Can anyone provide assistance with the above error? It comes up when I try to open a report from my form. The form has 15 tabs and approximately 5 subforms on each tab, which I suspect is causing the problem.
I have found some help on the web, but I am not sure how to use it... http://www.mvps.org/access/bugs/bugs0010.htm ...Item number one describes my situation exactly, but I don't know where to set the "record source on click" for each tab. Any help would be greatly appreciated.
I'm running into a Run time error 3014 Cannot Open Any More Tables
I have a report in Access and I am using the below VBA to save the file by the content of the "File" column in the DOC_AP_MASTER table. It works wonderfully for about 60-120 (it ranges and I don't know why) but then I get the lovely error above.
My report closes after each save... what tables am I opening without knowing?
Dim db As DAO.Database Dim rs As DAO.Recordset Dim MyFileName As String Dim mypath As String Dim temp As String mypath = "C:Testing"
Can someone please help me with this run time error I am getting:
"Cannot open any more tables".
We have 2 big forms in our application. One has 6 tabs on it with many datasheets. This form works for a while when entering data. Then about a half-hour into the application, the drop down lists are blank for new data and the "cannot open any more tables" error occurs.
I have cut down the number of tabs from 8 to 6, and decreased the datasheets by 4.
The mdb went from 14 Megs to 9 Megs with some cleanup of obsolete VBA code and redundant GUI elements. I compacted and repaired the database using the menu Tools.
It helped some, but I still get this pesky error. Then the application is useless because there is no more data you can enter.
Is there anything I can do? Any suggestions or a Microsoft web site link someone can share?
When I recently opened a Db I had been working on I received the attached Msg. The path to the Db is C:Database ProjectsAEMSWarranties and Sales.mdb Once OK is pressed the Db works fine.
I created a new Db and imported all objects, but no change.
On one of my PC's at home I thought I would give Office 2007 a go. It ran so slow and bogged down that I un-installed it and re-installed Office XP
Now when opening a db with an image the attached error message appears. The Db opened OK previously, and works on my other PC's, so I presume it is an office installation error.
hi i get the error "The database is already opened exclisively by another user" after running the following code. i ran the same code under the same conditions on my home pc and it worked fine.
Private Sub Command1_Click()
Dim dbs As Database Dim qdf As QueryDef Dim strSQL As String
Set dbs = CurrentDb strSQL = "update Emp set Salary = 786+ val(text2)- val(text3) where EmpID = '& val(text1) &'" Set qdf = dbs.CreateQueryDef("", strSQL)
Hi all, I have a form with a button on it, that when clicked it will open a subform on the same form. But, when I clicked this button, it gave me this error message:
The expression On Click you entered as the event property setting produced the following error: A problem occurred while [Database Name] was communicating with the OLE server or ActiveX Control
For more details on this error message, see the attached file.
Hi can anyone help me, im struggling to get my database connected to my site, it is connected to dreamweaver through ODBC but will not open, the problem i believe is in the lines of cole in bold. Any help would be much appreciated.
<LI>Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80004005) [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x814 Thread 0xa7c DBC 0x1191024 Jet'. /Project_Wortons/Registration.asp, line 16 Thanks
I'm begin study Microsoft Access but have error and don't know how! (Please see the attach picture)
I'm use Window XP Pro and Office 2003.
I'm already update window and Jet 4.0 Service Pack 8 (SP8) for Windows XP at link but nothing to change (http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-d7f70a153156&DisplayLang=en)
I got this message after I install the "SMTPSVG.DLL" that i got from http://www.serverobjects.com/comp/Aspmail3.htm What should I do?
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x8d8 Thread 0x994 DBC 0x240303c Jet'.
Please help. When trying to launch MS Access 2000 I get an error: " Can't find the database you specified, or you didn't specify a database at all. Specify a valid database name in the command line, and include a path if necessary." When I try to open a valid Access file, the application simply doesn't display anything.Please help to fix the problem. Thanks
Hi, I am not able to open database in access2003 because of error 3197. Everytime when trying to open ,the same message appears on the screen:
"The Microsoft Jet engine database stopped the process because you and another person are attempting to change the same data at the same time".
I have tried to import that file in the new database,but that doesn't work. Even when my copy the database on other machine, same error message come up. Some one suggested it might have to do with enabling the database for multiuser access but i can't even open the database.
Does anyone know how to open the database with error 3197?
This is the second database where this has happened to me. I have code to print a report (with several sub-reports) to PDF. When it prints, only the first couple reports appear. The rest of the pages on the PDF are blank. If I try manually saving to PDF (Save As > PDF or XPS), I get the error "Cannot open any more databases."
In the other case, my "solution" was to copy all the queries into temporary tables and use the temp tables as the datasources for the reports.
