I have couple of forms where...
The users enters a name of the river where he/she was fishing in, I also have an option where the user can browse for previous entered rivers.
I am wondering how this works, how do I let the information entered go automatically into the browse section and how can I prevent from duplicates will appear in the browse for previous entered rivers.
thanx
p.s is this something that I will work with in the table it self or can I change this in the form ???
I am in the process of (attempting) to develop a database and application for Parking & Violation Management. I have two tables at this point: "Parking Registration" and "Violations" that are linked by a "Permit #". I have developed a form that will allow the officer to enter either the "Permit" or the "Licence Plate" of a vehicle to run a "Vehicle Check" query to produce specific information for the vehicle in question; which is what I wanted, kind of... The problem is that the resulting data pops up in "table" format, and contains multiple fields, making review of the data difficult due to its lengthy, linear nature. Is there a way to have those results appear in text boxes either on a separate form or the "Vehicle Check" form itself?
When entering information into a blank form, I would like to be able to continue entering information to another additional blank form after my last entry. Is there a way to continue to a blank form after entering information into the previous blank form? I would just like to continue without having to close the entire form and then reopening another form.
I'm not a complete Access beginner, but I'm also far from an expert and not much of a programmer. So I feel that there's a chance this might be a relatively simple issue I'm merely making more complicated than it should be. But hopefully someone can at least point me in the right direction. (For the record, I'm using Access 2007.)
I've created a form to which I've added three tabbed pages. Each of these pages contains a subform the user can use to enter data into three different tables. The tables' relationships look to be set up properly, and there doesn't seem to be a problem with typing the information into the subforms. However, I want a single button press to update the information across all the tables and clear all the fields in the subforms so that the user can then go about entering the next person. I can't seem to figure out how to do this.
I downloaded a number of template databases from Microsoft, and some of them have exactly the kind of functionality I'm looking for: a "Save and New" button that inputs all the data across the tabbed pages and then lets the user start over from scratch with blank forms. I've spent a fair amount of time studying the various forms in the Student template, but I'm having absolutely no luck replicating that functionality. I basically want everything to work almost exactly the same as that, except with different field and table names (of course).
Can someone please explain what I'm doing wrong and how I might fix things, or at the very least how to look at the Students template database to get the information I need on how to do this myself? I'd be very grateful for any help on this matter. Thanks.
I apologize if this has probably been asked countless times; however, in my search of this forum I could not find something that seemed to work for something so simple.
I have 2 forms. The first form is my main form and the second form is my "popup" form. Both of these forms access the same table. In my main form I have it so people can not enter in a ID so it reduces accidental data entry. Therefore, I created a "popup" box that allows ID entry.
Everything works great except when I close out of the popup form, the newly entered data is not available unless I close the main form and reopen.
Million Dollar Question:
How do I refresh or requery (dunno the correct term usage here) the main form to reflect the addition I made in my popup form. I would like the refresh event to happen when I click the close button on my popup form.
Purchase Order with main details on (Po Number, Supplier etc) with a sub form carrying the line items to be ordered.
Table PO Form PO Table POSUB Form POSUB
When entering main order details into Form PO, why do the fields in the related table(Table PO) immediately get populated when the the focus gets transfered to the sub-form (Form POSUB). with users quiting the database illegally (not by the cancel records button) the result is unwanted records in the Table PO.
What I want to do is complete the input fields in the main and sub forms without any records being commited to the tables until the "Save Record" button is pressed.
I've been working on a database (attached) for a health trust. I think the relationships are right but I'm having a problem entering data. The subform shows the correct data but I can't figure out how to enter data using a form.
Can someone point me to a tutorial - I have searched the forums - honest!!
I've designed a form to enter several items at the same time, eg, I want to enter aeveral company names on one form. The trouble is that when I enter data into one box, it appears in all the other boxes with the same field names, not allowing multiple data, is there a way around this?
I am new to VBA, and i need some help in my system..... basically i am creating a appointments Form, and in this i have some txt fields and a listbox which contains the available times ... What i want my form to do is that as the user enters the values in the form and the time selected, as clicking the "set Appointment" button it should add the values to the table.
I have included a word document of my form: Just as some help... Could you guyz help me with the coding... I am not at all good at coding! Thanx alot guys.. I really appreciate your help!!
Hey, basically, i have an invoice form, and on this I need to add InvoiceDate to it. Now, on the form, I have =Date(), but this changes every time i open the form, so it dosnt actually record the date. I have to manually type the date in to the form, which is not very good usibility practice. Can anyone help? Ive tried searchin, but I couldnt fin much relevent stuff. CHeers Alex
I have set up a form for the user to fill in a new record and used a command button for it to save. This all works ok.
The problem I have is when the form is opened, a record is shown in each of the fields as opposed to a blank one. The user can still enter data but they need to delete the stuff that is already in the box.
The user then, will have to press the little star at the bottom.
I have tried going into to design view, and typing in "Unbound" but it came up with #name? ...
After informations is entered and a button is clicked to submit the information I can use the back/up arrows and page up to see what was entered even though the form is cleared. Is there something in the properties of the button that is clicked to submit that will make it impossible to see the prior users data.
