Error 3075

Jun 9, 2005

Ok, tried realy allot, anybody can help find what is wrong with this code?
[Klantnummer] is a listbox on my form with all the customer numbers in it. in my table it is saved as text.
Thanks


Private Sub Klantnummer_Change()
Dim db As DAO.Database
Dim rs As DAO.Recordset

Dim strSQL As String
Dim strNaam As String
Dim strContact As String
Dim strAdres As String
Dim strPost As String
Dim strPlaats As String
Dim strLand As String
Dim strTel As String
Dim strFax As String
Dim strMail As String
Dim strCris As String
Dim strContactCris As String
Dim bActief As Boolean
Dim strGsm As String

strSQL = "SELECT tblKlanten.Klantnummer, tblKlanten.Klantnaam, tblKlanten.Contactpersoon, tblKlanten.Adres, tblKlanten.Postcode, tblKlanten.Plaatsnaam, tblKlanten.Land, tblKlanten.Tel, tblKlanten.Fax, tblKlanten.email, tblKlanten.Crissisnummer, tblKlanten.Contactpersoon_crissis, tblKlanten.Actief, tblKlanten.GSM" & _
"FROM tblKlanten " & _
"WHERE (tblKlanten.Klantnummer = '" & [Klantnummer] & "');"
Set db = CurrentDb

Set rs = db.OpenRecordset(strSQL, dbOpenForwardOnly)
Do Until rs.EOF

strNaam = rs!Klantnaam
strContact = rs!Contactpersoon
strAdres = rs!Adres
strPost = rs!Postcode
strPlaats = rs!Plaatsnaam
strLand = rs!Land
strTel = rs!Tel
strFax = rs!Fax
strMail = rs!email
strCris = rs!Crissisnummer
strContactCris = rs!Contactpersoon_crissis
bActief = rs!Actief
strGsm = rs!GSM
rs.MoveNext
Loop

rs.Close
Set rs = Nothing
Set db = Nothing

MsgBox strContact & strNaam & strAdres & strPost & strPlaats & strLand & strTel & strFax & strMail & strCris & strContactCris & bActief & strGsm
End Sub

View Replies


ADVERTISEMENT

Run-time Error '3075'

Jun 19, 2007

I have created a form which takes a user-prompted date range and outputs a list of appointments for that date. For some reason when I enter the start date of 11/21/1900 and an end date of 11/21/2000 I am getting the following error:

"Run-time error '3075':
Syntax error (missing operator) in query expression '(HBC
1 Month Between #11/21/1900# And #11/21/2000#)'"

The code is seen below. Could anybody shed any light on this? Thanks.

Private Sub Command4_Click()
Dim strReport As String 'Name of report to open.
Dim strField As String 'Name of your date field.
Dim strWhere As String 'Where condition for OpenReport.
Const conDateFormat = "#mm/dd/yyyy#"

strReport = "HBC 1 Month Visits"
strField = "HBC 1 Month"

If IsNull(Me.txtStartDate) Then
If Not IsNull(Me.txtEndDate) Then 'End date, but no start.
strWhere = strField & " <= " & Format(Me.txtEndDate, conDateFormat)
End If
Else
If IsNull(Me.txtEndDate) Then 'Start date, but no End.
strWhere = strField & " >= " & Format(Me.txtStartDate, conDateFormat)
Else 'Both start and end dates.
strWhere = strField & " Between " & Format(Me.txtStartDate, conDateFormat) _
& " And " & Format(Me.txtEndDate, conDateFormat)
End If
End If

' Debug.Print strWhere 'For debugging purposes only.
DoCmd.OpenReport strReport, acViewPreview, , strWhere
End Sub

View 1 Replies View Related

General :: Access Update SQL Run Time Error 3075

Aug 16, 2012

What's wrong with my zSQL string? I am working on it for 2 days and got no where. I want to put a IF statement

(=IF('Report - key'!$B$7="ALL","ALL",'2012 data'!B2))

to a ACCESS Text field using SQL Update. Here is my code:

Dim zSQL As String
Dim zmsg As String
Dim DQ As String

DQ = """"

zSQL = "UPDATE Supplier_Meeting_Planning SET [ID3] = ' " & "=IF(" & "'" & "Report - key" & "'" & "!$B$7=" & DQ & "ALL" & DQ & "," & DQ & "ALL" & DQ & "," & "'" & "2012 data" & "'" & "!B2)"
Debug.Print zSQL
DoCmd.RunSQL zSQL

It is very painful to put ' and " in the string.