I have developed a Microsoft Access 2010 database for my client and the database is split with Front-end/Back-end, the Back-end and the database is shared on Network, The client operating system and applications for all users are hosted and consistent and the service is delivered over Citrix.
The database some times corrupt the tables record and give a permanent #Delete Error, I have attached one of the database table and the screenshot of the error,
the following error message appears when trying to access my database. I can't seem to get into it at all, not even by trying to import the data tables over into a new database. the following message appears:
"The database has been converted from a prior version of Microsoft Access by using the DAO Compact Database method instead of Convert Database Command on the Tools Menu. This has left the database in a partially converted state. If you have a copy of the original format use the convert Database on the Tools menu to convert it. If the original database is no longer available, create a new database and import your tables and queries to preserve your data. Your other database applications can't be recorded''..
the copy and the back up wont let me in either, this just suddenly happened.
I have a 2003 .mdb file and the associated Workgroup Information File which normally resides on a network in a folder V:V-Base-DatabaseDATA. I have the Workgroup Information File.
The database is unsupported and we need to migrate the data to a new web based database.
When I try to open the database with the shift key down I get the following message :
You do not have the necessary permission to use the V:V-Base-DatabaseDATAV-Basebe.mdb object.
What is the best way to access the data and do I need to do this on the server instead of a local drive off site?
Whenever I open the form 'TrainingF' I get the 'Enter Parameter Value' msg box. I tried to look online but could not get rid of it. I have attached the file.
Now he can get into the SFTP folder, but when he uses the shortcut, he gets an error stating Microsoft Access couldn't find the file ServerName.ACCT05.us.companyabbreviation.comSha reNameSFTPSFTPWorkgroup.mdw 1" "C:SFTP Database V2.1 FESFTP Database V2.1 FE.mdb" (Note the space and 1)
I created a new shortcut, and I was able to open the db using his target line, even though I can use the shorter one. For the new user, this still generates an error.
I linked table rawdata from a database called competitor from a ODBC Database. I run a query with to make a table with a criteria where it retrieves roughly 10 columns with 719,000 rows. And it gives me this error.
(Cannot open database". It may not be a database that your application recognizes, or the file may be corrupt.
I asked the creator of the database and they said the database grows automatically and it was created with the same Access version as i am using to run the query.
Also when I do a RUN without creating a table and just selecting and displaying the data it does not give me any issues.
Anyhoo....I've been trying to study for MOUS Certification in Access 2000. I was going to do a bit of playing around with some practice files today, however an error occured. I could open the database with no problem, but when I went to open a table, I got an error message that simply said "Unknown" and had the OK button below that. This happens on any database that I open.
I was going to go to the Fix & Repair option that is in Access, but it was prompting me for the disks, which are at my sister's house somewhere.* I also did a search in Microsoft's website/support center and found something for the same issue in Access 2002. That was to register a DLL file by running this: regsvr32.exe C:WINDOWSsystem32msjtes40.dll. That got me another error: LoadLibrary (C:WINDOWSsystem32msjtes40.dll") failed. GetLastError returns 0x00000485. Of course, searching on that error code got me nowhere fast.
So, if there's any kind souls out there that have suggestions for me, I'd greatly appreciate it.
Thanks!
*I've borrowed this computer from my sister. It's an old winME beast that I've named Demon Spawn because I have been fighting it from the getgo. It took 4 hours to get it to recognize there's a monitor attached and a month & a half to get Internet Explorer to even run. I still think the best thing for this machine is to take it out to an abandoned field and put a bullet in the CPU.
I have never some across this before but my database keeps throwing a "Too many tables open error" which has taken me a day to get to the bottom of. I believe that the use of a dlookup in one of the queries not cleaning up after itself.
The issue I have now is that even importing the tables into a new database causes this problem as i guess I'm inheriting the same table id issue.
Does anyone know how to clear the table IDs that the dlookup left open ?
Secondly, could anyone suggest a more robust method of looking up one value from another table. Basically I need to look up the USD to GBP rate (one value) for every record in an other table. I cant use a join (trade ccy->fxrate ccy)as there is properties to link on. Ive tried the elookup function I found on the net but performance is still an issue.
I have a db that runs call stats (Master) this exports to several Department (Slave) Databses. The Slave db's can be accessed by any of number of Managers.
My problems (Amongst others!) is that I run the master every 15 mins and the slaves are linked to the master tables. How can I set this up so that these slaves can be updated whilst they are logged into?
I have 2 tables, Test Cases, Test Case Details. I have a tabbed form to display the data. How do I open the form and retreive the data from both tables? Tables are related by ID.
I have a query that lists all tables within my access database.what i want it to be able to click the table name from the query list.for example my query list is:
Rawdata Outcomes Reporter Tracker
how would I click on Tracker and open in up the tracker table? is it something like