It is personal information that people do not want others to see but is a public sign in computer.
I just can’t figure out how to enter the code into the forms module. I’m not real good with VBA – would I enter this code as some type of event procedure or should I just open up the code editor and insert it some way from there? Thanks for any help.
I am about to put my head through a wall. Perhaps you can help (not with the head through the wall - I can do that on my own). I have an ASP form that updates an Access database. Everything works except for one line of code. This one line is a concatenation statement that assembles month+day+year and updates a date field in the database. I know Access is particular about its date formatting, but I thought I had it right. Can someone help? This is the line of code:
It should result in my date in #MM/DD/YYYY# format. I have tried all kinds of combinations of formatting and can't come up with the right one. I get the same "Type mismatch" error every time. I would love it if someone could shed some light on this one.
I'm very new to Access and this may be a REALLY simple question but ...
I have an Access 2000 db on a web-based server and a website form that inserts a record. Everything works properly but I now need to insert the date each time a record is entered. These records will not change or be updated once entered. I think there must be a way to have a hidden field in the web form which submits = Date() or whatever the right code would be.
The field I'm sending the date to is called "dateOfEntry" . Hope someone can help. Thanks in advance.
I've created simple data base with 2 connected table with relationship one to many, then I have built the querry based on those 2 table and then I have done the form based on this querry, so there are fields from those 2 tables in the form.
When I try to fill in the fields with information I get error message:
"You can not add record (records); missing foreign key in the table"
When I checked relationship property window everything seems to be ok.
I have a form into which I scan a serial number in one of its text boxes, I can then select search and am presented with a report relating to that serial number. All simple so far. Now for the dilemma... The barcode I scan consists of 15 characters like so, 53423PP98765432, numbers-PP-numbers.. the problem I have is that I only need the numbers after the PP's, in other words the last 8 digits. My question is, is there something I could do to make the text box omit the first 7 characters automatically, leaving me with the 8 I need, instead of me having to curser into the middle and manually delete the first 7 characters. I only need the last 8 because of the link with another database that only uses the last 8 digits.
Also, on the device I scan, there are 2 other barcodes, above and below the one I need to scan. If I scan one of the others by mistake, I have to highlight and delete the results to try and scan the middle barcode. The other barcodes also have a different length to the one I need. So is it possible to write some code that says, ok, you have scanned a barcode with 10 or 12 digits, we don't want either of those, so deletes it for me to try again, but then recognizes the 15 digit barcode and auto deletes the first 7 characters as mentioned above.
I have a form for entering Retirement Plan information (frmRRSP) that has tblRRSP as its recordsource. The RRSP Rate is a field with a Number datatype (in the table) and a Percent format on the form. When I enter a value on the form it originally displays the value I enter, until I press the Enter key, then it changes to "####" an enters a value of 0 in the table field.I tried entering a value directly in the table and it changes to 0 when I press Enter.I have an almost identical form and table for Vacation and it does the same thing.
I want to save the changes to [form 1] before [Replacement Unit] opens. What and where do I enter code? Sorry, only just started to learn VB. (Using Acc97). Any help would be great! :)
Is it possible in Access to create one input form that includes fields from different tables.
I want to create a single form that dispenses input fields to separate tables, I don't see anything to make this happen. I know you can retrieve data from separate tables utilizing querys. But is it possible to input data into a single form to multiple tables ?
Hey there, Im currently making a form so users can enter project information. For this particular project, the user must choose from a variety of options, and each option has a number value assigned to it for a rating. Now at the end of this form, I want a sum of the ratings, and then entered into the table. I am using a text box for the sum of ratings, and can get the sum of ratings to work on the form, but this data is entered as a 0 in the table. If anyone could help me find a way to put the actual sum in the table, that would be excellent.. thx a lot.
If it would be any help, here are the names of text boxes that I'm adding:
Health and Safety Rating, Maintenance Rating, Equipment Rating, School Size Rating, Student Enrollment Rating, SD Priority Rating, Project Requested Previously Rating
I apologies for this sinmple quesiotn to some of oyu, but being fairly new with Access, Im having problems when I update my form and then print our a querie, to obtain certain information, the new data is missing.
HOw can I make sure that my querie gets updated when I update my form.
I have made a table and I enter data in that table through a form. The form also include two sybchronized comboboxes. When I select a category in one combo box, corresponding items are selected in second combo box. The problem is that when I select the category in the form (with ID+Category Name), it stores only the ID in the table. How can I see the Category Name in the table (which is the control source of the form) instead of ID?
In the code in this tutorial shown here [URL] It says to create RentalRates with no Navigation Buttons. Then after creating the form, that has no navigation buttons, I am to create 8 records in the next step. I assume it means to create the 8 records using the form RentalRates.
Now that is confusing. Do they enter the records using the newly created RentalRecords form or enter the records on the Table Categories; which is the RentalRecords form's record source?
Now I know of one way to enter the records which is to put Navigation Buttons to yes, enter the records and then put Navigation Buttons back to no. I do not think that is what they mean. What do they mean?
