Error 3167
Jun 15, 2007
Hi,
I have this code, it works fine, by deleting the record. But after deleting, when I place the cursor elsewhere, it gives Record is deleted 3167 error. Please help
Record is deleted. (Error 3167)
You referred to a record that you deleted or that another user in a multiuser environment deleted. Move to another record, and then try the operation again.
Private Sub Check12_Click()
'Me![1619IDRequirementDocumentation] = [Forms]![f04RequirementDocument]![tb19IDRequirementDocumentation]
'Me![tb1609IDApplication] = Me![09IDApplication]
'Fix for defect 2: Ramanan Pathmaraj
If (Check12.Value = -1) Then
Dim strSQL As String
Me![1619IDRequirementDocumentation] = [Forms]![f04RequirementDocument]![tb19IDRequirementDocumentation]
Me![tb1609IDApplication] = Me![09IDApplication]
'strSQL = "INSERT INTO t16ImpactedApplication19x09 (1619IDRequirementDocumentation,1609IDApplication)" & _
" VALUES (" & [Forms]![f04RequirementDocument]![tb19IDRequirementDocumentation] & _
"," & Me![09IDApplication] & ");"
'MsgBox (strSQL)
'DoCmd.RunSQL strSQL
ElseIf (Check12.Value = 0) Then
'Dim strSQL As String
Dim conDatabase As ADODB.Connection
Dim numRecordsAffected As Long
Set conDatabase = CurrentProject.Connection
DoCmd.SetWarnings False
strSQL = "DELETE t16ImpactedApplication19x09.*" & _
"FROM t16ImpactedApplication19x09 " & _
"WHERE t16ImpactedApplication19x09.[1619IDRequirementDocumentation]=" & _
Me![tb19IDRequirementDocumentation].Value & _
" and t16ImpactedApplication19x09.[1609IDApplication]=" & _
tb1609IDApplication.Value & " ;"
'MsgBox strSQL
DoCmd.RunSQL strSQL
'conDatabase.Execute strSQL, numRecordsAffected, adExecuteNoRecords
conDatabase.Close
Set conDatabase = Nothing
End If
End Sub
View Replies
ADVERTISEMENT
Feb 16, 2005
Help!! I have a form with a drop down list that is pulling Query names from a table. When I select on of the Query names on the dropdown list it is running the appropriate Query. At least it did until today. Now when I select the Query name from the dropdown list I am gett a Run Time Error 3167 Record is Deleted.
Can anyone tell me what is happening? I have changed nothing in the code. The code is:
After Update DoCmd.OpenQuery Me!OMSQueries
Thanks in advance
View 4 Replies
View Related
Jan 28, 2004
Hi,
Im new to asp and access and have been having this problem for serveral weeks.
Every couple of days, all the asp pages on my site that communicate with the database start having 500 internal errors. i turned off the "Show friendly error messages" and one page gave me this specific error:
Microsoft JET Database Engine error '80004005'
Unspecified error
/admin/submitlogin.asp, line 8
I have tried a million things and have no idea why this is happening. Im not sure what other information i should post in order to see the problem. Any help would be greatly appreciated. Thank you,
Patrick
View 3 Replies
View Related
Jul 13, 2012
How I can get rid of Disk or network error with error code 3043? What this error indicates.
View 4 Replies
View Related
Dec 6, 2005
hi all
i have the following peice of code ...
Private Sub NextApplication_Click()
On Error GoTo Err_NextApplication_Click
DoCmd.GoToRecord , , acNext
Exit_NextApplication_Click:
Exit Sub
Err_NextApplication_Click:
If Err.Number = 2105 Then
MsgBox "Cannot navigate to the next record. This is the last record."
Else
MsgBox Err.Description
End If
Resume Exit_NextApplication_Click
End Sub
but even when this error occurs nothing is being properly handled the way i specified - any ideas ?
