Thanks to all the good info on several searches of this forum, I am pretty clear on how to do that.
The question is... when I convert a field that already has information in it, will I lose the current information?
I have a report based on a query. There is a field "comments" that is a memo type however on the report it does not display all of the text. I have the property "Can Grow" set to "yes" however it still only shows partial text. Any ideas? thanks in advance!
I use a memo field in a form. This memo field is used to store "steps" for doing something.
To keep things neat, I use ENTER between the steps so there is a blank line between each. This looks good in the form, however... I export this information (from the table) to a CSV/text file to use online. My online script requires that each record occupy only one line. But, the exported file has separated the "steps" into multiple lines just as it appears on the form.
I would like to use the HTML tag <BR> to separate the line feeds in the CSV file. I can enter these in the FORM instead of pressing ENTER, but then the form looks bad - harder to read.
I have a report which when I open it by clicking the button in the form shows what looks like Chinese text in the memo field. To open the report the following is in the event properties for the referencing button
Code: Private Sub cmdPrintSumReg_Click() Dim strWhere As String If Me.Dirty Then 'Save any edits. Me.Dirty = False
[Code] ...
When I open the same report from the reports menu on the left of the database it is just fine. But obviously it is showing information for all contracts and not the any one contract.
I haven't changed anything in the table that contains the memo field and this only started happening yesterday afternoon after using this db for over a year.
I found an earlier post in this forum with a similar problem but the only difference I see is that the user changed the field from a text to a memo. I haven't.