View 7 Replies View Related

General :: 3075 Error When Using Rich Text Highlighting

Jul 29, 2013

My error: Syntax error (Missing operator) in query expression

Followed by <div> and other HTML code. Ending with a "3075".

I get this error after adding highlighted text to my memo fields. No other rich text formatting seems to trigger it. Specifically, the error is triggered when moving from my subform to another subform or the main form.

View 2 Replies View Related

Error Message '3075' Missing Operator In Query Expression

Dec 3, 2007

Sub PickRandom()
Dim db As DAO.Database
Dim tdf As DAO.TableDef
Dim fld As DAO.Field
Dim rst As DAO.Recordset
Dim strSQL As String
Dim strTableName As String

' 1: Create a new temporary table containing the required fields
strSQL = "SELECT tblWoodrow Odom.ReviewTopic,tblWoodrow Odom.TeamMember1, tblWoodrow Odom.TeamMember2, tblWoodrow Odom.TeamMember3, tblWoodrow Odom.TeamMember 4" & _
"INTO tblTemp " & _
"FROM tblWoodrow Odom;"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL (HERE I RECEIVE AN ERROR MESSAGE. WHAT I NEED TO DO HERE SO IT CAN RUN PROPERLY? ) DO I NEED TO DO A QUERY STRQSQL STATEMENT?)
DoCmd.SetWarnings True

' 2: Add a new field to the new table
Set db = CurrentDb()
Set tdf = db.TableDefs("tblTemp")
Set fld = tdf.CreateField("RandomNumber", dbSingle)
tdf.Fields.Append fld

' 3: Place a random number in the new field for each record
Set rst = db.OpenRecordset("tblTemp", dbOpenTable)
rst.MoveFirst
Do
Randomize
rst.Edit
rst![RandomNumber] = Rnd()
rst.Update
rst.MoveNext
Loop Until rst.EOF
rst.Close
Set rst = Nothing

' 4: Sort the data by the random number and move the top 25 into a new table
strTableName = "tblRandom_" & Format(Date, "ddmmmyyyy")
strSQL = "SELECT TOP 25 tblWoodrow Odom.ReviewTopic,tblWoodrow Odom.TeamMember1, tblWoodrow Odom.TeamMember2, tblWoodrow Odom.TeamMember3, tblWoodrow Odom.TeamMember 4" & _
"INTO " & strTableName & " " & _
"FROM tblTemp " & _
"ORDER BY tblTemp.RandomNumber;"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True

' 5: Delete the temporary table
db.TableDefs.Delete ("tblTemp")
End Sub

View 2 Replies View Related

Modules & VBA :: Limit Down Report - Keep Getting Runtime Error 3075 Missing Operator

Feb 13, 2015

I have a report I am trying to limit down. I keep getting this error.

Code:

Run-time error '3075':
Syntax error (missing operator) in query expression ' and (Exercise = Barbell Squat)'.

Here is some of my code. What am I missing?

Dim whereCond As String
Forms!frmReports!cmdExercise.SetFocus
Exercise = Forms!frmReports!cmdExercise.Text
Forms!frmReports!cmdCategory.SetFocus
Category = Forms!frmReports!cmdCategory.Text

[Code] ....

View 3 Replies View Related

Microsoft JET Database Engine Error '80004005' Unspecified Error

Jan 28, 2004

Hi,

Im new to asp and access and have been having this problem for serveral weeks.