View 3 Replies
View Related
Mar 31, 2006
Does anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
-Thanks, Sean
View 10 Replies
View Related
Aug 3, 2006
Okay, I'm kind of stumped here.I have a subform that has a button that sends a user to a "sibling" subform on another tab page, pass some information to ensure they are adding more details to the same records rather than creating two separate record.First time I programmed it, I got an error 3022 (keys cannot have duplicate values). I checked the query of the sibling subform and saw that the ID is from the one side table. I changed it so many table's foreign key is used. Second try, I got an error 3341 (there isn't a matching key in one side table).After some thinking, it also occured to me that I had set the query this way to allow addition of new record which wouldn't be possible if I had the query pulling the many side key, not the one side key.How do I get the subform to accept the ID that is being passed and create a new record using that ID?:confused:
View 5 Replies
View Related
Sep 1, 2014
Code:
Private Sub Consolidate_Click()
Dim temp As Variant
Excel.Application.Visible = True
temp = Dir(CurrentProject.Path & "Inputs")
Do While temp <> vbNullString
[Code] ....
From the second iteration its not picking the error.
View 5 Replies
View Related
Sep 24, 2005
Every form has an on error property.
Is it enough for error handling to code the on error property for each form?
With enough I mean error handling which lets you resume the program.
Ontherwise I have to code (or call a procedure) for each coded event which i wouldn't prefer
For instance now I'm putting error handling in each event but would consider it more efficient if it can be placed once in each form
Private Sub cmdReport_Click()
On Error GoTo Err_cmdReport_Click
Dim stDocName As String
stDocName = "rptOfme"
DoCmd.OpenReport stDocName, acPreview
Exit_cmdReport_Click:
Exit Sub
Err_cmdReport_Click:
MsgBox Err.Description
Resume Exit_cmdReport_Click
End Sub
View 3 Replies
View Related
Feb 1, 2006
Hello All,
I have been developing my database all one seems to be well exept for an error message which is attched.
If anybody can help me trap this error or offer some advice i would be greatfull.
Alastair
View 6 Replies
View Related
Aug 5, 2005
SQL Issue ...
ERROR: Runtime error 3061 - Too few parameters. Expected 1.
------------------------------------------------------------------------
Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " '
* ROLL * & ' " & " ) AND .... )
sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"
ANY HELP WOULD BE APPRECIATED ...
Cheers,
QTNM
View 14 Replies
View Related
Dec 18, 2006
hi guys i was wondering if you can help me this is my code: i have a main form with this code, this form contains a subform linked by the All_PricingID
Set rst = CurrentDb.OpenRecordset("tblAll_Pricing") 'main table
' adding data to the table
rst.AddNew
' Main table
rst!All_PricingID = Me.txtPricingID 'Main table pk
rst!MainContract_ID = Me.cmbMainContract 'combo box in parent form
rst!ItemNumber = Me.txtItem 'Main form text
rst.Update
'sub Table
Set rst2 = CurrentDb.OpenRecordset("tblPricing") 'sub table
For varItem = 0 To Me.lstsubContracts.ListCount - 1 'this is a list in the main form
'--- loop through all the items in the list box and create a new row in the subform for each subcontract in the listbox lstSubcontracts.
rst2.AddNew
rst2!ID = Me.All_PricingID 'sub table foreign key
rst2!SubContractID = Me.lstsubContracts.Column(0, varItem) 'sub table
rst2.Update
Next varItem
'--- close the tables
rst.Close
rst2.Close
Set rst = Nothing
Set rst2 = Nothing
the subform appears correctly with the rows i wanted added but i need the user to be able to edit a column in the subform for the rows just created (my form is on datasheet view). but everytime i move to cursor into the subform, i can't even scroll up and down.
i keep getting an error that says :
The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. (Error 3022)
but when i check my tables tblAll_Pricing and tblPricing , everything is inserted correctly according to my recorset above, do you know why this is happening? and why i am not able to edit my subform. my subform allowsedits and additions.
help!!
