I have fronend and backend database. I have all data stored in another database (backend) and that database is password protected. I need to export some selected data into Excel which is created in the same process. Below is the code:
Code:
Private Sub ExportLeaversList(strWorkbook As String)
On Error GoTo ERR_HANDLER
Dim objApp As Object
Dim strExcelFileName As String
Dim varStatus As String
Dim strTempQueryName As String
Dim strSelectSQL As String
Dim strPnPDatabaseName As String
Dim strPnPDatabasePassword As String
Did any one get a error message like the one below: “ Run-time error ‘3061’: Too few parameters. Expected 1. “ Basically I have a form with a command button and a combo box. The combo box's row source property is set to the following sql:
SELECT DISTINCTROW tblProjts1.intProjectID, tblProjts1.chrProjectName FROM tblProjts1 ORDER BY tblProjts1.chrProjectName;
I have a command button which runs the following procedure (Thanks, credit goes to madrav72): Private Sub cmdSendToExcel_Click() Dim db As DAO.Database Dim rs As DAO.Recordset Set db = CurrentDb
'Set rs = db.OpenRecordset("qryOne", dbOpenSnapshot) Set rs = db.OpenRecordset("qryTwo", dbOpenSnapshot)
'Start a new workbook in Excel Dim oApp As New Excel.Application Dim oBook As Excel.Workbook Dim oSheet As Excel.Worksheet
Set oBook = oApp.Workbooks.Add Set oSheet = oBook.Worksheets(1)
'Add the field names in row 1 Dim i As Integer Dim iNumCols As Integer iNumCols = rs.Fields.Count For i = 1 To iNumCols oSheet.Cells(1, i).Value = rs.Fields(i - 1).Name Next
'Add the data starting at cell A2 oSheet.Range("A2").CopyFromRecordset rs
'Format the header row as bold and autofit the columns With oSheet.Range("a1").Resize(1, iNumCols) .Font.Bold = True .EntireColumn.AutoFit End With
oApp.Visible = True oApp.UserControl = True
'Close the Database and Recordset rs.Close db.Close
End Sub qryOne: SELECT tblProjts1.intProjectId, tblProjts1.chrProjectName, tblProjts1.chrBlrPropNum, tblMaxLoad.* FROM tblProjts1 INNER JOIN tblMaxLoad ON tblProjts1.intProjectId = tblMaxLoad.intProjectId;
qryTwo: SELECT tblProjts1.intProjectId, tblProjts1.chrProjectName, tblProjts1.chrBlrPropNum, tblMaxLoad.* FROM tblProjts1 INNER JOIN tblMaxLoad ON tblProjts1.intProjectId=tblMaxLoad.intProjectId WHERE (((tblMaxLoad.intProjectId)=Forms!frmReprtSelen!cb oProj));
My problem: When I run cmdSendToExcel_Click procedure with “ Set rs = db.OpenRecordset("qryOne", dbOpenSnapshot) “ it loads the excel and export the data to Excel without any problem. The Excel spreadsheet will show the rows as follows: ProjtIdProjName Column3Column4 Column5, etc 8Bechtel xxxyyy 9WOPS aaabbb 11Spring zzzttt 12AgP mmmnnn
But when I run with Set rs = db.OpenRecordset("qryTwo", dbOpenSnapshot), I get the error “Run-time error ‘3061’: Too few parameters. Expected 1.”
I even tested the qryTwo using a separate command button with the following code on the click event: stDocName = "qryTwo" DoCmd.OpenQuery stDocName, acNormal, acEdit and it produces the single row based on the projectId selected on combo box (as shonw below in datasheet view): ProjtIdProjName Column3Column4 Column5, etc 8Bechtel xxxyyy
Does any one have any clue what this error 3061 is? Please help. I am struggling almost a week to figure this out, NO LUCK.
I am trying to export from Access to Excel. I am relatively new to this process. I am receiving an error that I am not using a valid path. I have tried to recreate the former path without any luck.