Every couple of days, all the asp pages on my site that communicate with the database start having 500 internal errors. i turned off the "Show friendly error messages" and one page gave me this specific error:

Microsoft JET Database Engine error '80004005'

Unspecified error

/admin/submitlogin.asp, line 8

I have tried a million things and have no idea why this is happening. Im not sure what other information i should post in order to see the problem. Any help would be greatly appreciated. Thank you,

Patrick

View 3 Replies View Related

General :: Disk Or Network Error With Error Code 3043

Jul 13, 2012

How I can get rid of Disk or network error with error code 3043? What this error indicates.

View 4 Replies View Related

Simple Error Trapping By Error Code

Dec 6, 2005

hi all

i have the following peice of code ...


Private Sub NextApplication_Click()
On Error GoTo Err_NextApplication_Click
DoCmd.GoToRecord , , acNext

Exit_NextApplication_Click:
Exit Sub

Err_NextApplication_Click:
If Err.Number = 2105 Then
MsgBox "Cannot navigate to the next record. This is the last record."
Else
MsgBox Err.Description
End If

Resume Exit_NextApplication_Click

End Sub


but even when this error occurs nothing is being properly handled the way i specified - any ideas ?

View 3 Replies View Related

Reserved Error (-1517); There Is No Message For This Error.

Mar 31, 2006

Does anybody know what this error message refers to?

"Reserved Error (-1517); there is no message for this error."

It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.

the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)

The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.

If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.


-Thanks, Sean

View 10 Replies View Related

Error 3341 Or Error 3022; Do Or Don't, I'm Damned.

Aug 3, 2006

Okay, I'm kind of stumped here.I have a subform that has a button that sends a user to a "sibling" subform on another tab page, pass some information to ensure they are adding more details to the same records rather than creating two separate record.First time I programmed it, I got an error 3022 (keys cannot have duplicate values). I checked the query of the sibling subform and saw that the ID is from the one side table. I changed it so many table's foreign key is used. Second try, I got an error 3341 (there isn't a matching key in one side table).After some thinking, it also occured to me that I had set the query this way to allow addition of new record which wouldn't be possible if I had the query pulling the many side key, not the one side key.How do I get the subform to accept the ID that is being passed and create a new record using that ID?:confused:

View 5 Replies View Related

Modules & VBA :: Why On Error Is Skipping Next Error In Sequence

Sep 1, 2014

Code:

Private Sub Consolidate_Click()
Dim temp As Variant
Excel.Application.Visible = True
temp = Dir(CurrentProject.Path & "Inputs")
Do While temp <> vbNullString

[Code] ....

From the second iteration its not picking the error.

View 5 Replies View Related

Error Handling - Enough To Put In On Error Event

Sep 24, 2005

Every form has an on error property.

Is it enough for error handling to code the on error property for each form?
With enough I mean error handling which lets you resume the program.

Ontherwise I have to code (or call a procedure) for each coded event which i wouldn't prefer

For instance now I'm putting error handling in each event but would consider it more efficient if it can be placed once in each form
Private Sub cmdReport_Click()
On Error GoTo Err_cmdReport_Click

Dim stDocName As String

stDocName = "rptOfme"
DoCmd.OpenReport stDocName, acPreview

Exit_cmdReport_Click:
Exit Sub

Err_cmdReport_Click:
MsgBox Err.Description
Resume Exit_cmdReport_Click

End Sub

View 3 Replies View Related

Error Message With No Error Number

Feb 1, 2006

Hello All,

I have been developing my database all one seems to be well exept for an error message which is attched.

If anybody can help me trap this error or offer some advice i would be greatfull.

Alastair

View 6 Replies View Related

SQL ERROR - Runtime Error 3061 -

Aug 5, 2005

SQL Issue ...

ERROR: Runtime error 3061 - Too few parameters. Expected 1.

------------------------------------------------------------------------

Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " '
* ROLL * & ' " & " ) AND .... )

sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"

ANY HELP WOULD BE APPRECIATED ...