View 2 Replies
View Related
Nov 17, 2006
hi,
I am new to this forum and to MS Acess. i am not a software engineer or in the field of software. I had to learn as much as i could about MS Acess because of a project i worked on. I have a standalone MSacess database and one of the forms is giving me trouble when I try to enter a new record
The form is called frm_fragrances and has information about a fragrance.
the frm_fragrances has 4 fields in it and a sub form. the sub form has details about the fragrance
In a new record when I enter the 4 fields and attemt to go to the subform which has details about this fragrance I face this error.
an unexpected error haas occurred @2465: application defined or object defined error.
additional information
Active form:<frm_fragrances>
Active control:<txt_VendorName>
Previous control:<frm_fragrances>@Please call the developer for further instructions
I have looked in the FAQ and on this forum for help on error 2465 and cannot find anything to help me. I can work with forms to an extent but cannot write too much code.
I would really appreciate some help in this matter
Thank you
View 4 Replies
View Related
Dec 31, 2005
I'm from Vietnam and my English is bad. In my database, I have only a table named tblEmployees, which contains these following fields: Employee_ID (data type: text), Name (text), Salary (number) and Allowance (number). I build a form bound to this table. In the footer of this form, I have a textbox control named txtSumSalary that contains the expression: =Sum([Salary]). Everythings is OK. But when I build an another textbox named txtSumAllowance that contains the expression: =Sum([Allowancess]) (I misspelled this field intentionally), the result are error #error in both textbox controls. I don't understand why the textbox txtSumAllowance wrong, the textbox txtSumSalary is wrong too. Help me!!! Thanks a lot!
View 4 Replies
View Related
Jan 21, 2008
Hi. The following message appears when an append query is run in one of my databases "Error No:6; Description: Overflow". I've never seen it before, can't find it in Help - nor anywhere else on the net. All assistance greatly appreciated!
View 2 Replies
View Related
Oct 25, 2004
I have the following code as error handling in a form that gives me Run-time Error 438 "Object doesnt support this property or method" with "Msgbox..." highlighted...
Code:'Error Handling On Error GoTo cmd_icp_catcode_Click_Err'and later in the code' Exitcmd_icp_catcode_Click_Exit: Exit Sub' Error notificationcmd_icp_catcode_Click_Err: MsgBox "An unexpected error hass occurred." _ & vbCrLf & "Procedure: cmd_icp_save_Click" _ & vbCrLf & "Error Number: " & Err.Number _ & vbCrLf & "Error Descricption:" & Err.Descricption _ , vbCritical, "Error" Resume cmd_icp_catcode_Click_Exit
I can provide any more info that you need... I am just surprised because i have used the same code on several forms before and this has never happened!
thanks a lot!
View 1 Replies
View Related
Apr 26, 2005
Hi,
I have a database networked with about 8 users. We have been having a problem recently with a specific table. Occasionally, when a user opens a specific form based on this table the entire form is whitened out. When I open the database there is no major curruption, but then when I check the specific table I always find one record with "#Error" shown in every field. I cannot delete the record (invalid argument), so I compact & repair the database and the bad record changes all fields to "##########". Then I can delete the record and all is fine.
Any thoughts on what can cause this kind of error ?
Thanks
Jackson
View 2 Replies
View Related
Jul 4, 2005
I'm getting the following error when I try to switch to design view. Also I can't close the database: :(
"You can't switch to a different view at this time.
Code was executing when you tried to switch views.
If you are debugging code, you must end the debugging operation before switching views."
View 2 Replies
View Related
Jul 28, 2005
Let's say we have a table in which one of the fields is Date. Now let's say we want to create a simple report from that table, but the user has to pick the date interval. So, the report will have to display records only from X date to Y date. We create then a form called Report with 2 fields for the user to input the X date and the Y date to create the interval. Then we make a query from that table, and on the criteria of Date, we put the following expression:
Between [Forms]![Report]![DateX] And [Forms]![Report]![DateY]
Well, that's what I've always done when I want to create a report based on a date interval input by the user and it always worked.
But now I've got a problem. Instead of making a query, I made a crosstab query from the table, to make the report easier to read. And again, on the date criteria I put the same expression, but it won't work on the crosstab query. I always get this error message:
"The Microsoft Jet database engine does not recognize '[Forms]![Report]![DateX]' as a valid field name or expression."
Why does this expression work on a regular query but not on a crosstab query?
Also, any ideas on how to create this report on the date interval provided by the user and using the crosstab query?