What I had done was to delete some old information that was making the former Excel sheet too large and create a more up to date database. I had to reformat the spreadsheet and export the new information to excel but when I pull it in it will not pull into the shared network drive without giving me the error message.
I'm trying to export queries from access to excel using the DoCmd option. The code (see below) works to a point - it exports some of the queries before I get a run time error:
"31532: Microsoft Access was unable to export the data".
The worksheet tabs also do not pick up the query name but instead return what looks like a temporary ID (e.g. ~TMPCLP118431). Have tried different file locations and versions of excel but the same thing keeps happening.
Code: Sub ExportAllQueries() Dim qdf As QueryDef Dim db As Database
I routinely export queries etc from my development database to the 'live' master database used by users. Every so often I get the error message 'The database Mydatabase.accdb is read only'. Then I can't export anything to it. I don't know why it should suddenly become read only. How do I make the database changeable, and not read only?
I using excel 2010 and access 2010. I have VBA script runtime error 3011 when running script. It has problem finding access report. First I was passing in as variable with the name. Then I used a script to pull in the report name from access and it is still failing with same error.
Code is shown below.
Private Sub Command29_Click() Dim reportname As String Dim theFilePath As String, FilePath As String, tempStr As String ' reportname = Me.My_DBTableName
I often have to export data from a table to a .csv (text) format. It is very important that the data remains in the right order. I even add an indexed auto number to ensure this happens. Sometimes, but not always, the data gets out of order. Not completely scrambled but chunks of records just in the wrong place.
Has anyone come across this before or got any idea what causes it?
It works actually but when i go back to Access i get the following error message
runtime error 424, object is necessary.
Code: Private Sub Befehl1_Click() Dim xlApp As Object 'Excel.Application Dim xlBook As Object 'Excel.Workbook Dim xlSheet As Object 'Excel.Worksheet Dim rstID As DAO.Recordset, tmpStr As String
I am using Access 97 & Excel 97 for this problem. I have a Access query which takes the contents of three tables and exports them to Excel. However, the query has now reach 69000+ records and increases by about 1000+ records ever month. So what I need to do is create as many WORKSHEETS within a single Excel WORKBOOK as necessary to accomodate all of my Access data. I have written a piece of code which will create seperate WORKBOOKS for each 65000+ of records but then what I want to do is code the almagamation of these WORKBOOKS into 1.
In short, after the first WORKBOOK is created I use code to make that the active WORKBOOK and then I want to import into that the other WORKSHEETS in the other WORKBOOKS.
I am using the folowing DIM's:
Dim X As New Excel.Application Dim WkBook As Excel.WorkBook Dim WkSheet As Integer Dim ExcelSheet As Excel.Worksheet
ExcelSheet therefore is the current WORKSHEET within the Excel spreadsheet I want to import into.
Any advice on the command to perform a transfer of WORKSHEET data between Excel WORKBOOKS?
I need to export data from a table in Access to a fixed length record text file and would like to find out how to export a number field into this text file with leading zeros.
The text file requires this 999999.99 and right justify and zero fill. My question is this: how can I zero fill from the table to the txt file? I went through the export wizard and couldn't see how to do it.
Hi, I use the built in tools "Analyze data with excel to export" to export data from froms to excel and it works fine. The only problem is in the form and table I had specified 3 decimals but in excel the data is two decimals and I have to always reformat the cells manually to 3 decimals.
Any way to have this set when exporting even if I have to use VBA code.
When equipment is returned to our company the details are put into an access database, then the same details are filled into a excel sheet to be printed and handed around for other depments to fill in by hand then sign. I have been asked to see if it is possible to alter the database so that the appropriate parts of the excel sheet could be filled in automatically. You can see an example below, its only the sales section that comes from the database the rest is filled in by hand.
Is it possible to setup a query that would ask for say the RER number and serial number to find the correct record then export the data to fill in the right cells; or is it easier for me to try and recreate the excell sheet as an access report and have it filled in that way.
I am trying to export a table from access excel spreadshhet.. but not in the simple traditional way.