Cheers,
QTNM

View 14 Replies View Related

(Error 3022)The Changes You.... Error In Subform

Dec 18, 2006

hi guys i was wondering if you can help me this is my code: i have a main form with this code, this form contains a subform linked by the All_PricingID

Set rst = CurrentDb.OpenRecordset("tblAll_Pricing") 'main table
' adding data to the table
rst.AddNew
' Main table
rst!All_PricingID = Me.txtPricingID 'Main table pk
rst!MainContract_ID = Me.cmbMainContract 'combo box in parent form
rst!ItemNumber = Me.txtItem 'Main form text
rst.Update

'sub Table
Set rst2 = CurrentDb.OpenRecordset("tblPricing") 'sub table
For varItem = 0 To Me.lstsubContracts.ListCount - 1 'this is a list in the main form
'--- loop through all the items in the list box and create a new row in the subform for each subcontract in the listbox lstSubcontracts.
rst2.AddNew
rst2!ID = Me.All_PricingID 'sub table foreign key
rst2!SubContractID = Me.lstsubContracts.Column(0, varItem) 'sub table
rst2.Update
Next varItem
'--- close the tables
rst.Close
rst2.Close
Set rst = Nothing
Set rst2 = Nothing


the subform appears correctly with the rows i wanted added but i need the user to be able to edit a column in the subform for the rows just created (my form is on datasheet view). but everytime i move to cursor into the subform, i can't even scroll up and down.

i keep getting an error that says :

The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. (Error 3022)


but when i check my tables tblAll_Pricing and tblPricing , everything is inserted correctly according to my recorset above, do you know why this is happening? and why i am not able to edit my subform. my subform allowsedits and additions.


help!!

View 2 Replies View Related

Error 2465 Application Defined Or Object Defined Error.

Nov 17, 2006

hi,
I am new to this forum and to MS Acess. i am not a software engineer or in the field of software. I had to learn as much as i could about MS Acess because of a project i worked on. I have a standalone MSacess database and one of the forms is giving me trouble when I try to enter a new record

The form is called frm_fragrances and has information about a fragrance.
the frm_fragrances has 4 fields in it and a sub form. the sub form has details about the fragrance

In a new record when I enter the 4 fields and attemt to go to the subform which has details about this fragrance I face this error.

an unexpected error haas occurred @2465: application defined or object defined error.

additional information
Active form:<frm_fragrances>
Active control:<txt_VendorName>
Previous control:<frm_fragrances>@Please call the developer for further instructions



I have looked in the FAQ and on this forum for help on error 2465 and cannot find anything to help me. I can work with forms to an extent but cannot write too much code.

I would really appreciate some help in this matter
Thank you

View 4 Replies View Related

Error #error In MS Access???

Dec 31, 2005

I'm from Vietnam and my English is bad. In my database, I have only a table named tblEmployees, which contains these following fields: Employee_ID (data type: text), Name (text), Salary (number) and Allowance (number). I build a form bound to this table. In the footer of this form, I have a textbox control named txtSumSalary that contains the expression: =Sum([Salary]). Everythings is OK. But when I build an another textbox named txtSumAllowance that contains the expression: =Sum([Allowancess]) (I misspelled this field intentionally), the result are error #error in both textbox controls. I don't understand why the textbox txtSumAllowance wrong, the textbox txtSumSalary is wrong too. Help me!!! Thanks a lot!

View 4 Replies View Related

Error Message - Error No:6;

Jan 21, 2008

Hi. The following message appears when an append query is run in one of my databases "Error No:6; Description: Overflow". I've never seen it before, can't find it in Help - nor anywhere else on the net. All assistance greatly appreciated!

View 2 Replies View Related

Error 438 On Error-handler!