View 14 Replies
View Related
Nov 23, 2005
I have entered the following code below, but when I run it it doesn't work I a get an error:
Public Sub ExportOrderDestination(TableName As String, intNumber As String, YourOrderNumber As String, SalesRep As String, JobNumber As String, Terms As String, inNumber As Integer, valueOrderNumber As String, valueSalesRep As String, valueJobNumber As String, valueTerms As String)
DoCmd.SetWarnings False
Dim strSQL As String
Dim recordSet As Database
Dim strSQLTwo
strSQL = "INSERT INTO [" & TableName & "] ([" & intNumber & "],[" & YourOrderNumber & "],[" & SalesRep & "],[" & JobNumber & "],[" & Terms & "]) VALUES (" & "SELECT invoiceID FROM Invoice-Address WHERE CustomerNumber = " & inNumber & ",'" & valueOrderNumber & "','" & valueSalesRep & "','" & valueJobNumber & "','" & valueTerms & "')"
MsgBox strSQL
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True
End Sub
Any help would be greatly appreciate it.
View 9 Replies
View Related
Nov 29, 2005
i just created a audit trail in my DB... however upon update and saving my changes... i get an error msg "13 - Type mismatch"... help pls... thankew in advance...
View 2 Replies
View Related
Feb 10, 2006
When I try to import an excel file into my access 2000 database, I get the following error message
"an error occurred when trying to import... the file was not imported
View 1 Replies
View Related
Sep 13, 2006
Hi,
I have three tables that are joined and I wanted to create a query that would return all records from one of the tables and only those matching from the other table.
I used Access properties window that does that; however, when I try to execute the query, it prints this message:
'The SQL statement could not be executed because it contains ambiguous outer joins. To force one the joins to be performed first, create a seperate query that performs the first join and then include that query in your SQL statement.'
This is my query:
SELECT tblSite.Site_No, tblPhase.Phase_No, tblSite.Name, tblHouse.House_ID, tblHouse.Plot_no, tblHouse.House_No, tblHouse.House_Address, tblHouse.House_P_Code, tblHouse.House_Type, tblHouse.Gross_Floor_Area, tblHouse.No_Of_Apartments, tblHouse.Number_Of_Bedrooms, tblHouse.House_Width, tblHouse.House_Depth, tblHouse.Garage, tblHouse.Phone, tblHouse.Electricity_Meter_Reading, tblHouse.Gas_Meter_Reading, tblHouse.Water_Meter_Reading, tblHouse.Customer_Handbook_Completed, tblHouse.Anticipated_Councial_Tax_Band, tblHouse.Missives, tblHouse.House_Price
FROM tblSite INNER JOIN (tblPhase RIGHT JOIN tblHouse ON tblPhase.Phase_No = tblHouse.Phase_No) ON tblSite.Site_No = tblPhase.Site_No;
I can't get it to work and I will appreciate any help please.
regards,
B
View 7 Replies
View Related
Sep 26, 2006
I have a company database written in Access 2003.
Recently every time I try to program something or change something in it I get:
The report name "MonthlyStock" you entered in either the property sheet or macro is misspelled or refers to a report that doesn't exist.
I had a report named MonthlyStock a few weeks ago but it was deleted, in the form that called the report the reference to it was deleted as well.
I've searched the database and there's no record in any of the code of any reference to this report.
I think it might be to do with tools/options/general/Name AutoCorrect.
I had this turned on for a month or so (can't remember why). I've now turned it off but I'm still getting the above message every time I try to do anything at all in the database.
Please help this is a company database and this error is causing chaos.
thanks
View 1 Replies
View Related
Apr 30, 2007
Hi,
Just got a new PC here, and now when I try and run a query I have in my database I get this error. I never got it with my old PC, and not sure how to fix it?
Any ideas?
View 1 Replies
View Related
May 9, 2007
I have column value which is text and have missing value. I want to chang it to numerci.
table1
value
2
3
5
8
7
the code iff(clng(value)>5, 1, 0) as newv
will give result
value newv
2 0
3 0
5 0
#error
8 1
#error
7 1
I do not want error to be three, I want it to be 0 or missing. how can i do that? Thank you very much.
Jeff
View 12 Replies
View Related