I have 140 lines of data, I need a marco to take this single table and 140 lines and create 140 spreadsheets one each line of data appearing on one of the sheets. Id also need the title of the spreadsheet to be in one of the fields in the actual spreadsheet.
I have a Form which contains a datasheet and I have some code which allows users to custom sort this datasheet. Another table based on this datasheet is then exported as a csv file. However, the data is obviously not exported in the same order as the datasheet and it is quite critical for the application to be a sucess that it is exported in the custom order chosen by the user.
I have done some re-search, searching groups, forums etc and found the solution of having a 'sort column' in the table the datasheet relates to, I can then use this in the query that exports the data. My only problem with this is I had to manually fill in this sort column in the datasheet, once I had decided upon my final sort order. Is there anyway to fill this column automatically based on a row's position in a datasheet?
Ok, I have a question. It might be a ridiculously simple question. Also, i'm under the impression that I may have to learn some VB, which i'm okay with. I've never really used MS Access, it has sat neglected on my desktop for a number of years and now I am starting to see just how powerful it is. By the way, I'm Jamie, nice to meet you all :) Now, onto the questionWhat i'd like to do is take the following database (for example)field1 = namefield2 = locationfield3 = favourite movieNow, i'd like to generate the following text from this database, for each entryDear <<name>>I once knew a man from <<location>>Was never really much of a <<favourite movie>> fan.Optionally, i'd like it to store the text for each seperately generated document in a file named <<name>>.txt, but that isn't needed urgently.It reminds me of a mail merge I learned to do a few years back in high school using appleworks (I am assuming it was appleworks).Anyway yes, thankyou in advance for any help with this.Jamie
I'm new member this site.I have a problem my access project and I have request help you.
My problem. My project has two table and two form .Order (Main Table&Main Form) and Order_Subform (Sub Table&Sub Form) When i click 'Send to Excel' button in Order form it's sending data to Excel file Order.xls but it's only sending one line in order_subform to Excel Order.xls. it is not sending other line. I hope, could I able to explain my concern
Hi guys, this might be a quickie, I did a quick search but couldn't find anything :/
Basically my database creates a table which some people would rather analyse within excel because they're not comfortable with access. I can get the table exporting to an xls file no problem, howeevr what I would like is for the database to export the file and open the file in excel at the same time so the user doesn't need to open up excel and find the file etc...
I created a form which is opened by a query, it displays several fields. I need to find a way to export/add these results into a new access table. I need to do by using a button..
In Tbl_Output's 3rd column, only the Columns names: Name, Age and Location are repeated for each person and not column names ID1,ID2 (only its data xxx,yyy etc. is required in columns 1 and 2 as shown).
I was helped by rpeare with a VBA module that gives a single column output in Tbl_Output as
Mike 25 Essex Jack 32 Surrey Bob 36 Newcastle
The code is:
Sub main()
Dim db As Database Dim rstElements As Recordset Dim sName As String Dim sNumber As String Dim sArea As String Dim freefile Dim Filenumber As Integer Dim sSQL As String
Set db = CurrentDb Set rstElements = db.OpenRecordset("tbl_elements") rstElements.MoveFirst
sSQL = "DELETE * FROM Tbl_Output" db.Execute sSQL
Do While rstElements.EOF <> True sName = rstElements.Fields(1) sNumber = rstElements.Fields(2) sArea = rstElements.Fields(3)
My question is when exporting an access table to a text file using a fixed file format can you combine two fields into one field and if so how do you do it.
code that will allow me to take data [All Fields] from a Table in my Database and Insert them into another identically structured Table in another MS Access accdb Database.I would also like to filter for records older than a month [MyDateField]
I have tried the following code I found on line. It doesn't throw an error . . . but it doesn't perform the Insert either.
Code: Dim ws As DAO.Workspace 'Current workspace (for transaction). Dim db As DAO.Database 'Inside the transaction. Dim bInTrans As Boolean 'Flag that transaction is active. Dim strSql As String 'Action query statements. Dim strMsg As String 'MsgBox message.