Oct 25, 2004

I have the following code as error handling in a form that gives me Run-time Error 438 "Object doesnt support this property or method" with "Msgbox..." highlighted...
Code:'Error Handling On Error GoTo cmd_icp_catcode_Click_Err'and later in the code' Exitcmd_icp_catcode_Click_Exit: Exit Sub' Error notificationcmd_icp_catcode_Click_Err: MsgBox "An unexpected error hass occurred." _ & vbCrLf & "Procedure: cmd_icp_save_Click" _ & vbCrLf & "Error Number: " & Err.Number _ & vbCrLf & "Error Descricption:" & Err.Descricption _ , vbCritical, "Error" Resume cmd_icp_catcode_Click_Exit
I can provide any more info that you need... I am just surprised because i have used the same code on several forms before and this has never happened!

thanks a lot!

View 1 Replies View Related

#error

Apr 26, 2005

Hi,

I have a database networked with about 8 users. We have been having a problem recently with a specific table. Occasionally, when a user opens a specific form based on this table the entire form is whitened out. When I open the database there is no major curruption, but then when I check the specific table I always find one record with "#Error" shown in every field. I cannot delete the record (invalid argument), so I compact & repair the database and the bad record changes all fields to "##########". Then I can delete the record and all is fine.

Any thoughts on what can cause this kind of error ?

Thanks

Jackson

View 2 Replies View Related

I'm Getting The Following Error:

Jul 4, 2005

I'm getting the following error when I try to switch to design view. Also I can't close the database: :(
"You can't switch to a different view at this time.
Code was executing when you tried to switch views.
If you are debugging code, you must end the debugging operation before switching views."

View 2 Replies View Related

Why This Error Now?

Jul 28, 2005

Let's say we have a table in which one of the fields is Date. Now let's say we want to create a simple report from that table, but the user has to pick the date interval. So, the report will have to display records only from X date to Y date. We create then a form called Report with 2 fields for the user to input the X date and the Y date to create the interval. Then we make a query from that table, and on the criteria of Date, we put the following expression:

Between [Forms]![Report]![DateX] And [Forms]![Report]![DateY]

Well, that's what I've always done when I want to create a report based on a date interval input by the user and it always worked.

But now I've got a problem. Instead of making a query, I made a crosstab query from the table, to make the report easier to read. And again, on the date criteria I put the same expression, but it won't work on the crosstab query. I always get this error message:

"The Microsoft Jet database engine does not recognize '[Forms]![Report]![DateX]' as a valid field name or expression."

Why does this expression work on a regular query but not on a crosstab query?

Also, any ideas on how to create this report on the date interval provided by the user and using the crosstab query?

View 14 Replies View Related

I Got An SQL Error.

Nov 23, 2005

I have entered the following code below, but when I run it it doesn't work I a get an error:

Public Sub ExportOrderDestination(TableName As String, intNumber As String, YourOrderNumber As String, SalesRep As String, JobNumber As String, Terms As String, inNumber As Integer, valueOrderNumber As String, valueSalesRep As String, valueJobNumber As String, valueTerms As String)
DoCmd.SetWarnings False
Dim strSQL As String
Dim recordSet As Database
Dim strSQLTwo
strSQL = "INSERT INTO [" & TableName & "] ([" & intNumber & "],[" & YourOrderNumber & "],[" & SalesRep & "],[" & JobNumber & "],[" & Terms & "]) VALUES (" & "SELECT invoiceID FROM Invoice-Address WHERE CustomerNumber = " & inNumber & ",'" & valueOrderNumber & "','" & valueSalesRep & "','" & valueJobNumber & "','" & valueTerms & "')"
MsgBox strSQL
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True
End Sub

Any help would be greatly appreciate it.

View 9 Replies View Related

Error Msg

Nov 29, 2005

i just created a audit trail in my DB... however upon update and saving my changes... i get an error msg "13 - Type mismatch"... help pls... thankew in advance...

View 2 Replies View Related

Error

Feb 10, 2006

When I try to import an excel file into my access 2000 database, I get the following error message
"an error occurred when trying to import... the file was not imported

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved